$313.99
Part # 40GA
Manufacturer Code 40-0001
Dimensions 3-1/2" x 2-3/4"
Alternate Part #'s SAV40-0001, SV400001
*Note: This item is currently available in very limited quantities and is subject to back order.
Metal halide replacement lamp used in the Super Vision SV150T, SV150T6 and SV150TMH fiber optic illuminators. (These illuminators also sold under the brand names Nexxus Lighting and Next Step Products.)
also with the 6004 illuminator if the bulb is burnt out will the unit still turn on.
Reply
will the bulb on the lifetime illuminator 6004 work on the svt150t
Reply
Unfortunately the bulb on the 6004 illuminator will not work on the svt150t and there is not a replacement we are aware of. You may want to consider replacing your SV150T tower with the Fiberstar 6004 Illuminator
Reply
Hi. I was wondering how many lumens does the 150w metal halide produce? I am trying to figure out if I can replace the entire system with LED but don't know the exact equivalent wattage. Thanks in advance!
Reply
Hello, We would recommend contacting the manufacturer with that question. You can reach them at 1-800-822-7933
Reply
I am looking for 40GA 40-0001 lamps. We have quite a few of the controllers that require these lamps. Is there a replacement. On the website it stated SV400001 and SAV40-0001. Do you have any of these in stock and if so how many. Thank you.
Reply
Hi, Shawn. This Replacement Lamp - 40-0001 is the correct replacement lamp which we do have available.
Reply
A question was asked about replacing the lamp with LED. Your answer was "Unfortunately you can replace with LED". Did you mean can't? I would also like to relamp with LED.
Reply
There is not an LED replacement for this lamp. Switching to LED lamps like the SaVi Melody lights is quite an undertaking. You would need to remove all fiber optic lighting and install new wiring and lamps.
Reply
If I have the old casing, can I just replace the bulb?
Is the old casing critical to the functioning of the new bulb?
Reply
Hello Sergio,depending on how long you've had your light and the condition its in, I would say the fan isn't functioning and your casing is rusty I would replace the whole light.
Reply
can you use an LED bulb instead of a metal halide if you remove the ballast and is the ballast part of the 40-0001 metal halide light
Reply
Hi Ralph, Unfortunately, you can replace this lamp with a LED bulb.
Reply
Need help. Purchased a new 40-ga bulb for sv150t illuminator. Installed it the other day. Bulb came on, fan didn't. Installed a new fan and now the bulb doesnt come on but the fan does. Any ideas.
Thanks,
Doug
Reply
Hi Doug, If the bulb is turned on without the fan cooling it, the bulb failure will result very quickly. This sounds like what happened.
Reply
The Most Helpful Review
2 0
(5 out of 5 stars) Replacement Lamp for Supervision Light Source
Reviewed By: Steve G. from Bloomfield Hills, MI ()
Ordered the bulb online, it was shipped to my house. I installed it and it worked just like the originl bulb. The price was half of what was typically listed other places. I am extremely satisfied.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Michael S. from Maricopa , AZ ()
Cons: very long wait for shipping (OUT OF STOCK)
Was this review helpful to you?
1 0
(3 out of 5 stars) Necessary Bulb. Works well but needs longer life
Reviewed By: Marc G. from Chicago, IL ()
Pros: High quality, high level of light
Cons: Cost
This bulb is necessary to operate the fiber optic lighting system. It works very well, but needs replacement quite often and it is the most expensive light bulb I've ever seen - more than $150! Because of the expense, would like to see a longer life bulb or at least one where the bulb could be sold separately from the housing to reduce the cost.
Was this review helpful to you?
0 1
(4 out of 5 stars) Replacement Lamp (40-0001)
Reviewed By: nandomtl from dollard des ormeaux, QC ()
Pros: a perfect fit, lowest price I could find.
Was this review helpful to you?