Part # 4651-21
Manufacturer Code 14930-0033
Alternate Part #'s 149300033, 27-102-1314, PEN14930-0033, PEN149300033
INYO # 4651-21 PENTAIR / STA-RITE # 14930-0033 GENERAL DESCRIPTION: THIS IS THE COMPLETE MAIN SHAFT WITH SPACERS, THE HANDLE AND TOP CAP ARE NOT INCLUDED GENERAL INFO MATERIAL: SHAFT: BRASS SPACERS: WHITE PLASTIC TOP CAP: BLACK PLASTIC (NOT INCLUDED WITH THIS ASSEMBLY) HANDLE: ALUMINUM (NOT INCLUDED WITH THIS ASSEMBLY) DIMENSIONS: LENGTH: 16" (A) (NOT INCLUDING HANDLE) SHAFT DIAMETER: 1/2" (B) SPACERS: TOTAL # 2 SPACERS INCLUDED DIAMETER: 2-5/8" THICKNESS: 1/2" FROM OUTSIDE TO OUTSIDE GROOVE: 1/4" SPACING: (MEASURED ON CENTERLINE FROM FIRST SPACER WITH THE FIRST SPACER AT ZERO) 1ST 0 2ND 7-13/16" SPACER O-RINGS: (2) INCLUDED THESE ARE STRETCHED ON TO THE SPACERS SO THE DIMENSIONS SHOWN ARE FOR THE ORIGINAL O-RINGS BEFORE THEY ARE STRETCHED OUTSIDE DIAMETER: 2-11/16" INSIDE DIAMETER: 2-5/16" HOLES IN SHAFT: (MEASURED ON CENTERLINE FROM THE HANDLE END OF THE SHAFT) HOLE: 1/8" AT 1/4" FROM END ASSEMBLY INCLUDES: SHAFT WITH 2 SPACERS O-RING FOR EACH SPACER (2 TOTAL) MARKINGS: THERE ARE NO MARKINGS
*******************************************************************************
TOP PLATE INFO INCLUDED? NOT INCLUDED INYO # 4651-22 PENTAIR / STA-RITE # 14930-0032 GENERAL DESCRIPTION: THIS IS THE TOP PLATE ASSEMBLY USED IN SOME STA-RITE PUSH PULL VALVES STA-RITE CALLS THIS AN INDEX PLATE MATERIAL: THE ORIGNAL MATERIAL WAS BRASS THE CURRENT VERSION IS MADE OF BLACK PLASTIC SHAPE: ROUND WITH 6 HOLES AROUND THE EDGE EACH HOLE CENTERLINE IS 3/16" FROM THE EDGE EACH HOLE CENTERLINE IS ABOUT 1-3/4" FROM THE NEXT DIMENSIONS: OUTSIDE DIAMETER: 4" (A) TOTAL HEIGHT: 2" (B) CENTER HOLE DIAMETER: 1/2" INCLUDES: TOP INDEX PLATE 2- SPRING PINS TOP PLATE O-RING MARKINGS: 4930-9" IS MOLDED INTO THE UNDERSIDE
*******************************************************************************
HANDLE INFO INCLUDED? NOT INCLUDED INYO # 4651-23 PENTAIR / STA-RITE # 21300913 GENERAL DESCRIPTION: THIS IS THE HANDLE USED IN SOME STA-RITE PUSH PULL VALVES MATERIAL: ALUMINUM SHAPE: LEVER STYLE THERE ARE 3 HOLES IN THE BODY OF THE HANDLE DIMENSIONS: LENGTH: 9" (A) WIDTH: 3-1/2" HEIGHT: 4-1/4" (B) INCLUDES: HANDLE 2- BRASS LINKAGE PINS 3- PINS MARKINGS: "14936-14" CAST INTO THE HANDLE
*******************************************************************************
The Most Recent Reviews
(5 out of 5 stars) Fits Perfectly
Reviewed By: Inyo Customer ()
Fit the housing perfectly. No more leaks!
Was this review helpful to you?