Pentair Filter Drain Assembly 3/4" - 154698

$27.53

IN STOCK

Part # 4600-4698

By Pentair Pool Products

  4.6 Average  

Details

Top

Part # 4600-4698

Manufacturer Code 154698

Dimensions 3" x 1"

Alternate Part #'s 15-4698, 154698, 31-110-1156, PAC0512851, PEN154698

Product Description

Drain Assembly 3/4" - 154698

Frequently Bought with this Drain Assembly

Drain Plug 4600-4699

Top

?     Asked on 5/31/2020by Margaret Poovey

Will this work for a Triton 2 filter
 Reply

A  Answered on 10/20/2020 by InyoPools Product Specialist Hector F.

Hi Margaret, yes this drain assembly is compatible with the Pentair Triton II series filter models manufactured after 3/1983. If you are not sure of the date of manufacturer you can provide the serial number to us and we can look into that or you can contact Pentair directly with that to confirm at 1-800-831-7133.  
 Reply


?     Asked on 4/15/2020by Tom

Is there a separate screen for this spigot drain assembly, or is it integral to the part? I have sand leaking when I remove the drain plug, and am wondering if the spigot was not properly re-installed when the sand was changed, or if it is bad or missing some sort of screen to stop the sand from flowing out the drain.
 Reply

A  Answered on 12/1/2020 by InyoPools Product Specialist Megan C.

The Drain Assembly 3/4" - 154698 uses a plug and o-ring that are not included. The part numbers are Drain Plug 1/4" - 154699 O-ring Od 11/16" (O-39) - 112 and Sand Drain Gasket (154713) you may view them in the schematic on this link http://www.inyopools.com/pool_parts_pac_fab_sand_dollar.aspx for keys 7,8,9, and 10. If one of the o-rings has failed you may experience the sand leaking out. 
 Reply


?     Asked on 5/29/2019by robert

is this available in 1 inch. For a Trton TR60
 Reply

A  Answered on 5/29/2019 by InyoPools Product Specialist Michelle B.

This will be the drain plug you will need. http://www.inyopools.com/Products/07501352023743.htm
 Reply


?     Asked on 5/28/2016by howard elandt

need to remove faulty drain plug but cannot get it out any ideas on how best to remove??
 Reply

A  Answered on 5/30/2016 by InyoPools Product Specialist Lennox H.

Hi Howard, This drain assembly simply unscrews from the tank. You may need to use a wrench to get a good grip.
 Reply


?     Asked on 4/27/2015by Joseph

What is the proper plug for this drain assembly? There are 3 options but I don't know which is correct.
 Reply

A  Answered on 4/28/2015 by InyoPools Product Specialist Lennox H.

Joseph, You'll need to know measure the current one that you have to find out which one you need.
 Reply


Top

Review Summary

 (Average 4.6  out of 5 stars)
5 Rating
5 star:
 
(4)
4 star:
 
(0)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews