By Jacuzzi Inc.
Part # 5069-05B
Manufacturer Code 05386404R
Dimensions 4"
Alternate Part #'s 05386404R, 05386404R000, 05391404R, 351051862, 603102, 755306, 35-105-1862
INYO # 5069-05B JACUZZI # 05-3864-04-R THIS IS A 1-1/2 HP IMPELLER USED IN THE J, JCM, AND B SERIES BLACK PLASTIC IMPELLER INCLUDES: IMPELLER ONLY CLOSED FACE NUMBER OF VANES: 4 OUTSIDE DIAMETER: 4" THICKNESS: 7/16" (OUTSIDE THICKNESS AT OUTSIDE EDGE) THICKNESS: 1/4" (B) (INSIDE THICKNESS AT OUTSIDE EDGE) FRONT TO BACK: 3-1/4" (FROM END OF SHAFT TO FRONT ON INTAKE) INLET OUTSIDE DIAMETER: 2-1/16" INLET INSIDE DIAMETER: 1-13/16" SHAFT COVER LENGTH: 1-1/2" SHAFT COVER OD 5/8" (THIS IS WHERE THE IMPELLER SCREWS ONTO THE MOTOR SHAFT) MARKINGS: 05386404 IS WRITTEN ONTO THE IMPELLER FACE IN INK
How do I remove Impeller (#05-3864-04-R) from Pump Motor Shaft to replace the Mechanical Seal (#10-0002-6)
Reply
In order to remove a shaft seal you will need to hold the main motor shaft steady to unthread the impeller. Also some impellers have a screw in the center of it holding it to the motor shaft. One way to hold the motor shaft steady is to have a wrench holding it steady at the very back end of the motor where ther shaft come through and its squared off. Another way is to have a long screw driver lodged into to the fan by sliding it through the vent near the front underside of the motor.
Reply
