$230.99
Part # JDPCBSCR
Your Source for Swimming Pool & Spa Parts With 40,000 Parts in Stock - INYOpools.com
I am looking for a power pcb for a compu pool cpsc 24. What is the part # I am looking for I see you have part # jdpcbscr is this the correct one ? Thanks for the help.
Reply
Hello Jan, From our schematics it appears the correct PCB would be the JDPCBSCR. But I would still recommend contacting compupool at 1-888-989-7258 to make sure that this is the correct board, sometimes it may be the right board just a wrong revision that will not work with your unit.
Reply
Does this a complete board?
Reply
Yes, the JDPCBSCR comes 100% complete. The only thing that will have to be done is to solder the transformer and cell cord wires to the board and screw it down to the base.
Reply
My generator shows no flow or low salt.it's about 2*3 yrs old .The leslies say's the salt is 3200 and the temp.say's 69 deg.everything else works as it did last season.I checked the connections and all are tight.The cell is spotless.from what I'm reading it sounds as if has a bad circuit boar d? thanks for your help
Reply
Hi George, Yes from everything you are explaining it does sound like a bad circuit board. We have a guide here on How to Replace a Compupool CPSC Circuit board which may be of help to you. We also have a guide on How to Isolate and Correct Compupool Problems.
Reply
my salt system is showing water fault or no flow and i have already replaced the cell. which board do i need to fix this problem? the display or the power. thanks!
Reply
Hi Tyler, The Power PCB Board would be the board you would need to replace.
Reply
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Exactly what we needed for our Compupool main control meter.
Was this review helpful to you?