Part # 4685A
Manufacturer Code 18201-0200
Dimensions 19.5" L x 11" W x 9.5" D
Alternate Part #'s 18201-0200, 182010200, 27511-200-000, STA06253, WC212-150PN, 26-102-1030, PEN18201-0200, STA-06-273
Multiport Valve D.E. 2" - 18201-0200
Six position dial-type valves offer convenience, ease of use, and efficient operation. Includes connecting pipe to match side ports in Sand and D.E. filters. 2 inch PVC unions for filter-to-valve connection. Positive seal prevents leakage between ports.
What is the correct multiport valve for swimquip sand filter hrp-24
Reply
Where can I get an owners operation and maintenance document for the 18201-0200 multi port valve?
Reply
Hello Steve. Attached please find the Pentair/Sta-Rite model 18201-0200 MULTI-PORT FILTER VALVE O W N E R’ S M A N U A L
Reply
Hi, I have a Sta-rite mult-port selector value WC212-150PN. I believe it now maps to this model.
The diverter/key assembly that holds the handle in with the pin broke (attached picture). Can I replace this part? It's labeled SP-715-C.
Yes, the WC212-150PN is replaced by the Multiport Valve D.E. 2" - 18201-0200
Reply
I need to rebuild my 18201-0200 valve. Do you sell a kit or can you recommend the parts I should order? The handle has become difficult to turn to the various selections and my backwash port seems to always have a slow drip.
Reply
We would suggest this Upper Handle Assembly along with this Spider Gasket
Reply
I have a Praher Plastics SM2-SR2... Apparently companies OEM the Praher multiport valves... Is this the same as the SM2-SR2 which has an external model of SM20-2? I'm ultimately trying to find a new vertical DE filter to fit the SM2-SR2 to since it doesn't fit my old Titan filter.. This is like finding a needle in a haystack!!
Mike
Reply
Hi, Michael. This Pentair/Sta-Rite MPV - 18201-0200 can be used to replace the Praher SM2-SR2 and vice versa.
Reply
I have the Sta-Rite System 3 sand filter, model S8S70. The owner's manual lists multi-port valve part no. 18202-0200 as the correct valve. Is this the same as part no. 18201-0200? Part no. 18202-0200 seems to be no longer available on the market.
Reply
Hi Djay, Yes this 18201-0200 is the proper replacement for the 18202-0200 valve.
Reply
I'm looking for the slide valve for a s7d75 but this multi valve comes up well this work on that filter with some replumbing?
Reply
Hi, Arron. The Pentair 2" Slide Valve - 263053 will fit the S7D75 filter.
Reply
i have a stay rite DE filter with a WC27-91 selector handle. It has 6 screws and will not rotate. can I just replace the handle?
Reply
Hi, Marvin. Unfortunately, most of the replacements parts for the Sta-Rite WC27 Series valve are no longer available.
Reply
I need a selector valve 18201-0200, it has 10 screws. all the products I find include the entire set up. cant I just buy the selector valve?
Reply
Hi. You can use p/n SPX0715BA3 if you need to replace they cover assembly for this valve.
Reply
Have a relatively new WC212-150PN selector valve but water seeps up in the center, fills the selector slots and overflows from the top. Not a flood but it spills over. I've replaced the spider valve underneath. Must I replace the entire valve handle assembly or are there serviceable gaskets or O-rings within? Note that the valve handle assembly when removed (and when in situ) springs back in place immediately so the assembly doesn't seem like it needs replacement were it not for the leakage.
Reply
Good morning Bryan, If it is leaking up through the handle then you would need a handle kit. It comes with the spring, washer's and o-rings. If it is leaking from the sides where it screws together. Then you would need a top o-ring. if this is to complicated in rebuilding the handle. I would recommend just purchasing the whole top and replacing it.
Reply
I have a Sta-Rite HRPB30 filter. Is part number 18201-0200 (4685A) the correct valve for 2" pvc plumbing?
Reply
Good Morning Mel, Yes that part#Valve Assy., Multiport 2in (18201-0200) (wc212-150pn) is the correct piece 2"
Reply
Replumbing sta rite 18201-0200 multiport valve. Is top port on side (not the filter connections) the connection for the input from pump to the filter and the lower port the connection for output from valve to pool?
Reply
Hi, Yes, The upper left port is the pump port and the lower right port is the pool return port.
Reply
I just purchased the Sta Rite System 3 S8D110 Filter (53 sq ft) from your site.
Is this the right backwash filter for the filter I just bought (part number 18201-0200)?
Reply
Hi Greg, The 2" Multiport Valve Assy. (18201-0200) would be the correct valve that would fit onto the Sta-Rite S8D110 Filter.
Reply
need to replace swim quip WC27-91 multiport valve. Can you recommend a replacement? Thanks
Reply
We would suggest this valve as a Replacement Valve for the SwimQuip WC27-91 Valve.
Reply
Hi, I cant tell from the info for PART#4685A, are the unions for this valve female threads? or the type that use hose clamps?
Reply
The unions on this Multiport valve is female threaded, no clamp is needed to connect the valve to the filter tank.
Reply
I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
The Most Recent Reviews
(5 out of 5 stars) Quick delivery
Reviewed By: Stephanie L. from Oklahoma ()
Pros: On Line chat help
Cons: None
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Curtis P. from Broken Arrow, OK ()
Thanks so much for being prompt and quick. Part worked great
Was this review helpful to you?