$373.99

Qty:

By Waterway


Details

Top

Part # 34208201A

Warranty 1 Year

Dimensions 16.5" L x 8.5" W x 6.5" D

Alternate Part #'s 3420820-1A, 34-270-3558, WW34208201A

Product Description

The Waterway Executive 48 pump is thermally protected to extend the life expectancy of the motor with a highly versatile wet end.

Spa Pump Features:

  • Executive wet end designed specifically for 48-frame motors
  • Large 6-1/2" diameter wet end for higher head pressure
  • 2" intake and discharge
  • Wet end can be rotated for easy installation
  • Thermally protected to extend life expectancy of motor
  • Dimensions (H x W x L): 8.34" x 8.13" x 15.72"
  • Available in 1 to 4.5Hp and in single or dual speed (SEE THE AVAILABLE STYLES TAB)

  • California Title 20 Compliant

 

Manufacturer Waterway
Pump Model Executive
Speed 2 Speed (2-Spd)
Motor Voltage 230v
Drain Plug Location 3,6,9 o`clock
Suction Style Center
Suction Connection Type Male Buttress Thread (mbt)
Suction Pipe Size 2"
Discharge Style Side
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Pipe Size 2"
Horsepower 2.0hp
Motor Frame 48 Frame Thru-Bolt
Motor Amperage/Wattage 8.4A/2.6A

Product Specifications

HP:
2.0 HP
Manufacturer:
Waterway
Pool / Spa Type:
Spa
Volts:
230 V
Speed:
Dual
Amps:
8.4/2.6
Frame:
48
Intake Port:
2 in.
Discharge Port:
2 in.
Pump Model:
Executive 48
Discharge Location:
Side
Top

?     Asked on 11/29/2016by enrique

impeller inside the pump is 2hp
 Reply

A  Answered on 11/29/2016 by InyoPools Product Specialist Scott W.

Yes, that 2HP pump is going to have a 2HP impeller. That is how every pump is. If it is a 2HP pump, all the parts on the pump are for a 2HP pump. That is why I was asking easier today why you have a 2HP impeller with a 1HP motor.
 Reply


?     Asked on 3/3/2018by Paul

I am looking for 2 replacement spa pump and motors for my Master Spa. Both motors have the same part and model numbers. Part #342021-0A, Model #PF2NCF. Any help you could provided is appreciated.
 Reply

A  Answered on 3/5/2018 by InyoPools Product Specialist Lennox H.

Hi, Paul. You can use either this Waterway EX 48 Pump - 34208201A or the AquaFlo XP2 Pump - 06120500-2040 as a replacement. 
 Reply


?     Asked on 4/8/2020by Glen

Can the wet end be clocked to the 7:30 position?
 Reply

A  Answered on 4/8/2020 by InyoPools Product Specialist Lennox H.

Hi, Glen. The wet end can be rotated, however, NOT at a 7:30 position. 
 Reply


?     Asked on 6/8/2020by CB

I have a Sundance Montego hot tub built in 1997 and the high speed pump has failed. One sticker on the pump says "Theramax Sundance Spas Model 06020191-1. There is a second label that says Magnetek Century Pool & Spa Motor 1081/1563 Pump duty and BN40 Part 7 -182688-02 HP. Do you have a pump to replace this one? Thanks, CB
 Reply

A  Answered on 6/9/2020 by InyoPools Product Specialist Lennox H.

Hi, CB. This Waterway Executive 48 Spa Pump - 2 HP is a suitable replacement.
 Reply

  • Commented on 6/9/2020 by Product Owner

    Thanks. Can the intake and discharge housing be turned to accommodate my current configuration? It is horizontal.
     Reply

    • Commented on 8/27/2020 by InyoPools Product Specialist Lennox H.

      CB, Yes, the wet end can be rotated. 
       Reply


?     Asked on 10/5/2020by Inyo Visitor

need executive 48 part no 3421021-0a86 if you could please help
 Reply

A  Answered on 10/23/2020 by InyoPools Product Specialist Joe S.

Hello, thank you for contacting INYO POOLS. Yes the 3421021-1A Waterway Executive Spa Pump 2-speed, 230V, 9.0 Amp 48 frame 5.6" diameter 2" SD/CS. Waterway Hot Tub Pump would fit your model and the following. 3421021-0A8QMR, 3421021-0A7GDY, PF2NCF, PF-2NCF, PF-25-2N22C4, 3421021-0A, 3421021-0A8QMR, 3421021-0AQMR
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)