Model # SP10841
By Hayward Pool Products
Model # SP10841
Alternate Part #'s HAYSP10841
Hayward 1084 Series Pool Skimmer for Vinyl/Fiberglass In-Ground Pools
The Hayward Auto-Skim Series is molded of rugged, non-corrosive ABS and has no joint below water level. The Auto-Skim feature a cover collar allowing 1 1/2" vertical adjustment and a snap-in-weir that automatically adjusts to 4 1/2" variation in water level. An optional float/by-pass valve is available. Skimmer includes standard and extra long 1-1/4" screws. The auto-Skim can be used in either Residential or Commercial applications. Add an optional float valve and equalizer with a NSF approved cover to any Auto-Skim with a square cover to accommodate commercial requirements.
what is the exact length from the top to the bottom? also, is the top depth deep enough for pavers?
Are you able to let me know what the dimensions are for the skimmer faceplate? I am replacing an old skimmer that they don't make anymore and I need to make sure the size of the opening is close
What are the dimensions of the opening to the pool?
What is the thread size for the hub in the bottom of skimmer?
Hi Andy, The outside dimensions are 10-3/4" X 8-9-16" the inside dimension are 7-5/8" X 5-5/8". The port is 1-1/2" FPT.
The optional float by pass valve, what is it and how much does it cost?
The optional float / by-pass valve provides a main-drain thru skimmer system plus an automatic safety by-pass for low water conditions. You may purchase the float valve assembly through this link http://www.inyopools.com/Products/07501352017468.htm