Model # PF1102T
Alternate Part #'s INT-30-741, INTPF1102T
Single Circuit Freeze Protections Controls
These Freeze Protection Controls are designed to protect the pool and spa equipment and plumbing against freeze damage. They turn ON the pump and the heater when the outdoor temperature drops below the temperature set by the user adjustable thermostat. Models without timer connect to a timing or switching device and together, they control operation of the equipment as well as protect it against freeze damage. Models with timer provide both automation and protection for the equipment.
Applications:
• Filter Pumps
• Filter Pump/Booster Pump Combinations
• Waterfalls
• Water Features
** PLEASE NOTE: If ordered, this mechanism may come with a mechanical timer, not a digital timer as pictured above. Intermatic has changed back to mechanical timer for these freeze protect mechanisms. Inyo Pools does not guarantee which timer type will be shipped. **
Product Specs
Accessories: 156PB10398A Plastic Tripper
Click here for more Intermatic Timers
Can this timmer be used with a variable flow pump?
Reply
Hello Ko, it will depend on the pump. Most VS pumps would already have a freeze protection mode built it. Please give us a call with the model number and we can help further.
Reply
Looking to replace the timer on my PF1102T unit with a digital timer, please confirm the kit I need (this unit has freeze prevention capability)
Reply
Hi John, Intermatic stated that there is not a digital timer that will work work with this unit.
Reply
I have the pf1102t timer on my pool pump it is less then 9 months old and it gains over two hours every day. how can I get a warr replacement.
Reply
Hi Paul, You will have to contact Intermatic at 815-675-7000 or submit a warranty claim through their website Intermatic.com.
Reply
does this timer have a manual over ride switch
Reply
Hi, The Intermatic Freeze Protect Timer 240V (PF1102T) does have a knob that can manually turn the filter pump on/off as stated in the PF1100 Series Operating Instructions.
Reply
How do I clear unwanted timer settings...Model PF1102T?
Reply
I am seeking a replacement thermostat only for this model, what is the part #?
Reply
The replacement thermostat is the 178T24 which you may view or purchase here http://www.inyopools.com/Products/02400001004524.htm
Reply
I currently have a PF1102T installed, but it needs to be replaced. I'm confused about which specific piece of pool equipment I need to look at to determine whether I can use the PF1103T instead. What confuses me is that while both the 1102 and the 1103 say they can be used for 120/240 v, and while I think I understand having to wire the neutral if I get the 1103, I don't understand the part of the 1103 instructions which say "Both models are designed to operate either on 120 volt or 240 volt, 60
Reply
We spoke with our Intermatic sales rep. and he stated that the 1103 model is designed to accomodate 4 wires - 1 Neutral, 2 Hots & 1 Ground and the 1102 is designed to accomodate 3 wires - 2 Hots & 1 Ground. Intermatic stated that you should be able to look at the wires going to your pump or the wires going to your breakers to determin if you have 3 or 4 wires. Thanks!
Reply
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, wire stripper.
Turn off power, remove cover to access wires, take picture with cell phone to show correct connections, remove wire nuts, remove mounting screws to remove box. do these steps in reverse, turn power back on, set timer.
The Most Helpful Review
2 0
(4 out of 5 stars) easy to install
Reviewed By: Rod R from Ennis, Texas ()
Pros: Easy to install
Cons: Only two on/off settings
The electronic timer was better because you could set it to come on up to five times a day.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Freeze protected timer Intermatic
Reviewed By: Inyo Customer ()
I have installed hundreds of these in pools they always work excellent and have very few issues
Was this review helpful to you?
(3 out of 5 stars)
Reviewed By: Inyo Customer ()
timer quit working after a few months
Was this review helpful to you?
(5 out of 5 stars) Great all around Timer and Freeze Protector
Reviewed By: Joe N. from Carthage, TX ()
Pros: Everything uutstanding.
Cons: Absolutely no cons.
Great Customer Service Department. They stayed on top of the problem and performed great communications
Was this review helpful to you?
(4 out of 5 stars) Good Timer
Reviewed By: Rod R from Palmer, TX ()
Pros: Easy to intall, works fine
Cons: Not a digital clock as shown
The timer was easy to install and works fine. I just wish it was a digital clock like I had previously.
Was this review helpful to you?
(5 out of 5 stars) Excellent Freeze Protection Timer
Reviewed By: Dudley from Griffin, Georgia ()
Pros: Many options for time setting; freeze protection
This timer is a great addition to my pool pump setup. I never have to worry when the temp drops below freezing, and the time settings are easy and effective.
Was this review helpful to you?