$46.57

Qty:

Details

Top

Model # NA200

Alternate Part #'s BS112X25, ORQVH1225, PSL-40-8225, VH1225

Product Description

This commercial-grade 1 1/2" vac hose features full flow, smooth inside walls, and an extra heavy duty outer construction that resists concrete scuffs and tears. The swivel cuff eliminates the aggravating kinks.

Frequently Bought with Pool Hose

Pool Vac Hose Reel

Flexible Vac Head for Concrete or Fiberglass Pools

Vac Head for Vinyl Liner Pools

Product Specifications

Length:
25 ft.
Hose Size:
1.5"
Type:
Vacuum
Top

?     Asked on 7/6/2015by Judy

I have a polaris 360 and the hose has several holes in it and I would like to know if your product is compatible. Thank you
 Reply

A  Answered on 7/9/2015 by InyoPools Product Specialist Lennox H.

Hi Judy, The Deluxe In-Ground Vac Hose 1 1/2 inch / 25 foot will not work with the Polaris 360. The correct hose that is needed will be the Polaris 6' Cuffless Hose (9-100-3102).
 Reply


?     Asked on 3/22/2016by Wendell Sandlin

My 1-1/2" vaccum hose is about 10 feet short to to reach the other end of my pool.. Can this size hose be purchased by the foot or Is there a smaller hose less than 25" length available and a coupling to connect the two together?
 Reply

A  Answered on 3/23/2016 by InyoPools Product Specialist Lennox H.

Hi Wendell, These hose are not sold by feet and 25' is the shortest length of hose we carry. You will have use the Hose Connector (AXV092) to connect the two section of hose.
 Reply


?     Asked on 12/6/2018by Daniel

I have a fairly small pool and only need a 15' hose. Can this hose be cut down to size?
 Reply

A  Answered on 12/6/2018 by InyoPools Product Specialist Lennox H.

Hi, Daniel. This hose can be cut to a shorter length, you will also need to repair the cut end with the Hose Cuff - 1-1/2" - 211
 Reply


?     Asked on 4/28/2021by CMM

Is the cuff soft/pliable enough to securely slide over and engage the connector at the skimmer and at the vacuum end as well. I am asking because I recently purchased a hose and the cuffs are made of an inflexible plastic- that doesn't slide over the connectors at either end.
 Reply

A  Answered on 4/28/2021 by InyoPools Product Specialist Craig C.

Hello.  They should be flexible enough.   Have you tried warming your current hose cuffs in the sun to make them more pliable?  This can be an effective means to soften hard plastic and may allow them to slide more easily over the vacuum and skimmer connections.  Once completed you may not have to repeat this procedure.
 Reply

  • Commented on 4/28/2021 by Product Owner

    Thank you for the advice. I will give it a try.
     Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

knife

Needed a Shorter Hose

Written on 12/21/2018 by Guest

Ordered this one, cut it to size and installed the extra hose cuff. It works great... but, the 1-1/2" is apparently the I.D. and this is not stated anywhere in the online info, so it did not fit my 1-1/2" suction fitting in the pool. Fortunately, a short piece of PVC sink drain made the perfect adapter and I was back in business.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
 
(2)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews