Part # 4600-0085
Manufacturer Code 150085
Dimensions 6.5" L x 1.75" W x 1.75" D
Alternate Part #'s 150085, 31-110-1183, PEN150085
LATERAL SD60 AND SD80 EXTRA LONG (150085)
150085 laterals will not come out. Can I turn with some kind of wrench
thanks
Reply
Hi Jim, we don't recommend that. The sand works its way in over time and makes them hard to remove. Try to rotate them a bit and then rock them up a down a bit to disengage and pull them out of the standpipe. There's grit in there so it's not an easy off operation but not super difficult either. Be aware of any sharp edges on the sand barrel so you don't cut yourself.
Reply
I have the attached filter. How much sand do I need to use when I change it? What’s the correct part number for the laterals and the orings?
Hi Eric, this filter uses 325 lbs of sand, the lateral part number is 4600-0085, and please see this parts diagram for all listed o rings for this model filter.
Reply
Hello. I have a Triton ll TR 60 sand filter. Is this the correct part? And also is 350# of sand the correct amount?
Reply
Do you have a serial number off of this unit or know the year it was installed?
Reply
I have a SD60... sand filter.... getting sand in pool. How can i tell if lateral is broken or cracked. How many laterals do i need , can i get the o ring between the multiport valve and the filter. How man bags of sand do i need to change the sand.? Do i have to relieve pressure off the filter before i open the top or the drain plug?
thanks in advance
Reply