Pentair Air Relief Strainer, 3/8" - 150035

$11.99

IN STOCK

Part # 4601-0035

By Pentair Pool Products

  4 Average  

Details

Top

Part # 4601-0035

Manufacturer Code 150035

Dimensions 1-1/4" x 3/8"

Alternate Part #'s 150035, 31-110-1420, PEN150035

Product Description

INYO # 4601-0035 PENTAIR # 150035 THIS IS AN AIR RELIEF SCREEN USED ON A NUMBER OF PENTAIR FILTERS THIS SCREEN IS ROUND, WITH A RUBBER BASE. THE SCREEN MATERIAL ATTACHED TO THE BASE IS A METAL MESH VERY MUCH LIKE THE METAL MESH ON A SCREEN DOOR. THERE ARE 3 AIR RELIEF SCREENS MADE LIKE THIS. THE DIFFERENCE IS IN THE DIMENSIONS AND THE HOLE IN THE BOTTOM OF THE RUBBER BASE. EACH SCREEN IS USED WITH A DIFFERENT TUBE SIZE, SO THE HOLES ARE DIFFERENT SIZES. THE PART NUMBER AND DIMENSIONS OF EACH WILL BE SHOWN HERE.

*******************************************************************************

DIMENSIONS: 4600-2855 (172855) DIAMETER: 1-3/4" HEIGHT: 1-1/2" HOLE SIZE: 3/4"

***********************

4600-4578 (154578) DIAMETER: 1-1/4" HEIGHT: 7/8" HOLE SIZE: 1/4" (JUST A LITTLE UNDER 1/4")

***********************

4601-0035 (150035) DIAMETER: 1-1/4" HEIGHT: 7/8" HOLE SIZE: 3/8"

*******************************************************************************

NOTE DATE: 5-7-2009

Top

?     Asked on 10/25/2020by mike

Does the air strainer just float around in the filter or is it attached to something, I changed the sand in the filter but someone else took it apart. thank you in advance
 Reply

A  Answered on 10/26/2020 by InyoPools Product Specialist Megan C.

Good day Mike, the Air Relief would attach to the Tube shown here in key 9 which key 9 at attaches to the Lower piping assembly.
 Reply

  • Commented on 10/29/2020 by Product Owner

    Hello .i was wondering what is the purpose of a air relief strainer in your triton 2 sand filter . Thank you in advance.have a great day
     Reply

    • Commented on 11/10/2020 by InyoPools Product Specialist Megan C.

      The strainer air relief is designed to help release pressure inside of the tank and piping assemblies in the unit. There are two strainer reliefs for the Triton II Sand filters. The Strainer, Air Relief (154578) is for months & years before 11/1999. The Strainer Air Relief 3/8" - 150035 is for 11/01/1999 and after. 
       Reply


?     Asked on 7/24/2019by James E B Smith

Do you have a 3/8" diameter x approx 23" long air breath tube for Triton II, TR100 filter. Apparently I have an odd filter because all are listed at 1/4" diameter. My strainer has a 3/8" opening. Thanks, Jeb

 Reply

A  Answered on 7/26/2019 by Industry Professional

The TR100's based on the year, pre 99 mfg # 154437 ( 31-110-1432 ) was 25-1/2" x 1/8" I.D. x 1/4" O.D., the post 99 unit mfg # 150041 ( 31-110-1434 ) is 1/4" I.D. x 3/8" O.D. we looked at all the TR models including the commercial so not sure on your 3/8"
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

Changed strainer while maintaining the pressure indicating system.

Written on 11/3/2019 by Guest

1. Chamged the pressure system housing and changes this strainer during this operation.
2. System was dismantled for change our so no tools we're needed to change the strainer only.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4  out of 5 stars)
1 Ratings
5 star:
 
(0)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews