By U.S. Seal Manufacturing
Part # 5270-24
Manufacturer Code BC-56
Dimensions 1-7/16" x 3-3/8"
Alternate Part #'s 15769815, 53-64MFD, BC-53M-250, BC56, 10000327001013, 35-125-1056
Capacitor, Start 53-64 Mfd 125v (bc-56)
I need to replace my the capacitor on my 1.5HP pool pump. Do you carry the capacitor I need?
Reply
Please note that capacitors store an electric charge and should be handled with the utmost caution and care. We do not encourage handling a capacitor without any type of safety measures in place and highly recommend contacting a professional service company for repair/replacement. For those that feel comfortable changing the capacitor here's >How to replace a pool pump capacitor. In order to match up the capacitor you will need more specifications on the capacitor. You will need to match the voltage, the MFD, whether or not the capacitor is a >run or >start type and the actual dimensions of the capacitor body.
Reply
My Polaris Booster pump does not start on its own now. I disconnected the motor from the pump and when I turn it on, it hums, I spin it manually and it goes. I shut if off and when I turn it on just before it stops spinning, it starts, but if it stops, it does not start. It is a 1081 Zodiac booster 3/4hp ABS625 230V with a run capacitor of 370V and 35 mfd.Should it have a start capacitor rather than a run cap? It runs without a run cap, when I manually spin it.
Reply
Hi, Steve. It appears that the manufacturer of the motor you have uses a Run Capacitor instead of a start capacitor. The symptoms are the same if a start or run capacitor fails.
Reply
what size start capacitor for 1 1/2 h p well pump
Reply
Hi Brian, we may not carry parts for a well pump however, could you send us a photo of your motor? Please take a close up shot of the motor label. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
