Part # GOKIT32SALT
Alternate Part #'s PL1062, AEQGOKIT32V
Tune up kit for the Pentair Whisperflo pump when used with a salt chlorine generator. The heavy duty parts in this kit are designed to withstand exposure to salt.
We highly recommend replacing the shaft seal, o-rings and gaskets when replacing your motor. If you use your old shaft seal, it will not mate up properly with the new motor and may leak. Our tune up kits include the shaft seal and all o-rings, gaskets and lubricant for your pump.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For More Pool Pump Motors
Is this the correct kit for a super-flo 1HP saltwater pool?
Reply
Will this kit fit whisper flow WFE-26, I will be replacing the motor and have converted to salt water
Reply
Hello. The Tune-Up Kit, GOKIT32SALT, is compatible with the Pentair Whisperflo Pool Pump model WFE-26. It contains the parts necessary for replacing the pump motor and a saltwater conversion.
Reply
Will the go kit 32 salt work for my whisper flo we-24? I have a chlorination so I want the saltwater version. See below pictures, I have a century motor.
Hello Tom. The GOKIT32SALT is compatible with the Pentair WhisperFlo model WF-24. Attached please find a Pentair WhisperFlo exploded parts diagram for reference. Pentair Whisperflo Pump
Reply
I have a Whisperflo Model WFE8 for a saltwater pool. Is the GOKIT32SALT the right kit for this pump?
Reply
Hi Brad, the GOKIT32SALT will be perfect for your WhisperFlo WFE-8 pump and saltwater pool.
Reply
Will this work on Pentair Whisperflow WFDS-28 dated 4-15-2008? I noticed that when purchasing the individual gasket for the plate there were two different items based on date of unit (pre-08 and post-08). Please advise.
Reply
Hello Steven. The GOKIT32 SALT contains parts that are compatible with the Pentair Whisperflow WFDS-28 dated 04-15-2008. The Seal Plate Gasket design change transitioned between 01-31-08 and 02-01-08. The GOKIT32SALT contains the Seal Plate Gasket for pool pumps manufactured after 02-01-2008.
Reply
I have a WFE-6 Whisperflo pump. part no. O-177451-03. Pool is salt with a chlorine generator. Will this kit work on a pre 2008 pump as our was installed in 2007. Also what bearings are required as they need replaced also.
Reply
Thank you for contacting Inyo Pools, Yes this is the correct Go kit for your pool pump.
Reply
I have a Pentair WFE-6 WhisperFlo pool pump. Installed in 2007 pre 2008. It is a SALT pool. Will this kit work with pre 2008 pumps? I also need the two motor bearings with this kit.
Reply
Thank you for contacting Inyo Pools, Yes this Gokit32Salit will work on your pump.
Reply
What bearings do I need?
Reply
Unfortunately, we do not have the listing for the Pentair Motor bearings, you may contact them directly at 1-800-831-7133 or remove the bearings and check for the numbers on each. How To Replace the Bearings in a Pool Pump Motor - Part I https://www.inyopools.com/HowToPage/how-to-replace-the-bearings-in-a-pool-pump-motor.aspx
Reply
I have a Pentair WFE-6 WhisperFlo pool pump. Installed in 2007 pre 2008. It is a SALT pool. Will this kit work with pre 2008 pumps? I also need the two motor bearings with this kit.
Reply
Hello Michael. The GOKIT32SALT is the Correct Tune Up Kit for the Pentair Whisperflo model WFE-6 in a slat water pool application. Motor bearings are specific to the motor and not the pump model. Please provide a motor model number and a recommendation can be made. This information can be found on the motor label.
Reply
do you have a video on how to replace the shaft seal and o rings for the gokit32salt? I do not want to damage anything. I do have a new pump coming as well.
Reply
I ordered a new pump. What is the correct go kit?
For a chlorine swimming pool, you would need the GOKIT32 that you can view by clicking here, and for a saltwater pool, you would need the GOKIT32SALT that you can view by clicking here.
Reply
Do you have instructional videos on putting seal on with a new version of this pump. I did order the gokit32salt.
Pete, We do not have a video of our own, however, you can find one on YouTube. Yes, GOKIT32 or GOKIT32SALT is the kit you will need.
Reply
How often would you recommend using a tune up kit on a salt water pool?
Reply
Hi Paul, I recommend using a tune-up kit as soon as the shaft seal begins to show as leaking. That will require regular brief inspections of the pool pump.
Reply
i purchace a go kit 32 salt for my wf-26 wisperflow,does the porcelain side of the seal that goes on the impeller face in towards the impeller or face out. i have checked the tutorials & they dont seem to help.
Hi James, I have attached a photo of the proper orientation. Also, we put together a brief video here which Explains the Porper Orientation of Pool Motor Shaft Seal - Video.
I have a whisper flo 2hp B2748. Need to replace motor. and looking to get a tune up kit and new impeller.. will this kit work?
Reply
Is GOKIT32SALT the right shaft seal to use when replacing A. O. Smith SQ1302Z1 (see attached photo)?
Hi, Joseph. We will need to know the make and model of the pump housing in order to determine the right kit for your pump.
Reply
Hi I have a Century centurion AO Smith B849 with this kit fit this pool motor?
Reply
Hello, We will need to know the make/model of the entire pump. Can you please send a side view picture of the pump so I can confirm which kit you will need?
Reply
I have a Pentair Intelliflo #011018 and after the pump turns off, I am hearing a hissing sounds coming from between where the metal pump attaches to the plastic housing of the strainer basket so I assume I need to replace the seal. I called Pentair and they gave me part #ORK1000V. Is this the same as this kit with part #GOKIT32SALT?
Reply
Yes, this is the correct seal kit for your model pump in a saltwater swimming pool.
Reply
I have a Pentair Variable Speed Ultra Energy Efficient Pump for my salt water pool with what I believe is a bad shaft seal. I would like to replace the shaft seal, Diffuser O-ring, and housing gasket, will this kit work with my model? Are they OEM parts and if not, would I be better off getting OEM parts?
Reply
Hi, Dave. This tune up kit will work with the IntelliFlo VS Pump. These aftermarket parts will work just as good as the OEM parts.
Reply
Does the tiny O-Ring in the GOSALT32 Kit replace the washer Mfg Part No 075713? I can't find any other use for it. If not, I'll need to order the washer too.
This is for the Pentair WF-24 impeller screw
Reply
Hi, Robert. Yes, it will replace Part # 075713.
Reply
Does the washer need to be removed when replacing the seal, and then place just the tiny o-ring on the impeller screw shaft? The o-ring is not the same diameter as the washer; it is smaller. I was sent APCK1027A gokit for Whisperflo WF-26, saltwater pool, which also contains a tiny o-ring, but no washer.
Reply
will this kit work with part# 011773, pmp WF-26 1.5 HP ser.# 0326198070326w saltwater pool
Reply
Hi, Byron. Yes, this Whisperflo Saltwater Tune Up Kit - GOKIT32SALT will work with your model pump.
Reply
will this seal kit work on a WF 30 pump.
P/N 011775?
It is a saltwater system.
Thanks
Reply
Hi, Kevin. Yes, this Whisperflo Saltwater Tune Up Kit - GOKIT32SALT will work with your model pump.
Reply
Does this kit work with a Century B2853 motor?
Reply
If you have the Pentair Whisperflo pump then yes. If you are not sure of the pump model then you can always email us some images of the pump to upload@inyopools.com so we can assist in identifying it.
Reply
what seal comes in the go kit 32? Is it U.S. Seal Manufacturing Pump Seal 200, Heavy Duty PS3867 (Saltwater Pools)?
Reply
This kit comes with the salt water heavy duty psr1000 seal, the seal plate gasket, the diffuser o-ring, the pump lid o-ring and a small patch of lubricant.
Reply
Will GOKIT32SALT work with Pentair 340039 SuperFlo?
Reply
Hi Michael, This Whisperflo tune up kit is not compatible with the Pentair Superflo pump. You will have to purchase the Shaft Seal, o-rings and gasket separately.Those parts can all be found on the Pentair Superflo Parts page.
Reply
I just received a tune-up kit APCK1027 FROM YOU. i HAVE A SALT CHLORINATER. WILL THIS TUNEUP KIT WORK? i ALSO RECEIVED A NEW PUMP FROM YOU. iF THE TUNEUP KIT SHOULD NOT BE USED, SHOULD I WAIT TO INSTALL THE MOTOR UNTIL I GET THE RIGHT TUNEUP KIT?
Reply
Hi James, The APCK1027 kit will work if you have a saltwater pool the but saltwater shaft seal will provide additional protection.
