$366.57

Qty:

By Hayward Pool Products


Details

Top

Part # 2807-10

Warranty One Year Warranty

Manufacturer Code GLX-PCB-RITE

Dimensions 9" L x 6.5" W x 4" D

Alternate Part #'s G1-011056-1 REVB, G1-066604K-1, G1066604K1, GLX-PCB-RITE, GLXPCBRITE, 43-150-1026, HPPGLXPCBRITE

Product Description

We are now carrying an After Market Main PCB for the Hayward AquaRite for $267.99! Click here to view the After Market Hayward AquaRite Main PCB.

Goldline Main Printed Circuit Board (GLX-PCB-RITE)

This is the main printed circuit board for the Goldline Controls Aquarite salt chlorine system.  This is the board that typically goes bad if your unit is struck by lightning.  Works with the Aquarite 15k, 25k and 40k gallon models.

Take a look at our Reviews tab for feedback from customers regarding replacing this board.

Compatibility:

  • Hayward AquaRite
  • Goldline Aquarite
  • BioGuard Mineral Springs
  • SwimPure Plus
Top

?     Asked on 5/23/2019by deborah J fontenot

mine is a hayward pcb board G1-066012F-1 Rev A ALSO SAYS G1-011056-1 REV C SO WHICH IS THE RIGHT MOTHERBOARD FOR MY AQUA RITE BY HAYWARD
 Reply

A  Answered on 5/25/2019 by InyoPools Product Specialist Lennox H.

Hi, Deborah. This is the correct replacement Main PCB for your AquaRite Controller. 
 Reply


?     Asked on 7/8/2019by Jay Hatcher

I need the main control board G1-066012E-1 / G1-011056-1 REV B Please advise the correct part number for a replacement
 Reply

A  Answered on 7/8/2019 by InyoPools Product Specialist Joe S.

Hi Jay, yes based on main control board G1-066012E-1 / G1-011056-1 REV B the Main Pcb, Aqua Rite - GLX-PCB-RITE, GLXPCBRITE would be the correct board.
 Reply


?     Asked on 7/12/2019by DAVID WILLIAMS

After I installed this pcb the salt reading on the inside control panel shows 0ppm
 Reply

A  Answered on 7/18/2019 by InyoPools Product Specialist Lennox H.

Hi, David. You will need to check the cell voltage, cell amps and the instant salinity reading to make sure that they are within range. If the cell amps are reading 000, then you will have to have the cell check.
 Reply


?     Asked on 2/23/2020by Peter Whiteland

Hi, My PCB (G1-066012C-1) has a fan connected to J3 and something else connected to J8. I don't see either of these connections on the 2nd product image. Will these connectors be present on the new board? Thanks

 Reply

A  Answered on 2/26/2020 by InyoPools Product Specialist Lennox H.

Hi, Peter. The new board will NOT have those connectors. The Fan is no longer required. I'm not sure what the J8 terminal is for. 
 Reply


?     Asked on 4/3/2020by Derya Yavalar

I see this board, but also there is a smaller board over top of it. Is the price also includes the small board Thank you
 Reply

A  Answered on 4/3/2020 by InyoPools Product Specialist Patrick P.

Hi Derya, No this does not included the smaller board (display board), if you need the display board then you can view our purchase that through this link here Hayward AquaRite Display Board
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews