Part # 4663-37
Dimensions 17.5" L x 17.5" W x 17.5" D
Alternate Part #'s CCX1500C, 17-150-1292
INYO # 4663-37 WATERWAY # CCX1500C
************************************************
GENERAL DESCRIPTION: XSTREAM CARTRIDGE FILTER, GRAY FILTER BODY TOP HALF THIS IS FOR THE 150 SQ FT MODEL THE BODY IS ROUND WITH SLIGHTLY ROUND SOUNDS. THIS TAPERS A LITTLE TOWARD THE SLIGHTLY ROUNDED TOP.
************************************************
BASIC SPECS: COLOR: LIGHT GRAY BODY, BLACK LOCK RING DIAMETER: 16-3/8" (MAXIMUM DIAMETER AT FLANGE WHERE LOCK RING FITS) DIAMETER: 16" (DIAMETER AT THE BOTTOM OF THE LID) HEIGHT: 15-3/4" (TO THE TOP OF THE LID) HEIGHT: 17" (TO THE TOP OF THE AIR RELIEF VALVE)
************************************************
MARKINGS: THE LID HAS A ROUND PIECE IN THE CENTER OF THE TOP WITH THE HAYWARD "H" LOGO.
************************************************
INCLUDES: FILTER BODY FILTER LOCK RING AIR RELIEF ASSEMBLY WITH SAFETY CLIPS GAUGE ADAPTOR WITH SAFETY CLIP 1/4" BACK MOUNT PRESSURE GAUGE WITH O-RING
Will it fit the lower hayward ccx1000B?
Reply
Hi Karen, no this lid will not fit the ccx1000B. You will require this Hayward CCX1000 Lid. Unfortunately, we are currently out of stock on that item, I would suggest clicking the “Notify When in Stock Icon” located at the upper right corner of that page to be notified by email when we receive more stock of that item.
Reply
would this product remedy my problem of not being able to fully close the lid on the lower half?
Reply
Hello, there may be a few reasons that can cause this issue. It may be the lid, the o ring, an expanded base, or even damaged threads. The unit may need to be inspected by a licensed technician to pinpoint it if you aren't able to locate the source.
Reply
We have a Swim pro Voyager model #SW1000Z4.. Where can i get the large o ring for the lid ?
Reply
The SwimPro Voyager housing gasket is the Body O-ring - CCX1000G
Reply
We have a Swimpro Voyager model #SW1000Z4, would this filter lid and lock fit this model?
Reply
Hi. The Filter Lid w/Lock Ring CCX1000C is the replacement for the SW1000Z4 based on that model #.
Reply
I have a Hayward Model # SW15044MFTTL Voyager SwimPro (Filter spec label has CC1500, CC1750 and CC2000). I'm guessing mine is the CC1500 based on model number. Does your Item No. CCX1000D fit this filter housing? And if so, do you have it in stock and how soon can it be shipped? Do the Hayward "Xstream" and my Hayward Voyager SwimPro have common parts?
Reply
Hi, David. The Xstream and Voyager SwimPro share the same parts. The Lock Ring - CCX1000D will fit the SW15044MFTTL filter. It is a stock item and will ship either the same day or the next business day.
Reply
Hi, I recently purchased Xtreme filer CC15080X5S a month ago, but lately it seem like the PSI stay at 18-20 no matter how I clean the cartridge that cause not enough flowing water kick in to my heater. How can I solve this problem ? I also noticed the top air pressure gauge glass has water in it, will that be causing the pressure problem ? thanks.
Reply
Hi Kenny, Try running the system without the cartridge in it and record the pressure reading. If the pressure is significantly lower then you will need to thoroughly clean out the filter. Water inside the pressure gauge is a sign that the pressure gauge is bad.
Reply
The Most Recent Reviews
0 1
(3 out of 5 stars) Filter Lid
Reviewed By: Robert S. from Clarksville, Tn ()
Pros: Fast service
Cons: assembly needed
Excellent service and easy to order, only problem was it came in two pieces, and to engage the locking ring you have to use a rubber mallet. I would think it would come all together ? I also did get the rubber gasket either (I took it off the old one). But other than that its working just fine. I'll do busy again with INYOPOOLS.
Was this review helpful to you?
(5 out of 5 stars) Filter Housing
Reviewed By: Christopher S. from Collinsville, Il. ()
The product was in stock, delivered on time and in excellent condition.
Was this review helpful to you?