$363.99
Part # 2803-023
Manufacturer Code R0403700
Alternate Part #'s R0403700, JDY-451-3700
INYO # 2803-023 JANDY # R0403700 THIS IS THE SENSOR USED ON THE JANDY AQUAPURE, ALL VERSIONS. THIS IS THE OLDER THREADED VERSION. THIS IS A COMBINATION SENSOR WHICH MEASURES FLOW, TEMPERATURE, AND SALINIITY THIS SENSOR HAS AN 8 FOOT CABLE THERE IS ALSO A VERSION WITH A 16 FOOT CABLE. THE 16' VERSION IS INYO # 2803-024 THIS SENSOR IS BASCIALLY A GREY, 1-1/2" MALE PIPE THREAD PLUG WITH A CABLE ATTACHED. (ACTUAL DIAMETER OF THE PIPE THREADS IS 1-9/16") THE ENDS OF THE 3 SENSORS ARE VISIBLE ON THE BOTTOM OF THE SENSOR KIT AS 3 SMALL ROUND METAL CIRCLES INCLUDES AN 8' CABLE WITH AN 8 PIN FEMALE CONNECTOR ON THE END "AQUAPURE JANDY POOL PRODUCTS FLOW/TEMP/SALINITY SENSOR H0567300" IS PRINTED ON THE TOP OF THE SENSOR
Which sensor do i need for a PLC1400? I took a picture of mine but there is no visible part number.
Reply
Hi Kerdace, The AquaPure Flow Sensor 8' Cable (R0403700) or 16' Cable (R0403800) can be used with the PLC1400 cell.
Reply
Is R0403700 compatible with a Chlormatic 3 CM601 system? If not, is it possible to find an appropriate replacement flow/temp/salinity sensor? In hope!
Reply
Hi Bob, The Flow Sensor w/16 Cable (R0403800) is the replacement that can be used with the CM3
Reply
What product replaces this 8 foot sensor cable for the aquapure 1400
How do you know if it's the sensor or the main box that is not working?
My system reads no flow and not making any chlorine
Reply
You would use the Aquapure Flow Sensor W/ 8' Cable - R0403700 for your Aquapure 1400. We apologize for the inconvenience, however, we do not troubleshoot these units. For the best assistance with isolating the issue, I suggest calling Jandy directly and speaking to their technicians. They can ve reached by calling 800.822.7933.
Reply
