Part # 4600-1016
Manufacturer Code 190003
Alternate Part #'s 11373, 190003, 4600-1016, 4654-66, 788379672720, PAC-051-1646, PEN190003, 14-110-1526
Clamp Assembly - PT5000/Clean & Clear Plus/FNS Plus - 190003
Frequently Bought with this Clamp
I have a Pentair DE quad system. I believe it is a Finesse. The measurement length of my band is near 62". Do you have any in stock.
Reply
Our pool installed in June 1996 by blue Haven in Houston . The filter is a SuperStar-Clear C-4000
the clamp to hold top/bottom together has 2 barrel nuts/ springs. I was told by a local pool
Service co. That the clamp no longer available. My filter is the 4 cartridge 420 sqft.
Reply
Unfortunately, the DEX2400J Clamp Assembly is discontinued without a replacement. There are other items available shown here http://www.inyopools.com/pool_parts_hayward_super_star_clear_cartridge_filter.aspx The Hayward Swimclear Cartridge Filter 425 sqft - W3C4030 is the replacement filter to the Super Star-Clear C-4000.
Reply
Have a Pentair Filter Model# CCP420. Will this ring lock work on it?
Reply
You are correct, this Clamp Assembly - 190003 is the replacement for the Pentair Clean & Clear Plus Cartridge.
Reply
I have a "PacFab" CC240P. The parts diagram says the part number for the "clamp kt, tension control" is 178565. Is the a replacement for that part?
Reply
We have looked through all of our documentation and nothing is coming up for 178565, however this Clamp Assembly is the proper Clamp Assembly for the Pac Fab CC240P so this will be the proper replacement for your filter.
Reply
Yes this is the correct part.
Reply
I have an older Pentair FNS Plus 36 DE filter and the bolt on the clamp assembly is stripped. Is this the right clamp assembly for this filter?
Thanks!
Tony
Yes, MFG part number 190003 is the clamp assembly for the FNS 180007
Reply
190003 is the correct part number for your filter.
Reply
Yes, thatis the correct clamp assy for the FNS plus 36
Reply
Is this the clamp and assembly for the Pentair FNS 60?
Reply
what would be the reason to change the clamp? i have a problem trying to put the screw together on my old one?
Reply
Mostly homeowners replace these clamps due to corrosion or expansion over the years.
Reply
Does this item fit the CP520 filter housing? I've noticed the base is ever so slightly wider and the current clamp assemply won't grab the bolt due to the spring "nut" being too recessed now. Can this clamp secure the top chamber housing even though it is as old as the older bottom housing?
Reply
Yes, the Clamp Assembly, PT5000/Clean & Clear Plus (190003) is correct for the Clean & Clear Plus Filter 520 Sq Ft Filter - 160332 The tank/body o-ring may need to be replaced and/or applying Magic Lube O-ring Lubricant 1 Oz. Teflon - 630 helps with the ease of closing.
Reply
I have a purex triton seahorse FSH 300 and Im looking for a tension ring for the filter but can't seem to find a
match can you help me
Reply
Is the clamp assembly 190003 the correct replacement for a Pentair Clean and Clear Plus, CC420P, P/N 178557 Rev F, made in 2001? Also, there are three clamps shown in the pictures. Mine is the first listed. Are all three replacement clamps the same size?
Reply
Hi. This Clamp Assembly - 190003 will fit the CC420P filter. All the clamp are the same.
Reply
Is Clamp Assembly, PT5000/Clean & Clear Plus (190003) the correct assembly for a Pentair Clean & Clear Plus, Model # CCP320?
Reply
Yes this is the proper band clamp for the Pentair Clean & Clear Plus CCP320
Reply
I have a Purex triton 5000 Clamp Assembly I think bolt is stripped and the assembly has to be 20 old will this work and what are the measurements around?
Reply
Yes, I believe that is the correct clamp assembly, but I recommend giving Pentair a call, 800-831-7133, to confirm that.
Reply
is these clamp assembly is for model FNS 48 Pentair
Reply
The correct band assembly for the FNS 48 Pentair DE filter is the Band Assembly (195351).
Reply
I need a clamp assembly for
purex triton FNS PLUS
model # FNSP48
ser# 09 I ? Part #190029 REV. C
Reply
Hello Ed, The clap assembly can be found here. http://www.inyopools.com/Products/07501352014441.htm
Reply
The Most Helpful Review
2 1
(5 out of 5 stars) Pump Band
Reviewed By: David E. from Charleston, SC ()
Pros: Easy to access online, very fast delivery
Cons: After providing very detail info on my filter, I was given the wrong part number, not the end of the world but inconvenient because we couldn't use the pool on the holiday. But, there is the rest of
It is made of a very strong material but the unfortunate part is after spending several minutes with the online help, he gave me the wrong part number so I am waiting for my card to be credited back to reorder. This is a bad time of year to have your pool down with the temperatures hovering in the 90's. The part was fine, simply the wrong one
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Fir as expected
Reviewed By: ()
Fit as expected
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Jim D. ()
This must be used when replacing old bottom or top tank assemblies! Web site shows picture of old clamp and new clamp for some reason. Part # is same as old clamp, but they made changes and forgot to tell anyone
Was this review helpful to you?
1 0
(5 out of 5 stars) Good Quality
Reviewed By: Stephanie W. from Exeter, NH ()
Clamp is of good quality and arrived in a timely manner.
Was this review helpful to you?