Pressure Switch - 062237B

$47.99

IN STOCK
FREE SHIPPING

Part # 6230-32

By Raypak

  5 Average  

Details

Top

Part # 6230-32

Manufacturer Code 062237B

Dimensions 2-5/8" x 1-7/8"

Alternate Part #'s 062237B, 473191005, MSPSEE05Q39, RAY1513584, 47-197-1000, RAY-151-3584

Product Description

Pressure Switch - 062237B

Top

?     Asked on 9/23/2021by Dwight M Upston

I have a new Raypak 156A heater.. my heater is below in the basement and tub upon main level... @ 6 ft lower than tub...problem is the pressure switch shipped with the new heater... heater comes on as soon as I put power to it... adjusted turn knob both ways and heater still fires up with out pump running what pressure switch do I need ??? (attached is the original switch) Thanks Dwight

 Reply

A  Answered on 9/23/2021 by InyoPools Product Specialist Rich N.

Hi Dwight.  This Special Pressure Switch, 11 PSI - 009133F will take care of that for you.  
 Reply


?     Asked on 9/19/2021by James

Will this work with a 406A (model PR406A-EN-C)
 Reply

A  Answered on 9/22/2021 by InyoPools Product Specialist Rich N.

Hi James, This Water Pressure Switch (Plastic Header) - 006737F will be the correct pressure switch for your Raypak P-R406A-EN-C Heater.
 Reply


?     Asked on 8/20/2020by JOHN NOLAN

Is this the same pressure switch that would be used in Model PR226A-MP-C?
 Reply

A  Answered on 8/20/2020 by InyoPools Product Specialist Lennox H.

Hi, John. This Pressure Switch - 062237B will not work with your model,  the Water Pressure Switch (Plastic Header) - 006737F is the correct part. 
 Reply


?     Asked on 3/26/2020by John

Is my part pictured below compatible with your part?Pressure Switch - 062237B

 Reply

A  Answered on 3/26/2020 by Industry Professional

Yes, this is a good choice for a substitute.
 Reply


?     Asked on 8/13/2019by Robert

Just want to be certain, have a RP2100, model R185, installed in this date range. Manual is effective ‘93 and letter is stamped ‘97. Believe this is the correct pressure sensor, please let me know for sure. Thank you.
 Reply

A  Answered on 8/14/2019 by Industry Professional

Yes, it is the correct replacement.
 Reply


A  Answered on 8/13/2019 by Industry Professional

We show the pressure switch to be either a 009133F 11 psi ( 47-197-1096 ) or a 006737F 1.7 psi ( 47-197-1462 ) depending on the installation of the heater. Deck level, the 1.7 psi is fine, below water level may require the 11 psi.
 Reply


?     Asked on 7/30/2019by Philip miracle

Will this fit model 266 raypak
 Reply

A  Answered on 7/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Philip. This pressure switch will NOT work with the RP2100 R266A model. You will need P/N 006737F
 Reply


?     Asked on 6/21/2019by Becca

Is this the correct part to fit the Raypak heater P-R405A-EP? Appreciate your help!

 Reply

A  Answered on 10/2/2019 by InyoPools Product Specialist Michelle B.

Raypak list a 006737F or 009133F see adjustment is service manual-see www.raypack.com to confirm depending on installation
 Reply


A  Answered on 9/27/2019 by Industry Professional

Raypak list a 006737F or 009133F see adjustment is service manual-see www.raypack.com to confirm depending on installation
 Reply


A  Answered on 9/26/2019 by Industry Professional

No, see snip image attached for correct pressure switch part #'s. There are 2 based on the lb rating of your switch.

 Reply


?     Asked on 1/17/2019by Karen

What is the difference between a 062237B and 062237F. Can they be interchanged?
 Reply

A  Answered on 1/18/2019 by InyoPools Product Specialist Michelle B.

Hello, Are there any other part numbers I can reference 062237F by? Nothing is coming up on our website with that part number.
 Reply


?     Asked on 7/3/2018by robyn

What is the difference between this model number and the model number in the manual 006737f? Is 6737f OEM ?
 Reply

A  Answered on 7/3/2018 by InyoPools Product Specialist Lennox H.

Hi, Robyn. The specifications are different, this Pressure Switch - 062237B is used with the older Raypak models, Part # 006737F is used with the newer models. 
 Reply


?     Asked on 8/29/2016by Greg Allton

Pilot light is on but the burner won't light. Switch is on temp. Switch is up to where heat is called for but will not fire the burner. Is there a switch that tells the unit water pressure is up and it's ok to fire. I need to get this unit running.
 Reply

A  Answered on 8/31/2016 by InyoPools Product Specialist Stacey M.

Hello Greg, you might want to troubleshoot with Raypak 805-278-5300 just in case there might be a misc part.
 Reply


?     Asked on 10/8/2015by Inyo Visitor

is this pressure switch on a Raypak C-R406A-EN-C? If so where is located
 Reply

A  Answered on 10/9/2015 by InyoPools Product Specialist Lennox H.

Hi, The Pressure Switch (006737F) would be the correct pressure switch for the Raypak C-R406A-EN-C Heater. It is located at the top of the Inlet/outlet Header.
 Reply


?     Asked on 7/27/2014by Guest

I need a new pressure switch for my Raypak RP2100 Pool-Spa heater that was installed in 1998. Is this the proper replacement pressure switch?
 Reply

A  Answered on 7/27/2014 by InyoPools Product Specialist Patrick P.

Yes this would be the correct replacement pressure switch for the Raypak RP2100 Pool-Spa heater.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews