SuperFlo 1 HP Single Speed Pump Full Rate EC-348190

THIS PRODUCT IS OUT OF STOCK FOR THE SEASON

Part # 340039

By Pentair Pool Products

  5 Average  

Details

Top

Part # 340039

Warranty Ecommerce (EC) products: Products purchased from an Authorized Pentair Online Reseller (products beginning with EC-) receive a one (1) year (parts only) warranty from the date of purchase. The exceptions are: IntelliChlor cells and IntelliFlo SVRS pumps which receive a two (2) year warranty. EC products are not eligible for the bundled three (3) year extended warranty.

Manufacturer Code EC-348190

Alternate Part #'s SF-N1-1-1/2A, EC348190

Product Description

Inyo Recommended Pumps

The SuperFlo™ Pump is specifically designed to be the best available product for a variety of inground pool applications. SuperFlo features thick walled body parts, a heavy-duty 56 square flange motor along with highly engineered hydraulics. This pump also comes equipped with a silent running capability and small footprint allowing it to easily drop into a compact equipment pad. The SuperFlo pump is the result of more than 40 years of innovative hydraulic engineering. All in all, it will provide your pool system the ability to move more water more efficiently for lower operating cost and quieter operation. Plus, by performing with less effort, there is simply less wear and tear which, means longer life for a higher return on your pump investment.

Features:

  • Extremely quiet operation.
  • Unionized fittings (1.5" internal slip and 2" external slip).
  • Cam and Ram lid locks in place with a quarter-turn.
  • See-through lid permits easy inspection of strainer basket.
  • Heavy-duty, high service factor 56 square flange motor.
  • Integral volute and pot reduce hydraulic noise.
  • SuperFlo is a direct replacement for the Hayward Super Pump.

    Product Specs:
  • Horsepower- 1 HP
  • Voltage- 115/230V (60Hz)
  • Single-phase- Single-speed

Dimensions:

Super Flo Dimensions

Product Specifications

HP:
1 HP
Speed:
Single
Volts:
115/208-230 V
Amps:
16.0/7.8-8.0
Union Connectors:
1.5 - 2 in.
Port Size:
1.5 in.
Service Factor:
1.5
Top

?     Asked on 2/13/2021 by Julie

How do I empty water from the pool that is close to overflowing from all our rain?
 Reply

A  Answered on 2/15/2021 by InyoPools Product Specialist Hector F.

Hi Julie, here is a guide that we put together called "HELP! My Swimming Pool Is Overflowing" that goes over some ways that you can drain your swimming pool that should assist. 
 Reply


?     Asked on 7/7/2020 by JOSEPH KARP

On model 340039, how to remove cover from electrical connection.
 Reply

A  Answered on 12/14/2020 by InyoPools Product Specialist Hector F.

Hi Joseph, there is a small plate cover at the rear of the motor which can be removed by using a small nut driver. 
 Reply


?     Asked on 6/13/2020 by

I just need a 340039 pump my motor is fine it is a 1.5 hp .can I buy just a pump?
 Reply

A  Answered on 11/23/2020 by InyoPools Product Specialist Hector F.

Hello, the correct single speed replacement motor for the original Superflo model 340039 pool pump is B854. You will also need a Pentair Superflo seal kit when you replace your motor. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
 Reply


?     Asked on 5/4/2020 by Joe

Does the Pentair Superflo 340039 have its own power cord? The original model had its own dedicated plug.
 Reply

A  Answered on 5/4/2020 by InyoPools Product Specialist Patrick P.

Hi Joe, No this Superflo 340039 does not come with its own power cord. You would remove the power cord from your current pump and install it on this pump which is an easy swap out.
 Reply

  • Commented on 5/4/2020 by Product Owner

    can you provide the link for the power plug part on your website. I cannot find it to purchase it.
     Reply

    • Commented on 5/4/2020 by InyoPools Product Specialist Patrick P.

      Hi Joe, Here is a link to the 3 Prong Plug and Cord please note that the cord can only be used for 115V wiring and not 240V. Also note that for some applications you may be using a 115V Twist Lock Plug The difference between the two is that the first cord has a standard 3 prong plug and the second is a twist lock.
       Reply


?     Asked on 4/21/2020 by Louis Bontkowski

Will this pump work with 1 1/2ā€ and 2ā€ lines? Iā€™m not sure what size my lines are.

 Reply

A  Answered on 4/21/2020 by InyoPools Product Specialist Lennox H.

Hi, Louis. Yes, this pump can be used for either plumbing size. 
 Reply


?     Asked on 4/16/2020 by Louis Bontkowski

I am replacing an old Pinnacle High Flo pump Centurion switchless motor for PAC-Fab. This pump was installed about 1998. 1 1/2 HP, 1.10 SF, Volts 230/115, Amps SF 8.0/16.0. Will the Pentair Superflo 1 1/2 HP High Performance pump replace this? What would you recommend?

 Reply

A  Answered on 4/16/2020 by InyoPools Product Specialist Patrick P.

Hi Lou, Yes the Super Flo 340039 would be a great replacement for your old Pinnacle Pump. The plumbing ports are not in the exact some location so you may have a little bit of re-plumbing.
 Reply

  • Commented on 4/16/2020 by Product Owner

    Is there something you would recommend that the plumbing ports are in the same place?
     Reply

    • Commented on 4/16/2020 by InyoPools Product Specialist Patrick P.

