By Pentair Pool Products



Part # 4600-4512

Manufacturer Code 154512

Dimensions 15.5" L x 6.5" W x 0.45" D

Alternate Part #'s 154512, PAC0512832, 31-110-1398, PEN154512

Product Description

Lid Wrench Plastic - 154512 for Models TA/TR40, 50, 60


?     Asked on 4/21/2013by Guest

How strong is this plastic wrench? I haven't removed the lid in years.

A  Answered on 4/21/2013 by InyoPools Product Specialist Patrick P.

The wrench is a very sturdy plastic. If the lid hasn't been removed for several years, you may need to tap lightly on the wrench with a rubber mallet. I would also recommend replacing the o-ring.

?     Asked on 10/1/2015by RAFAEL

Is this wrench 9" ?

A  Answered on 10/7/2015 by InyoPools Product Specialist Lennox H.

Hi Rafael, The Lid Wrench Plastic (154512) is not 9", it's 8.5" diameter.

?     Asked on 10/7/2015by Rafsel Ferreras

Lid Wrench Plastic that I'm looking for is for Pentair Tagelus Sand Filter Model 145240. PLT------TA100D. The Manuel says wrench 9" Filo ALEJE #15-1608

A  Answered on 10/9/2015 by InyoPools Product Specialist Lennox H.

Hi Rafsel, The Adapter Wrench (151608) would be the wrench needed for the TA100D model.


Est. Repair Time

2 to 4 hrs

Tools Needed

Screwdriver, Nut Drivers

needed proper tool for removal of valve on top of sand filter....this was the one for the job

Written on 4/6/2022 by Guest

shut the pump down...bled off the pressure...removed the valve..replaced with a new valve, which was ordered from INYO.....turned pump back on checked for any leaks....all good to go

Both products worked like a charm......saved $100's of dollars by just biteing the bullet any trying to do it myself....turned out to be no issues...just take your time

Were these instructions helpful? 


Review Summary

 (Average 5  out of 5 stars)
2 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Recent Reviews