$1,644.99
By S.R. Smith
Model # 682095961
The Cantilever stand is a high quality board stand that offers users great diving fun. Designed for residential in-ground pools, the Cantilever is available with both 6-ft. and 8-ft. board lengths in a variety of colors to match the latest in backyard de'cor. Cantilever stands are manufactured using high-quality steel for strength and are powder-coated to protect against corrosion. The stand can be combined with either of S.R. Smith's popular diving boards, the Frontier III or Glas-Hide acrylic diving board.
Frontier III Board: Intended for moderate to heavy use on residential pools. One wide laminated, wood core runner extends along the entire length of the board. Features a durable acrylic outer surface that will not scratch or fade — providing many years of recreational enjoyment.
Diving Board available in the following colors:
Diving Board Dimensions:
Jig Dimensions:
Click here for more Diving Boards
What size diving board can I use on my pool?
Reply
Page 2 & 3 of this document http://www.inyopools.com/owners_manual/SRSmith_Cat_standard.pdf will give you the minimum residential pool requirements for all of our SR Smith Diving Boards.
Reply
We are considering installing a diving board on our existing concrete deck. Given we have an auto safety cover; we are limited to which boards can be installed properly and extend over the cover without interfering. This board and stand option do meet my requirements, according to what I see in the specification (Frontier III with Cantilever). Is their special mounting hardware for installing on an existing concrete deck? If so do you have the hardware available?
Reply
If you have an existing deck you would need to purchase one of our diving board Epoxy Kits which includes epoxy resin, hardener and mounting bolts. The epoxy kit works as follows: drill holes in your deck to match the holes on the base of the diving board. After drilling the holes you would apply the epoxy to your bolts and place the bolts into the holes you have drilled. You will now have the appropriate bolts sticking up out of your deck and the new base would slide over the bolts, you would then use the hardware which comes with the base to attach the base to the bolts.
Reply