By PureLine



Part # PL8111

Manufacturer Code 8111

Dimensions 20" L x 13.5" W x 1" D

Alternate Part #'s 001-1140, 8111, AP8111

Product Description

Generic fine filter bag for many Aquabot® robotic cleaner models (see list below).

  • Same quality as OEM replacement bag
  • Fine material catches debris as small as 2 microns
  • Filters small particles such as dirt, silt, algae, bacteria, pollen
  • Also collects larger debris like leaves, hair, bugs, acorns
  • Washable and reusable
  • This is the After-Market Filter bag for the Aquabot® and not manufactured by Aqua Products

Works on the following robotic pool cleaners: 
Pool Rover Junior (Thru 2010)
Pool Rover (Thru 2010)
Pool Rover Hybrid (2011 - Present)
Pool Rover Plus
Aquabot® Turbo T-Jet
Aquabot® Turbo G-Jet
Aquabot® (Thru 2010)
Aquabot® (2011 - Present)
Aquabot® Storm
Aquabot® Turbo
Aquabot® Xtreme
Aquabot® Elite Remote Control
Aquabot® Supreme
Aquabot® Turbo T
Aquabot® Turbo T Remote Control / Aquabot® T-Solo Remote Control
Aquabot® Turbo T2 (2006 - Present)
Aquabot® Turbo T4
Remote Control (2006 - Present)
Thunderjet Above Ground And Thunderjet In-Ground
Pool Butler
Aquabot® Plus Remote Control
Aquabot® Turbo T2 (2004 - 2005)
Aquabot® Turbo T4 Remote Control (2004 - 2005)
Aquabot® Solo Remote Control
Aquabot® Turbo Remote Control
Pool Demon
Pool Demon T
Aquabot® XL
Blue Pearl
Blue Sapphire
Blue Diamond®
Blue Diamond® Remote Control
Cobia XL
Verro 100
Verro 300
Verro 500
Kreepy Krauly® Prowler® 710
Kreepy Krauly® Prowler® 720
Kreepy Krauly® Prowler® 730
Aquamax® Junior HT
Aquamax® Junior Plus
Ultramax w/Infrared
Ultramax w/Air Sensor
Duramax Junior HT
Duramax Duo
Duramax Trio
Jetmax Junior
Jetmax Ultra
Power Handi Vac 100
Power Handi Vac 200
Power Handi Vac 300


All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.

Product Specifications


?     Asked on 4/7/2012by Guest

Will this bag fit a Aquabot Turbo T model?

A  Answered on 4/7/2012 by InyoPools Product Specialist Patrick P.

Yes this fine filter bag is designed to fit into the Aquabot Turbo T Model.

?     Asked on 7/17/2016by b glisson

will this bag retain dead algal cell walls, following algicide for a bloom?

A  Answered on 7/18/2016 by InyoPools Product Specialist Alan M.

The fine mesh filter bag will filter fine particles of debris including debris from an algae bloom.

?     Asked on 4/17/2017by Lynn Shelton

Will this bag fit Robot Fury.... P/N RBU-3B RPA-FUROO ?

A  Answered on 4/17/2017 by InyoPools Product Specialist Patrick P.

Yes this bag is the bag used on the Aquabot Fury Robotic Pool Cleaner.

?     Asked on 8/3/2017by Inyo Visitor

We had a bad storm here yesterday...alot of debris from our 70ft. pine tree...needles, cones, small twigs. Cleaned pool this am with Aquabot...filter bag now has pine sap all thru it. How can I get rid of that. I realize I cannot use detergent or bleach...rinsing with hose does not get it off. Any suggestions? Aquabot did a great job cleaning my 18 x 34 ft. above ground pool.

A  Answered on 8/5/2017 by InyoPools Product Specialist Alex V.

Ralph, The bag will be difficult to clean without any harsh detergents. I would recommend replacing the bag. 

?     Asked on 8/26/2017by erin lucas

Hi! Will this filter fit DuraMax BiTurbo T RC

A  Answered on 8/26/2017 by InyoPools Product Specialist Lennox H.

Hi, Erin. This bag will not fit, you can use either the Fine Bag - 8101 or the Mesh Bag - 8201.


Est. Repair Time

Less than 1 hr

Tools Needed


Needed a new bag

Written on 7/12/2018 by Guest

Simply stretch the elastic around the housing and one minute later it is installed.

Were these instructions helpful? 


Review Summary

 (Average 4.3  out of 5 stars)
10 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews