Wheel Tread, Blue Met - Optional (2 pk) - PVXS16PK2-234



Part # PVXS16PK2-234

By Hayward Pool Products



Part # PVXS16PK2-234

Alternate Part #'s PVXS16PK2234

Product Description

Wheel Tread, Blue Met – Optional (2 pk)


?     Asked on 6/11/2021 by chiller

My aquanaut 250 has climbed walls very well for over a year, but no longer. Treads don't appear worn down, still 1/2" of tread, but could they be worn ? How to tell ?

A  Answered on 6/11/2021 by InyoPools Product Specialist Craig C.

Hello Chiller.  The AquaNaut 250 tires have wear marks located in several places around the circumference of the tire (small bumps on the outside of the tire fingers)  Once tire wear reaches these marks it is time to replace the tire.  A diagnostic tool to determine if the filter is the cause of the slow down in cleaner performance: remove the filter element from the cartridge filter, replace the top lid and turn the pump on. If the cleaner climbs the wall again, the filter element needs cleaning or replacement.    If you have a DE filter, place the Multiport Valve in the re-circulate (or boost) position and observe the cleaner.  If it climbs the wall, then the DE Filter needs a backwash or entire breakdown and clean.

?     Asked on 3/22/2019 by Karmen

Hi. Will this part replace my Hayward Phoenix pool cleaner wheels? I thought the part number for my particular cleaner was Pvx075pk2-207, I cannot sorce this part. ?. Thanks


A  Answered on 3/22/2019 by InyoPools Product Specialist Lennox H.

Hi, Karmen. This Wheel Tread - PVXS16PK2-234 will fit The Phoenix cleaner. 


Est. Repair Time

Less than 1 hr

Tools Needed


1     0

Would not climb wall and would sometimes sit in place

Written on 5/16/2019 by Guest

Remove old tire tread and put new on. Easy!!! No tools needed.

Were these instructions helpful? 


Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
4 star:
3 star:
2 star:
1 star: