Jacuzzi R Series Nut Assembly - 42282806R



Part # 4665-06

By Jacuzzi Inc.

  4.8 Average  



Part # 4665-06

Manufacturer Code 42282806R

Dimensions 7.5" X 1.5"

Alternate Part #'s 011202, 171051025, 42282806, JC42275909, 17-105-1025

Product Description


Frequently Bought with this Nut Assembly

Clear Strainer Cover 5067-17

Cover Handles - 16100100R2 sold separately. 

**NOTE: Shown in Yellow for illustration purposes.**


?     Asked on 5/21/2019by dave

does this have the o ring gasket? if not what is the part number . thanks dave

A  Answered on 5/30/2019 by InyoPools Product Specialist Michelle B.

Hello, This does not come with the gasket. What is the brand and the model of your filter?

?     Asked on 1/19/2018by Scott

is there a tool i can use to remove the nut assembly

A  Answered on 1/19/2018 by InyoPools Product Specialist Lennox H.

Hi, Scott. Unfortunately, there is not a tool available for removing this Lock Ring. 

?     Asked on 5/12/2017by Buck

Adam, In reference to your discussion with Mike about the tool for removing the Jacuzzi Magnum Force filter retainer ring, all indications are that it has been discontinued. Why? I don't know! For your information, the only strap wrench I have been able to find with a strap long enough to fit the retainer ring is by Whirlpool at Lowe's for $9.95 and can be found in the water filter department or ordered on line.

A  Answered on 5/13/2017 by InyoPools Product Specialist Patrick P.

Buck, Thanks for the helpful information!

?     Asked on 1/25/2017by Mike

Actually, not true. Have one now but flange is bent. Care for a picture?

A  Answered on 1/26/2017 by InyoPools Product Specialist Alan M.

Hi Mike, I went through a list of lid wrenches we carry and could not locate one for the Jacuzzi filter series the lock nut belongs to. If you would like to provide a part number and a photo, you can send it via email to upload@inyopools.com  ATTN: Alan and I will be more than happy to research a replacement for you. Thank you for your question!

?     Asked on 1/25/2017by Mike

I am looking for a type of "wrench" to remove the cover/nut described above.

A  Answered on 1/25/2017 by InyoPools Product Specialist Adam Y.

Mike, They do not sell a wrench for that lock ring. What you can do is get an adjustable strap wrench. You can pick one up at your local hardware store. That will work great.

?     Asked on 6/8/2015by Pierre Godin

Is the new model stainer nut with handles for removal available for sale

A  Answered on 6/16/2015 by InyoPools Product Specialist Lennox H.

Pierre, At the moment this is the only Locking Nut Assy we have for the Jacuzzi 25EF Cartridge Filter.


Est. Repair Time

Less than 1 hr

Tools Needed


Old nut assembly was deteriorated from sun no way to tighten ring

Written on 5/2/2020 by Guest

New gasket needed as air was seeping between lid and gasket.

Added new gasket the correct one, do not try to get another product similar. No need for lube. Hand tight only

Were these instructions helpful? 


Review Summary

 (Average 4.8  out of 5 stars)
5 Rating
5 star:
4 star:
3 star:
2 star:
1 star:

The Most Helpful Review

The Most Recent Reviews