Model # SV150T6SI
By Next Step Products
Model # SV150T6SI
Alternate Part #'s SV150T6-SI
NEW Wireless Illuminator eliminates data cable and master-slave units. The illuminator houses the lamp which is the light source for all fiber optic lighting. Since fiber optic strands do not generate but only carry light, all fiber optic lighting requires an illuminator. The Super Vision 6-Color Illuminator Synchronous is designed to be used with other synchronous units to synchronize fiber optic lighting installations that require multiple light sources. It can also be used as a stand-alone illuminator. If you need only one illuminator but think you might want to add a second light source for future fiber optic lighting, it is a good idea to purchase the synchronous model. This will give you more lighting options for future installations. Please note that a non-synchronous illuminator will not synchronize with a synchronous unit.
The 6-Color Illuminator Synchronous provides six different light colors: white, hot pink, peach, green, light blue and dark blue. With an internal color tempo control, you can control the amount of time spent on each color. It has a fiber optic strand capacity of 550 strands which can be upgraded to 756 strands with the purchase of an upgrade kit (sold separately). The illuminator is made of UV stabilized material that is water, corrosion and chemical resistant. Its taupe color blends easily with the environment.
150 watt Metal Halide Lamp
Easy lamp replacement
10,000 hour average lamp life
550 strand fiber capacity (upgradable to 756)
On/off, stop/start switches on all units
Color wheel with six different colors
Internal control for color wheel tempo
Mounting base included
Hard wire ready for external remote system
Wireless remote control can be added easily
2 year limited warranty (excluding lamp)
Dimensions: 9.5" x 9.5" x 20"
Weight: 21 lbs.
Power consumption : 200 watt max
Motor : 1 RPM motor
Ambient operating temperature:
-20 degrees F to 110 degrees F
-29 degrees C to 44 degrees C
UL listed for wet locations.
Click here for Super Vision Wireless Remote Control Kit
Click here for Super Vision Upgrade Kit
We are building a wall close to the pool and thinking of a waterfall. Where does everything go? Can the pool pump be used instead of a dedicated pump? How far can the illuminator be from the waterfall? How far from the wall to where the water hits the pool? In other words, how close does the waterfall have to be to the pool?
The illuminator and pump can be placed where your exisiting pool pump and filter is located. The further the distance away from your pool, the more more fiber and a higher HP pump you will need. We recommend purchasing an additional pump for a waterfall. If you use the same pump, the waterfall will take away from the existing water circulation and your pool will not be properly filtered. For the basics on how it all works, please visit our Fiber Optic Waterfall Guide: http://www.inyopools.com/fiber_optics_waterfalls.aspx
Can I use Super Vision Fiber optic cable with a Fiberstars illuminator?
Both companies' cable will work with either the Fiberstars or Super Vision illuminator. You will need to make sure that you have the proper perimeter track in your pool to accommodate the appropriate cable.