$350.73

Qty:

By Hayward Pool Products


Details

Top

Part # 5111-90

Manufacturer Code SPX1510Z24XE

Alternate Part #'s SP1510Z24XE, SPX1510Z24XE, 35-150-3261, HAYSPX1510Z24XE

Product Description

Motor 1 Hp 4 Pole 2 Speed (SPX1510Z24XE, SP1510Z24XE)

Top

?     Asked on 1/11/2012by Guest

What is Service Factor?
 Reply

A  Answered on 1/11/2012 by InyoPools Product Specialist Patrick P.

Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
 Reply


?     Asked on 2/2/2021by James M McDevitt

Do you have a picture of this pump ? Does it include the front manifold with impelers?
 Reply

A  Answered on 2/3/2021 by InyoPools Product Specialist Hector F.

Hi James, unfortunately, we currently do not have a photo of this motor however it will look nearly identical to the BN37V1 which is also a valid replacement for the SPX1510Z24XE motor. This motor does not come with any parts or seals needed however for us to recommend the correct parts could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos or quickest using our live online chat feature. Once we get those photos we can make the proper recommendation for your seal kit and other pump parts.
 Reply

  • Commented on 2/3/2021 by Product Owner

    attached are the pictures

     Reply

    • Commented on 2/8/2021 by InyoPools Product Specialist Hector F.

      Hi James, you have the Hayward PowerFlo 1500 series pool pump so the seal kit will be the GOKIT12. There may be an o ring that you will not need however the rest of the seals and o rings should be used. 
       Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)