Raypak Inlet/outlet Header, Plastic - 006706F

$446.99

IN STOCK
FREE SHIPPING

Part # 6234-119

By Raypak


Details

Top

Part # 6234-119

Manufacturer Code 006706F

Alternate Part #'s 006706F, 52521, 47-197-1712, RAY-151-3708, RAY006706F

Product Description

Inlet/outlet Header, Plastic - 006706F

Inlet/Outlet Header, Raypak 185/207A/206A/R185A/R185B, Capron

Top

?     Asked on 4/25/2018by Joe

If I replace the header does the header come with all the parts inside? Like the unit her piece and cap? Thanks
 Reply

A  Answered on 4/25/2018 by InyoPools Product Specialist Lennox H.

Hi, Joe. This part does not, you will need the Inlet/outlet Header Complete Kit, Plastic - 006827F
 Reply


?     Asked on 1/20/2018by Ric

Looking at the picture of the "Inlet/outlet Header, Plastic (006706f)" on your website. In between the inlet and the outlet you can see what looks like a flush plug. (I am not referring to the drain on the bottom.) I see another question about this same item and the answer was that you need the drain plug. Will a drain plug fit here as well? Can I remove this from the outside or will I have to remove the header? A plug will be a lot cheaper than a new $200 header.
 Reply

A  Answered on 1/22/2018 by InyoPools Product Specialist Lennox H.

Hi, Ric. The exploded view that shows the replacement parts does not show any other plugs. There is a plug that holds the place of the optional Pressure Relief Valve - 008091F. The replacement plug is not sold as a separate part. 
 Reply


?     Asked on 9/17/2017by Sean

Hello, I only need the plastic plug with the square adjustment slot that goes into the top of the inlet opening. I think it is called a header plug, but the only ones I see anywhere are metal and not plastic. The one I broke was black plastic. Can I buy this? Does it have a part number?? Thanks
 Reply

A  Answered on 9/21/2017 by InyoPools Product Specialist Lennox H.

Hi, Sean. There is not a replacement plastic plug that is available. You will have to use the Pressure Relief Valve (125PSI) - 008091F.
 Reply


?     Asked on 5/21/2017by Inyo Visitor

Water is leaking from the unitherm plug cap. I see from the pics that there are threads. What do I use to unscrew it to replace it?
 Reply

A  Answered on 5/24/2017 by InyoPools Product Specialist Lennox H.

Hi. There is not a special tool needed for removing the Unitherm Governor Plug 006720F.
 Reply


?     Asked on 4/30/2016by Aple S

on my P-R185A . the inlet outlet header is leaking where the top bolts are, do I just replace the bolts and gaskets or do I replace the whole header. also the cap for the unitherm governer plug will not stay on ,when pressure builds up it shoots off,is the threads stripped? thanks
 Reply

A  Answered on 5/2/2016 by InyoPools Product Specialist Lennox H.

Hi Aple, I would recommend getting the Complete Inlet/Outlet (006827F), it will resolve all your issues.
 Reply


?     Asked on 2/29/2016by Inyo Visitor

I have a leak between the inlet & outlet from what appears to be a flush mounted plug on the outside. Is this replaceable or do you have to replace the whole unit. Part #11 in the diagram.
 Reply

A  Answered on 3/1/2016 by InyoPools Product Specialist Lennox H.

Hi, The Drain Plug (006721F) will be the part that you'll need to replace based on the description provided.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)