By Custom Molded Products



Part # 3260-01

Manufacturer Code 6-500-00

Dimensions 2.25" L x 2.25" W x 1.5" D

Alternate Part #'s 25563-160-000, 25563-161-000, 6-500-00, 650000, E23, LL23, POL2017348, 87-100-1506, PLS650000, POL-201-7348, PV650000, ZOD6-500-00

Product Description

Universal Wall Fitting by CMP for Polaris Pool Cleaners White - 6-500-00


?     Asked on 5/14/2015by Tom Klekamp

The old Polaris Universal Wall Fitting, cracked off when I tried to unscrew it. It was in place about 10 years and had a round flange (not a hex flange). So how do it get the remaining part of the Universal Wall Fitting removed with out damaging the plastic female threaded portion which appears to be cemented in the side of the pool. Does this make sense?

A  Answered on 5/15/2015 by InyoPools Product Specialist Andy O.

Tom- The easiest way that I've found to remove the universal wall fitting 3260-01 would be to take a pair of needle nose pliers, open them up inside of this fitting and rotate it out counter-clockwise.

?     Asked on 5/18/2016by Peter Mercuri

does this fit the wall hole to replace the jandy ray vac with the polaris 360?

A  Answered on 5/19/2016 by InyoPools Product Specialist Lennox H.

Hi Peter, This will fit the same hole as the Ray-Vac Quick Disconnect.

?     Asked on 6/8/2017by Steve

How do I remove a universal wall fitting. Seems to be stuck. Does it come off counter clockwise?

A  Answered on 8/3/2017 by InyoPools Product Specialist Alex V.

Steve,  The wall fitting is threaded into the wall. If it is stuck, you will probably have to use a wrench to remove the fitting similar to this how to guide

?     Asked on 6/6/2018by Karen

I want to know is this threaded regular or reverse threaded?

A  Answered on 6/6/2018 by InyoPools Product Specialist Lennox H.

Hi, Karen. This fitting has regular pipe threads.

?     Asked on 6/29/2018by Jerry

Can i get the measurement at the base where the treads are? ? I think this is the one I need,

A  Answered on 6/30/2018 by InyoPools Product Specialist Lennox H.

Hi, Jerry. The base with the threads is 1-7/8"


Review Summary

 (Average 5  out of 5 stars)
7 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews