Pureline Replacement Large Lens Gasket, Compatible with Pentair® Amerlite & SAM lights - 79101600Z

$35.99

IN STOCK
FREE SHIPPING

Part # PL5851

  5 Average  

Details

Top

Part # PL5851

Manufacturer Code 79101600Z

Alternate Part #'s ALDO-170-0, APCO2030

Product Description

PureLine PL5851 8-1/4" replacement lens gasket is an After-Market Gasket for the Pentair® Amerlite and SAM lights.  Replaces the OEM lens gasket 79101600.

The lens gasket provides a seal between the face ring and glass lens to prevent water from getting inside the fixture.

It is strongly recommended to replace the lens gasket when replacing a pool light bulb.  Over time, use, heat, and chemicals will compress the gasket and can cause it to fail.  A light bulb change is the perfect opportunity to replace this very important seal.

Click here for replacement light bulbs

Disclaimer:

All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.

Product Specifications

Manufacturer:
Pureline
Color:
Pentair® Lens Gasket
Pool / Spa Type:
Pool
Volts:
12 & 120 V
Watts:
All W
Top

?     Asked on 5/3/2020by John Jensen

I have an in ground pool with a Pentair Mod. Sunlite LTC light. Do you have a 12 Volt LED lamp assembly that will fit in my pool light nitch? I will need a 12 volt power supply.

 Reply

A  Answered on 5/6/2020 by InyoPools Product Specialist Alex V.

John, You will be able to use the Pentair Intellibrite Spa light. You can select what cord length you need.  Since you will be using  12v, you will need a PX300 transformer
 Reply


?     Asked on 3/31/2018by Inyo Visitor

I have an American Products model R-300 BC 12 volt light...would like a LED bulb and gasket please
 Reply

A  Answered on 4/1/2018 by InyoPools Product Specialist Patrick P.

This would be the proper gasket and you will need this PureLine PureColors 12V LED Color Changing Bulb
 Reply


?     Asked on 7/8/2017by John

Yes, do you have any candelabra bulbs for a pentair pool light?
 Reply

A  Answered on 7/10/2017 by InyoPools Product Specialist Joe S.

At this time there are no LED's that will fit in a Candelabra based unit. 
 Reply


?     Asked on 6/13/2016by bob

I have a Pentaire inground pool light. numbers are 7824 xxxx, 792066xx, 250 watts, 120 volts. bulb type is T4. have 2 lights. need 2 gaskets, like to upgrade to LED. which bulb? thanks, bob
 Reply

A  Answered on 6/13/2016 by InyoPools Product Specialist Patrick P.

Hi Bob, Unfortunately there is not a replacement LED bulb for the T4 bulb type. You would need to replace the complete fixture with this Amerilite Light Fixture and this 120V 35W PureColor LED Bulb
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

When replacing the pool light I needed the gasket

Written on 5/4/2020 by Guest

The gasket is the easiest part of replacing a pool light. Just pull off and fit back on

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

changed bulb to a led, old gasket leaked

Written on 11/26/2016 by Terry J.

replaced bulb and gasket together [recommended]

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
 
(2)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews