Part # 4679-18
Manufacturer Code 77704-0104
Dimensions 6" L x 6" W x 9" D
Alternate Part #'s 77704-0104, 777040104, PEN77704-0104
STA-RITE # 77704-0104 PLUG AND COVER ASSEMBLY FOR A STA-RITE TOP MOUNT VALVE CLAMP ON STYLE, USED ON THE WATERFORD / CRISTAL-FLO FILTERS THE PLUG AND COVER ASSEMBLY INCLUDES: HANDLE, HANDLE PIN,COVER, DIVERTER WITH GASKET, SPRING, ALL WASHERS, AND DIVERTER STEM O-RING
will it fit Sta-Rite T-240BP-1
Reply
Hello Robert. The Pentair Products Plug & Cover WC112 Series, part 77704-0104, will fit the Sta-Rite T240BP-1 if it has the original Sta-Rite 1-1/2" WC112 Series Multiport Valve. Sta-Rite 1-1/2" WC112 Series Multiport Valve Note Key item 17.
Reply
Q:Will this fit my Sta-rite t210wf sand filter
Reply
Hi Court, could you send us a few photos of the complete valve and top label on it? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
If I have a T-200BP-1 is this the replacement part if I have water leaking from my backwash line when the pump is working? It doesn't leak when the pump is off.
Reply
What is the thread size of the port hole for the pressure gauge
Reply
1/4 inch
Reply
1/4 mpt 4726-0 Pressure Gauge, 1/4"mpt, 0-60psi, Bottom Mount, Generic
Reply
Hi will this fit a hi rate sta rote model t-240bp
Reply
Hi, Dave. It will if you have the original Sta-Rite 1-1/2" WC112 Series Multiport Valve.
Reply
will this product fit this model number AT3124?
Reply
Hi. This part will fit the WC112 Series MPV which is used with the original AT3124 filter.
Reply
I have a Sta-Rite T200TB-1 sand filter and it is leaking out the back. The spring is wore out so it doesn't hold the down like it should. From the research I've done the whole top assembly (valve) of my filter is part #WC112-148A, but it is no longer available. The replacement valve is the MPV-261186.
Will this Pentair 77704-0104 work for the top of my valve or do I need to get the whole replacement valve (261186)?
Reply
Is this part compatible with the Sta-rite Cristol-Flo T-240BP-1 sand filter? I stripped the threads for the pressure gauge and need to replace the cover assembly/multiport valve.
Reply
Yes this would be the correct filter valve cover assembly for the the Sta-rite Cristol-Flo T-240BP-1 sand filter.
Reply
Will this part stop my filter from leaking out of the back flush port while in the filter position ?
Reply
Wayne, When the spider gasket is bad or no longer able to seal properly that can cause the issue you're having. Replacing this cover assembly will more than likely solve your problem.
Reply
The Most Recent Reviews
(5 out of 5 stars) Good product.
Reviewed By: Inyo Customer ()
Fit great and easy install
Was this review helpful to you?
(5 out of 5 stars) Good replacement part
Reviewed By: Walter ()
Good customer service and fast shipping. This unit solved the leaking problem of my sand filter and it is highly recommended.
Was this review helpful to you?