$341.83

Qty:

By Paramount


Details

Top

Part # 3227-02

Manufacturer Code 004-302-4408-00

Dimensions 8" L x 8" W x 8" D

Alternate Part #'s 004-302-4408-00, 004302440800, 87-214-1044, PMT-201-604, PMT004302440800

Product Description

Paramount Water Valve 6 Port Module for In-Floor Pool Cleaners (Includes O-Ring) - 004-302-4408-00

This module needs to be replaced if the valve sticks on the same cycle or if more than one zone in the pool is up when operating. 

Top

?     Asked on 4/3/2016by ed buffman

does this part replace old part # 06099c six port paramount valve set?
 Reply

A  Answered on 4/4/2016 by InyoPools Product Specialist Lennox H.

Hi Ed, I was not able to cross reference p/n 06099C directly to this part but this will replace the Paramount Six Port water valve.
 Reply


?     Asked on 7/10/2016by RIck

Is this a factory original part and brand new?
 Reply

A  Answered on 7/11/2016 by InyoPools Product Specialist Alan M.

This is a Paramount manufactured part and is not used or refurbished. This part is new.
 Reply


?     Asked on 10/30/2016by Richard Trottier

I had this part replaced by my pool company in sept 2014 this unit does not work properly as one port is constantly on therefore not allowing proper pressure to the other ports when they open up I have a picture of the manufactured date 0f sept 2013 the serial # is 130090177 I think this part should last more than 2 years as it is not cheap What it the warrantee on this? and who do I bring it back to? Thanks Richard Trottier
 Reply

A  Answered on 10/31/2016 by InyoPools Product Specialist Stacey M.

Hello Richard, You can contact Paramount directly to see if they offer a certain type of warranty on parts and or could possibly have a tech come out to service the unit. Paramount Pool & Spa Systems295 East Corporate Place, Suite 100Chandler, AZ 85225 Toll Free: 1.800.621.5886 Phone: 480.893.7607 Fax: 480.753.3397 E-mail: paramount@1paramount.com
 Reply


?     Asked on 5/5/2017by Ernie

I am concerned about purchasing this 6 port module. Looking at the pictures the bottom of it looks different than my unit. My unit is about 7 years old. I took all the information off the module and it matches. I can send you a picture of the bottom if you would like. Do I need to worry? Please help. Thank You, Ernie Weber
 Reply

A  Answered on 5/5/2017 by InyoPools Product Specialist Lennox H.

Hi, Ernie. If the numbers match then this is the correct replacement. You can send photos by replying to this email so that we can confirm.
 Reply


?     Asked on 9/4/2017by RON

my paramount water valve is making a lot of noise. Two questions: any idea what is causing the noise? The mfg # on top of the unit is 0013004800xx, apparently 6 port module. approx. 10 years old ... can you identify replacement parts for this model and costs?
 Reply

A  Answered on 9/6/2017 by InyoPools Product Specialist Lennox H.

Hi, Ron. A loose gear or part could be the cause of the noise. This 6-Port Module - 004-302-4408-00 is the correct replacement for your water valve. 
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

1     1

Some of the water jets wouldn't close. This reduced the the pressure to the other jets and they couldn't blow the dirt to the drain.

Written on 8/25/2017 by Mark G.

Remove the cover and pick up the old water valve unit. Replace the old unit with the new unit. Be sure to rotate it as you lower it into the cavity to engage the tabs. Once it is engaged and lowered into place, replace the gasket on the cover. Replace the cover and tighten the locking ring. Easy job!

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
6 Rating
5 star:
 
(6)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews