PER THE MANUFACTURER: THIS ITEM IS NOT AVAILABLE FOR SALE ONLINE
By Pentair Pool Products
Model # 77118100
Providing big lighting performance for smaller pools and spas
The AquaLight ® uses halogen quartz bulbs and designed for installation in small plastic or stainless steel Pentair niches. The light shell is high-quality stainless steel and the lens is Prismatic tempered glass.
Features:
Would this lamp fixture be the correct size for my old spa fixture and where can I confirm the lamps dimensions?
I have attached images below of what I need to replace.
Yes, this Pentair AquaLight will replace your current Pentair SpaBrite. Before purchasing the new fixture, I suggest confirming the correct voltage (120 or 12 V); and the run of cable need to reach the power source and still have some leftover for slack during servicing.
Reply
Hello,
Can you tell me if this lamp is in stock and how many you have, I may be in need of multiple units.
And want to confirm these lamps are factory fresh delivered in unopened boxes.
Thanks,
Scott
Reply
Hello Scott, to answer your question. yes we do have them in stock and have around 20 available. They are all new and unused.
Reply
Sorry..I am a bit clueless with electrics. My spa light is tripping the power and I need to replace it. It looks the same as this one. There is no label on the lamp casing to tell me the voltage...however, the bulb says 120v. 100w. Does this mean that this is the new lamp I should buy?
Reply
Hi, Ronald. If the bulb is 120 volts, then so will the fixture, so you can use this fixture as a replacement.
Reply
Less than 1 hr
Screwdriver, strong tape
Unit arrives sealed and ready to go. Remove the box wires for the old light, attach a wire to the end, tape it well so it won't come out when pulling it through. Unscrew the single screw in the housing of the light and pull the conduit out until the feeder wire comes through.
Attach the new wire to the feeder and pull the new conduit from the spa to the junction box. Cut the wire leaving enough to remove the light in the spa if a bulb ever needs to be changed (maybe 2 feet). Single screw the light back into the housing in the spa...done! 20 minutes!
