Part # 5110-25
Manufacturer Code SPX1600TRA
Alternate Part #'s S-0090, SPX1600TRA, 35-150-1706, HAY-101-1407, HPPSPX1600TRA
The 5110-25 (SPX1600TRA) kit is for the Hayward Super Pump and includes the following parts:
It is highly recommended to replace these parts when replacing the pump motor. A new shaft seal will help prevent leaks and protect the warranty on your motor.
Got a leak between the motor and pump. What parts do you suggest to fix our Super Pump ?
Hello George, the Tune Up Kit Hayward Super Pump GOKIT3 is the standard tune up kit for the Hayward Super Pump includes the shaft seal and all o-rings, gaskets and lubricant. This should be all you need, seal wise, to fix the leak between the motor and the pump.
I only need one seal. I do not need $30.99 worth of parts. Do I Have any options?
Hi, I just asked the question about what type of seal kit to purchase and I was asked to send my model #. I'm not sure this is the right one, but it is the UST1152 and I have one that says motor model C48L2N134C1. I am looking for just a motor, a seal kit, and a small tube of silicone. I think I have it all in my cart, but I'm not 100% sure. Thank you!
Hello Brandy- The model of the motor does not determine what seal kit you would need, the pump is what determines which one you need. If you can provide the model information from you pump (the plastic portion the motor attaches to) we can tell you what you're going to need. If you have any questions maybe this blog will help https://www.inyopools.com/Blog/pool-parts-101-the-difference-between-a-pump-and-a-motor/
On the Hayward 2600 series pump diagram, will Key 23 and 20 fit a SP2607X10 pump housing? My pump is leaking and the motor is only 1 year old.
Yes, this seal kit will work for your model pump and the slinger will work if the motor is the original or a direct replacement of it.
Number on pump is SP2607X10......what seal kit do I need
(4 out of 5 stars) Hayward Seal Assembly Kit
Reviewed By: chip ()
Pros: OEM gaskets and seal
Cons: more expensive than aftermarket kit
Original Equipment Manufacturer replacement seal and gasket from Hayward. Good quality, but installation instructions would be nice.