Part # 22797-Pack4
Alternate Part #'s 18568, 22797
Top Rail 8.5” Resin 38 1/16” (4 pack)
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
Looking for top rails for my 18 x 33 oval above ground pool. Not sure of the brand. The top connector has a Part Number of 361X18; the rails are white metal and the connectors are white plastic.. The shortest rails measure 8" wide and 37" long..
Pool is approx 10 years old; oval - 18' x 33' x 4'
You have a Swim'N Play pool. Unfortunately, we do not carry parts that brand and our parts are not interchangeable.
Hi Gang! I purchased a Sharkline Silhouette 18'33' Oval pool in 2002. The top rails are all rusting and need replacing (I have Monkey Tape on bottom of them to help keep metal particles from falling into the pool :). I would most likely replace the top caps as well. I'm attaching the original brochure along with some pool pics. Please let me know if you can help me with these parts. Thank you!
The flier is the Sharkline Silhouette model but your pool looks more like the Sharkline Escalade model. Could you send us a picture of the front of the cap to confirm?
Now that you say that the name rings a bell :) Here are a few close ups - let me know if these help at all- thanks again
Count the number of rails on your pool to verify, but the 18'x33' Escalade typically has a total of 22 top rails. 12 top rails measure 51-15/16" and the part number for that one is 12757. The other 10 rails measure 41-1/4" and the part number is 16548.
Yes you are correct- there are 22 total top rails. I also want to replace the top caps (18- picture attached) and the 4 for the deck caps (picture attached). Do you have part numbers for them? thanks
The deck cap is not a part that was from the original pool. We do not carry that part. We do carry the original caps for the curved ends and straight sides. The curved side cap is part number 14440 and the pool would require 12. The straight side cap is part number 14441 and the pool requires 8. The back half of the cap is part number 14442 and the pool requires 22. We have emailed you a quote for all of these parts.