Part # 5110-61
Manufacturer Code ECX1133
Dimensions 18" L x 12" W x 12" D
Alternate Part #'s ECX1133, 14-150-1050, HAYECX1133, HPPECX1133
Flex Tube Nest, EC30 - ECX1133
I have purchased a D>E> cleaner, do I have to disassemble the filter to clean the tubes?
Reply
John, If you have a large enough bucket or compartment to place the entire Tube Nest into to soak, then you don't have to disassemble unit to clean.
Reply
im getting the de back in to pool it seams to be by passing the filter is there something I can do about this?
Reply
Hi John, We have an aritcle on Getting DE Back Into Your Pool which will go over the common areas which cause this problem.
Reply
My filter fingers are 13 inches in length what nest should I be looking for?
Reply
Hi Mike the fingers on this nest are 13.5" long so I believe this is one you need, but to be certain could you email us the model # of your filter which should be on a label located on the side of your filter tank.
Reply
What is the cause of quick buildup of pressure once filter is turned on? I have had flex tubing cleaned and still have the issue.
Reply
Hi Jack, The flex tube could be old not allowing the water to flow through the unit.
Reply