      Hi Louis, Unfortunately, there is not a pump that has the plumbing ports in the exact same location. You could just replace the motor and keep your old Pinnacle housing. If you wanted to go this route you would need this 1.5 HP Pinnacle Replacement Motor and this Pentair Pinnacle Seal Kit
       Reply

      • Commented on 4/16/2020 by Product Owner

        Ok. That won’t do me any good. The problem I have is leaking. The plastic ahead of the motor wore out and created a hole. I have siliconed but kept leaking last year. Are the ports far off?
         Reply

        • Commented on 4/16/2020 by InyoPools Product Specialist Patrick P.

          Hi Louis, I don't have the port locations for the Pinnacle but I have attached the Port locations for the Super Flo which can find attached. I don't believe they should be too far off.

           Reply

          • Commented on 4/16/2020 by Product Owner

            Thank you for your help
             Reply

            • Commented on 4/16/2020 by InyoPools Product Specialist Patrick P.

              Thanks Louis!
               Reply

              • Commented on 4/17/2020 by Product Owner

                One more question. With what I have there, is there another pump you recommend other than the Pentair SuperFlo or would that be my best bet?
                 Reply

                • Commented on 4/18/2020 by InyoPools Product Specialist Patrick P.

                  Based on the price point I really like the Waterway 1.5 HP SMF Pump and the quality is really good. This Pentair SuperFlo would also be a good option as well.
                   Reply


?     Asked on 7/30/2019 by

Is the unit full or up rated?
 Reply

A  Answered on 7/30/2019 by InyoPools Product Specialist Lennox H.

Hi. This pump motor is up rated.
 Reply


?     Asked on 6/10/2019 by chris

My pool is roughly 10-12 thousand gallons, My pump just went, 3rd pump in 8 years. they all were a hayward super pump 1&1/2 HP 115/230 im done with Haywood? what would u recommend?
 Reply

A  Answered on 6/10/2019 by InyoPools Product Specialist Lennox H.

Hi, Chris. You can use the Pureline Prime 1.5 HP - PL2602, or this SuperFlo 1.5 HP - 340039 are suitable replacements. 
 Reply


?     Asked on 6/3/2018 by Jim

My pool which includes a spill over spa holds about 15,000 gallons. The current pool pump is a Sta Rite Dyna Glass MPRA6F-148 ( 1 1/2 Hp motor ) single speed pump. The tank and trap body has a crack in it. Will the Pentair 340039 superflo high performance single speed pump be a good replacement option for my pool.
 Reply

A  Answered on 6/12/2018 by InyoPools Product Specialist Lennox H.

Hi, Jim. The Superflo Pump has a lower performing pump than the MPRA6F-148L pump. I would recommend the MPEA6F-206L. If you want to use the Superflo Pump, you will need the 2 HP - 340040
 Reply


?     Asked on 9/13/2017 by Samantha

Does this pump (Pentair SuperFlo 1.5hp) come with all the O-rings etc I will need when installing it? I am replacing an old version of the same pump.
 Reply

A  Answered on 9/13/2017 by InyoPools Product Specialist Patrick P.

Hi Samantha, Yes the Pentair SuperFlo will come will all O-rings needed for installation. You may need some basic plumbing fittings and glue based on your plumbing set up and those items can be picked up at local hardware store.
 Reply


?     Asked on 3/26/2017 by bill

I am replacing Pentair Superflow 1774528 with 1 1/2 HP pump .It looks like #340039 would be a good replacement pump. Do you have other suggestions?
 Reply

A  Answered on 3/28/2017 by InyoPools Product Specialist Scott W.

Are you looking to replacement the complete pump or just the motor?
 Reply


?     Asked on 1/3/2017 by Dennis

I have a pinnacle/Pentair pump (tag info) PF11-P1-1 1-02-F03 /34-2351 1-1/2hp 1 ph 60hz 115/230 Is your Pureline 1-1/2hp a drop in/do the inlet&disch ports still line up? will the replacement come with the quick disconnect unions? Thank you.
 Reply

A  Answered on 1/3/2017 by InyoPools Product Specialist Scott W.

Which pureline pump are you looking at?
 Reply


?     Asked on 9/20/2015 by gary

what product would you recommend to replace pac fab with ao smith century 2 speed motor rated at 1.65 hp-- 30000 gal pool
 Reply

A  Answered on 9/25/2015 by InyoPools Product Specialist Lennox H.

Hi Gary, The Whisperflo Dual Speed Full Rate 1 HP Pump (011486) would be the recommended replacement.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Pliers, Adjustable Wrench

Current pump was not working anymore.

Written on 3/12/2018 by Guest

Easy to install.
First of all, take pictures of current pump and all connections (handy to reference during installation of new one).
Second, shut off power at the breaker (double check for sure!)
Remove all connections to current pump, move from site
Place current pump on same site as old pump, Make sure pump is level (took me a few tries to get this right so it didn't leak/rattle)
Make all connections
Turn power back on, turn pump on

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
7 Rating
5 star:
 
(7)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews