$18.54

Qty:

Details

Top

Part # 5020-086

Manufacturer Code R0445500

Alternate Part #'s AS-201, AS201, PS-4231, R0445500, 35-423-1021, APCAS201, PSR201, USSPS201

Product Description

Pump Shaft Seal OEM 3/4" - R0445500

Jandy Stealth SHPF & SHPM Series Pump Note:

  • Used with serial number prior to P08FF0001. 

Polaris PB4-60 Booster Pump

  • Used with serial number after PB120111001 or  beginning AVEH050100

How To Select the Shaft Seal for a Jandy Stealth SHPF & SHPM Pump

Click Here if you would like to purchase the heavy-duty shaft seal. The heavy-duty shaft seal is recommended for saltwater pools but can be used in any application. 

Top

?     Asked on 1/25/2012by Guest

How do I change the shaft seal on my pool pump?
 Reply

A  Answered on 1/25/2012 by InyoPools Product Specialist Patrick P.

Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
 Reply


?     Asked on 1/8/2015by ronny

How do I tell the difference between old style and new style shaft seal
 Reply

A  Answered on 1/8/2015 by InyoPools Product Specialist Alex V.

Ronny, The best way to tell is by the serial number listed on the pump body (housing). The old style seal is used with serial #s prior to P08FF0001. If you have the above serial # or later, you would use the new style shaft seal.
 Reply


?     Asked on 4/7/2015by chris

My Jandy Stealth SHPM 2.0 serial # is L07FD3409. What seal do I need
 Reply

A  Answered on 4/7/2015 by InyoPools Product Specialist Brian M.

The seal that would be needed for a Jandy Stealth SHPH ( 2006-current ) would be part number 5020-087. Here is the parts diagram for the Jandy Stealth SHPM
 Reply


?     Asked on 4/22/2015by Lauren

Where should the serial number be on a Jandy PlusHP? Would it be a sticker that might have gone missing or is there a more permanent number I can get off it somewhere?
 Reply

A  Answered on 4/22/2015 by InyoPools Product Specialist Andy O.

Lauren, the serial number will be on the wet end of the pump near the pump basket. It is usally on a sticker or metal label.
 Reply


?     Asked on 4/29/2015by Mike

I have the Jandy Stealth SHPF 2.0-2 Ser# MO7FG1155. Do I need the old or new style shaft seal to go with my new B984 I just ordered from you?
 Reply

A  Answered on 4/29/2015 by InyoPools Product Specialist Patrick P.

Hi Mike, This would be the correct seal for your Jandy Stealth Pump as this seal is used on Stealth Pumps with Serial #'s of P08FF0001 and earlier.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Socket Set, Adjustable Wrench

Shaft seal was leaking

Written on 9/23/2023 by Guest

I followed the inyo pools video for this. I disconnected power to the system, disconnected the hoses, and removed the front cover of the impeller. Then I removed the shaft cover on the back of the motor so I could lock it out with a wrench. I spun the impeller off, which allowed access to the shaft seal. I still needed to remove the hoisting from the motor so I could press out half of the seal. I applied a small amount of lubricant to the seal prior to pressing it in and that allowed it to seat easily without binding up. Reassembly was opposite of disassembly.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

Replaced filter pump motor

Written on 7/12/2018 by Guest

This only involves replacing shaft seal. Very easy. Remove existing seal and replace exactly the same order. Do not be cheap. Replace the seal when you change the motor. I saw how much wear there was on the old one.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
12 Rating
5 star:
 
(12)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews