Color Splash LED 2G Spa Lamp, 120V - LPL70301102

Model # LPL70301102

By J & J Electronics

  5 Average  

Details

Top

Model # LPL70301102

Warranty 5-year

Alternate Part #'s ELELPL-S2-RGB-120, JJE-30-7032

Product Description

COLOR SPLASH™ 2G REPLACEMENT MULTI-COLOR LED IN-GROUND POOL & SPA LIGHTS

Color Splash 2G Replacement Multi-Color LED In-Ground Pool & Spa Lights offer seven solid colors, multiple color blends and five light shows that can instantly transform the consumer’s pool and spa area into a color-rich paradise. They use an Edison base, so they install easily into the consumer’s existing fixture in just minutes. Plus, Color Splash’s LED technology makes them the most energy efficient and longest lasting of their kind on the market.

COLOR SPLASH 2G ADVANTAGES:

  • LED technology. Energy efficient, 35.3 and 12 watt lights reduce consumer's electric bill immediately.
  • Edison base light.Uses same light base as pool lights for quick and easy replacement.
  • Synchronizing. Multiple lights operate in unison to harmonize your backyard lighting.
  • Proprietary cooling system. Maximizes lifespan of up to 100,000 hours.
  • 5-year warranty. Lasting quality you can rely on for years.

COMPATIBILITY:

  • Hayward Astrolite II
  • Pentair SpaBrite Series

Product Specifications

Pool / Spa Type:
Spa
Volts:
120 V
Color:
Color Changing
Top

?     Asked on 6/27/2020 by Joe

Have a Pentair 77168100 fixture 120v 250 watt fixture. Any led retro kits? If not factory bulb, gasket and blue cover info please. Thanks.

 Reply

A  Answered on 11/10/2020 by InyoPools Product Specialist Hector F.

Hi Joe, unfortunately, there is not an LED bulb that can be used with your Pentair Aqualight model 77168100 light however you can replace the entire fixture with the Pentair Spabrite model 78106100 and use the J & J Colorsplash LED bulb part number LPL-S2-RGB-120. You can also use the Pentair Intellibrite LED complete light model 640121.  
 Reply


?     Asked on 12/17/2016 by

will this fit on Pentair T4 E11 light fixture. if not, please suggest an LED bulb which will fit! Thanks.
 Reply

A  Answered on 12/19/2016 by InyoPools Product Specialist Lennox H.

Hi. This bulb is not compatible with a Pentair T4 E11 light fixture, there is not a compatible LED bulb for that style fixture.
 Reply


?     Asked on 3/6/2016 by alan

How do you change colors when installed? Will it stay solid white?
 Reply

A  Answered on 3/8/2016 by InyoPools Product Specialist Andy O.

Hello Alan, These lights are controlled by turning them on and off. That is how you will cycle through the light shows and colors. Once you reach your desired color, in this case Arctic White, you turn the switch off for 8 seconds. This can be clarified in the installation and operation manual on page 5.
 Reply


?     Asked on 11/16/2015 by Dean

I'm looking for a white, non-color changing jacuzzi/spa LED lamp to replace existing R40 lamps.
 Reply

A  Answered on 11/16/2015 by InyoPools Product Specialist Joe S.

There is no LED currently that fits this model. You can go with a new Hayward Universal color logic
 Reply


?     Asked on 1/20/2012 by Guest

For a color-changing LED light, how do I switch between the different settings with just a standard light switch?
 Reply

A  Answered on 1/20/2012 by InyoPools Product Specialist Patrick P.

The LED lights are designed to move to the next programmed setting each time you turn the switch on and off.  This will toggle through the different color settings and shows.
 Reply


?     Asked on 7/5/2010 by Guest

What is the difference between the G3 and the G2 LED Light?
 Reply

A  Answered on 7/5/2010 by InyoPools Product Specialist Patrick P.

The G3 uses newer technology which gives you brighter light output than the G2, also the older technology on the G2 let's you see individual rays of light where the new technology on the G3 has a much smoother light output. You may view or purchase either light here  >http://www.inyopools.com/lights_jjelectronics.aspx
 Reply


?     Asked on 2/2/2009 by Guest

I have 2G lights in my pool and want to put a 3G light in my spa. Will the 2G and 3G versions synchronize with one another?
 Reply

A  Answered on 2/2/2009 by InyoPools Product Specialist Patrick P.

According to the manufacturer, the 2G and 3G versions will not synchronize with one another.  To have the lights on the same color rotation, you would need to have the same version in both your pool and spa.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)