Reply
I have a Pentair Whisperflo model WF-26, part #011773. 1.5 HP. The motor is part #177475. The pool has a salt water chlorine generator. Does this package work for my model pump? Can you tell me who makes the seal in your kit? Also I believe based on the noise from the pump, that my motor bearings may be going bad. Do you also sell bearings for this pump motor? If so, which ones are compatible? Thanks!
Reply
Hi, The Pentair/Purex Whisperflo Saltwater Tune Up Kit is manufactured by Aladdin Equipment Co. and will work for your Pentair Whisperflo model WF-26 pump. You will need 2 203 Bearind (62032RS) based on the motor p/n you provided.
Reply
We have recently changed all of our pools and spas over to salt generators. Is it necessary or advisable to change seals and "o" rings? We seem to have started having pump problems.
Reply
Hello Ed - We would recommend a salt seal kit for salt chlorinated pools. The seals are more durable and will better protect the pump.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
I just finished replacing the shaft seal on my booster pump. As soon as I turned the pump on water was leaking from the shaft seal. Is it defective or am I doing something wrong?
Reply
Depending on the model, the installation of a booster pump shaft seal can be slightly different than a pool pump shaft seal. Some booster pump and pool pump shaft seals require that a silicone sealant be used on the outer areas of the metal seat of the shaft seal. The seal will need to be lightly hammered into the body of the pump. You can use a 1 inch PVC coupling or a piece of 1 1/4 inch PVC pipe and a rubber mallet. This procedure will apply to any pool pump or booster pump using a >PS-1000 style shaft seal.
Reply
Less than 1 hr
Rubber t mallet and 1” pvc coupler.
Straight forward process. Just follow Inyo YouTube video. Keep in mind that the parts included in the kit will accommodate several different pumps so the will more than likely be spare parts. Lubricate freely to insure no leaks. Mine went together with no problems
The actual installation of the seal kit required no tools except for a rubber mallet to put in the bushings
1 to 2 hrs
Pliers, Socket Set, Wrench Set, Adjustable Wrench
1 0
My waterfall pump stopped working which I diagnosed as the motor attached to my Whisperflo WF-26 failing which I diagnosed to be the motor dying after the old seals allowed water to leak into it. To resolve, I purchased this Tune up kit which made the replacement of the motor and overhaul of the pump simple.
I removed the old motor, used the high quality salt shaft seals from this kit, and reattached everything using new gaskets and included lube. Put everything back together, sealed up tightly and the pump worked great on the first try with no leaks.
2 to 4 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set
once the motor and impeller were removed it was easy to replace the gaskets. remember to clean all surfaces before using the new gaskets and the silicone that was included helps keep them in place and get a better seal.
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set, Adjustable Wrench
Replaced the motor and used the seals and gaskets in the "Saltwater" Go Kit to make the repair. Everything I needed great & knowledgeable service personnel, fast delivery and good prices.
2 to 4 hrs
Screwdriver, Nut Drivers, Socket Set, Adjustable Wrench
1 to 2 hrs
Nut Drivers, Socket Set
1 0
I searched for a replacement motor and few sites gave the replacement model numbers for the replacement motors they carried. INYO pools provided the exact model number matching the A O Smith motor they inventoried.
I simply placed the order and had it at my doorstep in a couple days. I am impressed with the prompt service. Having your filter pump out in the peak of summer in Southern Louisiana can wreck havoc on a saltwater pool. However, INYO Pools was prompt and I was able to quickly replace the motor with the necessary replacement O-ring kit.
A note on replacing the pump shaft seals; to remove the old seal, I used a 3/4" PVC collar to tap out the seal and a 1" PVC collar to seat the seal. It worked perfectly.
The Most Helpful Review
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Perfect fit. No problems installing.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Fit perfectly.Easy install.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
The tune up kit worked well - the pump is not leaking so it worked.
Was this review helpful to you?
(5 out of 5 stars) Easy DIY kit
Reviewed By: Inyo Customer ()
Everything you need and all parts fit well
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Inyo Customer ()
Delivered quickly and with the motor we purchased. Definitely recommend this replacement kit when installing a new motor.
Was this review helpful to you?
(5 out of 5 stars) sealed up
Reviewed By: Inyo Customer ()
excellent selection and every seal needed for rebuilding a whisper
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Love it
Was this review helpful to you?
(5 out of 5 stars) Fit perfect
Reviewed By: Inyo Customer ()
Fit perfect
Was this review helpful to you?