Model # PKIT
T-CELL Plumbing Kit (Includes Unions and Flow Switch)
I only need the unions - I have the t cell / flow switch. Any idea where I can find the unions only? Thank you
Reply
No flow staying lit continuously.
Reply
Nine times out of ten this is a bad Aquarite flow switch. You may check to see if the cable to the flow switch has been nicked or chewed by an animal.
Reply
Hi, Could you tell what part of the system tells what the salt level is?
Reply
Hi, Rodney. The Cell relays the salinity and temperature reading back to the controller.
Reply
just uncovered the pool turned on pump salt water pool no flow light is on.i am not generating I want to know if no flow light stays on until I generate.
Reply
Hi, Randy. The No Flow light will stay on until water flow engages the flow switch. As long as the system thinks water is not flowing, you will not generate any chlorine. If you're sure that the system is getting at least 15 GPM, you may want to check the connection at the controller or your flow switch may be bad.
Reply
Is control panel for HO and RJ the same
Reply
Hi, Kelly. The AquaTrol HP and RJ use different Control Panels.
Reply
