Toggle Switch and Canopy Kit for 56Y 2-Speed - 2512558-001

Part # 2512558-001

By Century Motors

  4.67 Average  

Details

Top

Part # 2512558-001

Product Description

Toggle Switch and Canopy Kit for 56Y 2-Speed

Top

?     Asked on 6/11/2021 by Diana L.Cooksey

I purchased a pump motor 5282-5 or manufacture B2983 (?) yesterday this motor does not com with the High Low switch what is the right switch part # for this motor?

 Reply

A  Answered on 6/11/2021 by InyoPools Product Specialist Craig C.

Hello Diana.  The Century Motors Toggle Switch and Canopy Kit part #2512558-001 is the compatible Hi-Lo switch for the Century Motor Dual Speed motor model B2983.
 Reply


?     Asked on 8/28/2020 by Leslie

How do this switch change from high to low speed?
 Reply

A  Answered on 8/28/2020 by InyoPools Product Specialist Lennox H.

Hi, Leslie. You can change the speeds by moving the toggle switch Up for High, middle for Off, and down for Low.
 Reply


?     Asked on 7/31/2020 by Laurie

can this switch be used with the century B2980 motor ?
 Reply

A  Answered on 12/15/2020 by InyoPools Product Specialist Hector F.

Hi Laurie, yes this toggle switch is compatible with the motor catalog number B2980. 
 Reply


?     Asked on 7/31/2020 by Laurie

Can this switch be used with century motor B2980?
 Reply

A  Answered on 12/11/2020 by InyoPools Product Specialist Hector F.

Hi Laurie, yes this is the correct dual-speed toggle switch for the motor model B2980. Please be advised that it is currently a special order. 
 Reply


?     Asked on 4/2/2020 by Ty

Hi, I just had a B2975 installed & on day 2 there is leaking & lower speed is not working. I had a B975 so is the B2975 the correct choice? I also wanted the energy star rebate & am not seeing this either. The low switch in the timer panel also suddenly becomes stuck. The pool suction cleaner (sand shark) now only works when BOTH low & high switches on my timer box are turned on to “manual”. They suggested now buying a hi low switch & new timer box, etc. Do I even need a hi low switch?

 Reply

A  Answered on 11/11/2020 by InyoPools Product Specialist Megan C.

The Century 1.0 HP Round Flange 56J Dual Speed Full Rate Motor - B2975 is the same as the B975 Motor. If the pump is leaking it will create an air leak. If your controller is set up for operating high and low speeds the manual toggle Toggle Switch and Canopy Kit for 56Y 2-Speed - 2512558-001 is not required, however, you can use it if preferred. The pump in you images confirms a private labeled pump that uses the same seals as the Super II by Hayward. The Tune-Up Kit Hayward Super II - GOKIT2 or GOKIT2SALT for salt pools. Please see How to Identify and Correct Air Leaks http://www.inyopools.com/HowToPage/how_to_identify_and_correct_air_leaks.aspx 
 Reply


?     Asked on 12/5/2019 by truman

is the toggle switch on 2512558-001 available separately?
 Reply

A  Answered on 12/6/2019 by InyoPools Product Specialist Lennox H.

Hi, Truman. You can use the Toggle Switch 2-Speed - 815-4011 as a replacement. 
 Reply


?     Asked on 6/12/2019 by Austin

Can you use this with a B2981 motor? If so, could you provide wiring instructions for this switch kit to the B2981?
 Reply

A  Answered on 6/12/2019 by InyoPools Product Specialist Matt S.

Hello - yes this switch is compatible with the B2981 dual speed pump motor. We have an instructional guide on its installation listed here: How to Wire the 2512558-001 Switch to 230v Century 56Y 2-Speed Motors
 Reply

  • Commented on 6/12/2019 by Product Owner

    Thank you for your reply. The wiring instructions you linked are for 230V, are they the same for the B2981 since it is 115V?
     Reply

    • Commented on 6/13/2019 by InyoPools Product Specialist Matt S.

      The wiring should be similar, but not exact. We do not have a guide on the 115-volt version, but the switch does come with a wiring guide for installation.
       Reply


?     Asked on 8/20/2018 by

Can I purchase just the toggle switch without the canopy kit ? Or give me apart # that would work I need to mount away from poll motor anyway cause of access to motor
 Reply

A  Answered on 8/21/2018 by InyoPools Product Specialist Lennox H.

Hi. Unfortunately, the toggle switch is not sold as a separate part. 
 Reply


?     Asked on 7/12/2018 by Herman

How do I know if I have a controller, or need the toggle switch?
 Reply

A  Answered on 7/12/2018 by InyoPools Product Specialist Lennox H.

Hi, Herman. If you have a controller, you don't need a toggle switch and vice versa. You can look at the motor to confirm if you have a toggle switch installed. 
 Reply


?     Asked on 7/11/2018 by roger oschman

If ao smith part # 2512558-001 is not available, which switch do I use?
 Reply

A  Answered on 7/11/2018 by InyoPools Product Specialist Lennox H.

Hi, Roger. These are temporary out of stock.  You can use the Pool Timer Dual Speed Pump Timer - T106R which is an automatic low speed timer. 
 Reply


?     Asked on 6/5/2018 by Gary

Do I need this toggle switch as my controller switches the pump motor from high to low automaticly.
 Reply

A  Answered on 6/5/2018 by InyoPools Product Specialist Lennox H.

Hi. Gary. You will NOT need a toggle switch since you already have a controller. 
 Reply


?     Asked on 5/21/2018 by steve

will this fit on a sta rite model c48m2a2481?
 Reply

A  Answered on 5/22/2018 by InyoPools Product Specialist Lennox H.

Hi, Steve. Unfortunately, I was not able to confirm that this Toggle Switch and Canopy Kit will fit model # C48M2A2481. 
 Reply


?     Asked on 1/23/2018 by Clement

Hi, Will this work on the Centurion B2982 motor? Thanks.
 Reply

A  Answered on 1/24/2018 by InyoPools Product Specialist Lennox H.

Hi, Clement. Yes, this Toggle Switch and Canopy Kit - 2512558-001 will work with the B2982 dual speed motor.
 Reply


?     Asked on 1/23/2018 by Clement

HI, Can you work with Pentair 355010S motor? Thanks.
 Reply

A  Answered on 1/23/2018 by InyoPools Product Specialist Lennox H.

Hi, Clement. This Toggle Switch will not work with the 355010S motor. 
 Reply


?     Asked on 9/4/2017 by Larry

Can this work with a 56J frame? I need to replace the single speed motor on my Hayward SP2615x20 pump. As I read the reviews on the 2 speed units, they make sense, but seem like I would only use the higher speed at opening and backwashing - so adding another timer t my intermatic mechanical timer sounds like a waste of time and money. thx
 Reply

A  Answered on 9/4/2017 by InyoPools Product Specialist Lennox H.

Hi, Larry. This Dual Speed Canopy Toggle Switch will not fit a 56J motor. You can use either Part # 1011431-001 or 17590450 depending on the body style 56J motor you have. 
 Reply


Top

Review Summary

 (Average 4.67  out of 5 stars)
3 Rating
5 star:
 
(2)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews