Part # 4686-21
Manufacturer Code 27001-0061S
Dimensions 15-1/4" ID, 3/8"
Alternate Part #'s 27001-0061S, 270010061S, PEN27001-0061S, STA-051-2511, 17-102-1204
Cord Ring - 27001-0061S used on the following Sta-Rite filters:
Also used on several Aqua Tools filter models.
This ring goes between the top and bottom halves of the filter tank. Lubricant included.
Wanting to confirm this fits the Sta-Rite System 2 Filtration - Model PLM150
Hi Cynthia, yes this cord ring is compatible with the Sta-Rite model PLM series filters manufactured from 3/97 to current models. If you are not sure then you can either contact Pentair at 1-800-831-7133 with the serial number on the filter or advise us and we can confirm for you.
I have a Aquatools AT8230 filter.
I need a new O-Ring. My manual lists the Part # 27001-0060.
Do you know if this is a suitable replacement?
I have an Aqua Tool A8230 Pool What O ring would I need to replace the old one.Filter was bought in 2009
I have an Aqua Tool At 8230 Filter What part do I need that replaces the O Ring
Hi, Richard. We will need to know the age or manufactured date of your model. If you don't know that, you can measure the old ring.
How Can I tell which one I need? I dont see a manufacture date.
I bought my filter used years ago. How can I tell if it's pre or post 1997?
Good day. I spoke to a technician at Pentair ( who now ownes Sta-Rite ) and one of the older Sta-Rite techs and he said that the Pre 97 o-ring is thicker than the Post-97. His suggestion was to purchase the Post-97 and, if need be, just add extra lube to complete the seal. Unfortunately, there is no other difference in the tank configuration to tell the time period, other that the sticker with either the pump model or the serial number. Pentair would be able to then tell you the year of the filter tank. If you can find either of those, please give Pentair a call at 800-831-7133.
The cord ring I have is a little stretched out. Is there a way to shrink it a little? It's been fine until this year
James,No, unfortunately due to wear and tear, once an o-ring stretches out, you can't shrink it back to the original size.
How do I know this is the right size? Returnable?
Hi Tim, Yes this item is returnable. Your filter should have a label on the side and if it says PLM 100, 125, 150, 175, 200, 300 or PLD50 or PLD70 then this is the correct o-ring for you. The o-ring on this page was for these models of filters from 1997 to current, if your filter is before 1997 then you would require the 27001-0060S o-ring.
(5 out of 5 stars)
Reviewed By: Jeannie M. from Douglas, Georgia ()
Pros: excellent fit
I highly recommend this product to anyone seeking to stop air bubbles in their pool water. I didn't realize until I changed out my o-ring that I was loosing pressure in my filter pump. I could immediately see the circulation in my pool water. I've placed orders before with in-yo-pools before and have always received my products before expected arrival.