By Aladdin



Part # GOKIT42

Alternate Part #'s 90-249-3042, AEQGOKIT42, ALDGO-KIT42, APCK1038

Product Description

Tune up kit for Hayward SP410X Slide Valve. Includes all of the essential replacement parts needed to service the most common valve repair applications are packaged together as one complete kit.

This Tune Up Kit Works on These Valves:

  • Hayward SP410X Slide Valve

Tune Up Kit Includes:

  • Bonnet O-Ring
  • Shaft O-Ring
  • Large Piston O-Ring
  • Small Piston O-Rin
  • 2 - Bulkhead O-Ring
  • Lubricant

For More Pool Pump Motors


?     Asked on 10/15/2014by Guest

My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.

?     Asked on 6/24/2015by Mike Dealy

My pool is getting diatomaceous earth fed back into the pool on the water return. I have checked the filter elements and they seem OK. i have a new manifold as the old repaired one finally gave way. Is it possible the slide valve is faulty and allowing DE to get into the return water?

A  Answered on 6/24/2015 by InyoPools Product Specialist Hector F.

Yes it is possible that the slide valve o rings are bad and causing this. Also be sure that all o rings withing the filter itself are in good condition and lubed.

?     Asked on 1/20/2016by Ravie Rameshwar

My push pull valve for a Hayward is leaking water from the top of the valve. In other words water is coming up where the push valve is located. Do I need to replace the entire push pull valve or just buy the tune up kit?

A  Answered on 1/20/2016 by InyoPools Product Specialist Megan C.

Hello, Ravie. I would suggest to disassemble the Hayward Slide Valve 2" SP410X and inspect all the pieces. Depending on what is damaged you may purchase just the one part, the GOKIT42, or the entire valve (If the damaged part is not available). In the event one O-Ring is damaged, I would recommend purchasing the kit and replacing all items the first time.

?     Asked on 8/13/2016by janet

My valve does not appear to close after backwash..In lock position water is still seeping out of the backwash.quick clean hose. It is ok to just unlock top ring and open this up to see what is wrong?

A  Answered on 8/21/2016 by InyoPools Product Specialist Lennox H.

Hi Janet, Based on what you're describing, replacing the o-rings within the valve will resolve your problem. This kit will include all that you will need if you have the Hayward SP410X Slide Valve.

?     Asked on 8/2/2017by Inyo Visitor

where is the part number on the hayward slip valve?

A  Answered on 8/2/2017 by InyoPools Product Specialist Alex V.

Hello, The valve model number is typically on the label on top of the valve. 


Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
4 star:
3 star:
2 star:
1 star: