By Hayward Pool Products
Part # 5110-10A
Manufacturer Code SPX2600C
Dimensions 4.35" X 0.6"
Alternate Part #'s 25305-600-000, HAY1012049, SP2600C, SPX2600C, 35-150-2449, HPPSPX2600C, X2600C
Impeller 0.5 THP - SPX2600C
How do you clean a blocked swimming pool pump impeller?
Reply
We have a good article here on How to Clean Out a Pool Pump Impeller which will give you a step by step process on how to clean out your impeller.
Reply
My pump is producing enough vacuum to operate the filter, but it is making noise.
Took the four bolts off the housing to get to the internal parts, but not sure how to separate the impeller to see if it is clogged.
Couldn't figure out how to separate the individual parts. Don't want to break anything, so I didn't use much force.
Reply
Hi Milt, You can watch or follow the steps in our How To: Replace a Pump Shaft Seal for instruction on how to remove the impeller from the motor shaft.
Reply
Does buying a new Hayward impeller include the shaft seal?
Reply
No the shaft seal is not included with the impeller, you will require this AS1521 Shaft Seal with this impeller.
Reply
Is the the correct impeller for a Hayward MaxFlo pump with a UST1072 3/4 HP uprated motor. The pump is new and running very hot - do I need a 1/2HP or 3/4HP impeller?
Reply
