By Zodiac



Part # 4580-133

Manufacturer Code R0465400

Alternate Part #'s R0465400, 14-295-1063, JDYR0465400, TLD-051-5077

Product Description

CV Filter Tank Bottom Assembly - R0465400


?     Asked on 9/2/2015by William

We have a very small pin hole in the bottom tank assembly. Can this be repaired?

A  Answered on 9/2/2015 by InyoPools Product Specialist Brian M.

There is nothing I am aware of that will fix this problem. I have heard of people trying many different methods - fiberglass patch, 2 part apoxy and others. They are more of a stop gap fix. The pressure in the tank will eventually undo whatever fix method they have all tried.

?     Asked on 10/26/2021by Sam

Hi, will this fit the bottom of the Jandy CV 580 filter?

A  Answered on 10/27/2021 by InyoPools Product Specialist Rich N.

Hi Sam, yes, the CV and CL Filter Tank Bottom Assembly - R0465400 will fit your Jandy CV580 filter perfectly.  

?     Asked on 7/8/2022by Chad Robbins

Will this work for the CV460? Thanks!

A  Answered on 7/8/2022 by InyoPools Product Specialist Craig C.

Hello Chad.  The CV and CL Filter Tank Bottom Assembly - R0465400 is compatible with the Jandy Cartridge Filter CV460.   The Tank Bottom Assembly R0465400 is compatible with both the Jandy CV and CL cartridge Filter Series.  The Jandy CV Series Filters have opposite side Inlet/Outlet ports for improved hydraulics over the previous CL model.  The CL Series has same side Inlet/Outlet ports.

?     Asked on 9/8/2022by Mark W Campbell

Will this bottom fit a Jandy CL340 filter? Are the inlet and outlet spacings the same? The center to center distance on my Jandy CL340 is approximately 8.5".

A  Answered on 9/8/2022 by InyoPools Product Specialist Craig C.

Hello Mark.  The CV and CL Filter Tank Bottom Assembly - R0465400 is a compatible filter tank bottom assembly for the Jandy CL340 Filter.  According to Jandy CL340 Product Specifications, the distance between the Inlet/Outlet Ports is 8 inches.  The Filter Tank Bottom Assembly R0465400 is manufactured by Jandy/Zodiac to the original OEM CL340 Product Specifications.

?     Asked on 10/3/2022by Inyo Visitor

does this part replace the Jandy CV460

A  Answered on 10/3/2022 by InyoPools Product Specialist Hector F.

Hello, yes this tank bottom assembly is compatible with the Jandy CV460 model filter. I have also emailed you an quote that you can convert to an order if you would like. 


Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

1     0

I found the lower section of my filter pump had several pinhole leaks and discovered a defect in the originally installed unit.

Written on 5/1/2023 by Guest

I was able to find the exact replacement of just the lower tank body. Most vendors only sold both pieces together and being able to order just the lower half saved hundreds of dollars. I easily disconnected the old unit and the parts included with the new tank bottom matched perfectly. I needed only a wrench to tighten on of the connections and the rest was all done by hand tightening. Worked perfectly.

Were these instructions helpful? 


Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
4 star:
3 star:
2 star:
1 star: