Model # 01050940
Alternate Part #'s KTC-45-501
Perform-Max™ Feeders for Above Ground and In Ground Pools
More Performance!
Perform-Max™ Feeders bring you the best in bulk chlorine or bromine feeding. No other bulk feeder offers erosion technology with exact metering capabilities. The Perform-Max™ Feeders are the only feeders with the patented Performance Valve™ that performs on cue, responding accurately to each adjustment in its wide range of settings.
More Technology!
The Performance Valve allows water to continuously erode only the bottom layer of chemical. When a small area of chemical is eroded, you can maintain output much easier than when an entire chemical supply gets wet (like in soaker feeders).
More Options!
Perform-Max™ Feeders can be used with chlorine or bromine - pucks, tablets or sticks - holding from 7 to 10 pounds of chemical. With 3 models to choose from, ther is a Perform-Max™ for you whether your pool is 10,000 or 50,000 gallons.
No More Worries!
Perform-Max™ Feeders maintain proper residual for any size pool, any weather conditions, any number of swimmers. The Performance Valve's wide range of settings gives you more control without over chlorinating.
Which Perform-Max™ Model is Right for You?
I have a perform-Max 940 In-line brominator that has a slow leak around the dial control. Is there an O-ring in there? Is there a way to rebuild that area without replacing the whole thing?
Hi Michael, Yes there is an o-ring behind the dial valve. You will need this Perform Max 940 Dial O-Ring
Reply
Can someone confirm the size dimensions of this product? Your website shows top width of the canister at 7.5 inches and the bottom width of the canister at 7 inches. Then the height (which is far greater than the width) is also listed at 7 inches. I am looking for a replacement feeder and my current canister is 17/17.5 inches tall. Is this a typo on your website (7 inches instead of 17 as it should be)? Let me know. Thanks
Reply
My pool guy overtightened the air bleeder screw on top and broke it off! Can I purchase the air bleeder valves?
Reply
Hi, Rick. The replacement knob can be purchased, it is listed on the King Perform-Max Feeders Parts Page.
Reply
Need 1 (One) Upper lid inside gasket for the Perform Max Pool Sanitizer. Have bought from you before. thanks. I will pay with Paypal . Fred.
Reply
Hi, Fred. The replacement Lid O-ring - 01-22-9926 (Current), 01-22-9426 (Pre-'91) are available based on the age of your unit.
Reply
Can I purchase the plastic (doughnut-shaped ring with handle) that helps to tighten or loosen the lid on the in-line feeder?
Reply
Yes the Tool, Cap/control Dial (01-22-8870) PART # 9221-18 would be whats needed.
Reply
Can this model be used in-line in an above ground pool?
Reply
Hi, Dave. If you have a large above ground pool, you can use this model. You will have to follow the installation instructions available in the Perform-Max 940 Owners Manual.
Reply
Is this a generic model?
Reply
Hello Larry, this is not generic, just a different brand, King Technologies Perform-Max™ Feeders bring you the best in bulk chlorine or bromine feeding. No other bulk feeder offers erosion technology with exact metering capabilities. The Perform-Max™ Feeders are the only feeders with the patented Performance Valve™ that performs on cue, responding accurately to each adjustment in its wide range of settings. so depending on your pools size you can see if they are the right model for you.
Reply
Is there a replacement lid for sani king performax 910 in line. Serial#407244
Reply
Hi Deb, The Cap w/ O-ring - 01-22-1418 is the replacement lid for the Sani King Performax 910 In-Line feeder.
Reply
Iis there a water in and water out side to the 940 inline pool sanitzer?
Reply
Yes if you are looking at this chlorinator from the front the inlet would be on the left and the outlet would be on the right. Also the 940 Perform-Max Owner's Manual does a good job showing how to install this chlorinator.
Reply
1 to 2 hrs
Screwdriver, Socket Set, Adjustable Wrench
1. The old unit was a Perform-Max 940 IG Inline feeder 10 pound capacity
2. Needed the same model to avoid having to make plumbing modifications for the new unit.
3. ordered the new unit from INYO Pools. It arrived in two days
4. Installed the unit with no plumbing changes.
5. New unit works like a dream.
The Most Helpful Review
1 0
(4 out of 5 stars) Perform-Max 940
Reviewed By: Pool Man from Bucks County PA ()
Unit was very easy to install as a replacement for a New Water 100 cycler. All that was required was a 2"/1.5" adapter for the existing 1.5" union. The output was very easy to setup and pool chlorine levels are very steady. Cannot compare to the Hayward models.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Sturdy, dependable product.
Reviewed By: Inyo Customer ()
Adjustability of chlorine flow is a great feature. It allow you to keep the chlorine in balance autumatically.
Was this review helpful to you?