By Wilbar
Part # 22752
Top Rail 7" 51-15/16" (Single)
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
Click here to submit the information requested below.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
Less than 1 hr
Screwdriver, Nut Drivers
I had 4 rails that were degrading from rust. I popped of the caps, 2 screws on either side, then 1 more screw under the cover. Each rail had 2 self tapping screws on either end. Swapped all 4 withing an hour. These covers were a half inch longer than existing, which I knew when I ordered. My exact fit were back ordered. Didn't matter though, perfect width and color match.
More than 8 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Battery v powered drill
Removed plastic divider between each rail by unscrewing the divider. Then remove two screws holding down rails. Repeated until all new,steel rails replaced. Made the top of pool look like new.