Part # 4663-31
Manufacturer Code CCX1000D
Dimensions 21.5" L x 18" W x 3" D
Alternate Part #'s CCX1000D, 17-150-1295, HAYCCX1000D
INYO # 4663-31 HAYWARD # CCX1000D
************************************************
GENERAL DESCRIPTION: HAYWARD XSTREAM FILTER, SWIM PRO VOYAGER FILTER THIS IS THE BODY LOCK RING ASSEMBLY. THIS IS A STANDARD ROUND LOCK RING WITH A HANDHOLD ON EACH SIDE THE LOCK RING CURVES ON THE OUTSIDE WITH THE MAXIMUM DIAMETER AT THE BOTTOM
************************************************
BASIC SPECS: COLOR: BLACK DIMENSIONS: DIAMETER: 11-13/16" (MAXIMUM OUTSIDE DIAMETER) DIAMETER: 16-7/8" (INSIDE DIAMETER AT THE BOTTOM) DIAMETER: 15-11/16" (INSIDE DIAMETER AT THE TOP) 21-3/16" FROM HANDLE TO HANDLE OUTSIDE
************************************************
MARKINGS: THERE ARE NO MARKINGS
************************************************
INCLUDES: LOCK RING 1 SET OF 2 SAFETY CLIPS
How do you install 2 new safety clips on the lid locking ring assembly on a Swim Pro Voyager? Does the locking ring come off the lid???
Reply
I just got this replacement part but can't get it to seat right. Is there a trick to getting it on?
Reply
If the Lock Ring Ass'y W/ Safety Clips - CCX1000D is not properly seating on the filter tank, I recommend replacing the Body O-ring - CCX1000G and applying the Magic Lube O-ring Lubricant 1 Oz. Teflon - 630 to the O-Ring.
Reply
I can't get the ring to screw all the way down for the locking tabs to engage.
Reply
My lock ring for a SW 1000Z4 cracked and water is leaking. I took the top off but can't get ring off to replace it. Should I just get a whole new top and ring replacement
Reply
Hello Bob, I would replace the whole unit.
Reply
will it fit clear water cw2-107051
Reply
Hi, Joe. This Lock Ring will not fit that model filter, you will need the Filter Nut With Lock Tabs - 550-2060.
Reply
Is there different swimpro voyager filters? Or just one model type that this will fit?
Reply
Tracy, The Hayward X-Stream and Swim Pro Voyager uses the same parts, including the Lock Ring Ass'y W/ Safety Clips.
Reply
so how do I find how to replace it cannot get old one removed
Reply
The instructions for removal of the Hayward Stream Lock Ring would be as follows. 1. Shut off the pump. 2. Close valves* (*optional: suction & return valves). 3. Open air relief valve. 4. Open drain plug (located at the base of the filter body). 5. Depress safety latches (located on the underside of the locking ring handles) and unscrew locking ring in a counter-clockwise direction.
Reply