Part # 29889
NEED MORE THAN 1 Resin BOTTOM RAIL?
Bottom Rail 56-1/16" (Single)
How to Measure the Length of a Bottom Rail
1) Use a flexible measuring tape. We found that a tailoring tape worked best.
2) Measure from one end, along the outside bend, to the opposite end.
Above ground pool parts are not universal and can be difficult to identify. Inyo wants to make every effort that your order meets your requirements. If you are not confident that you have chosen the right parts - Please send the following information that is requested below. Inyo will forward to the information provided to the manufacturer to see if they can determine if the pool is one of their models.
Click here to submit the information requested below.
* Size of the pool & approximate age of the pool?
* Image of the pool wall.
* Image of the upright
* Image of the top rail connection to the upright.
* Name & age of the pool (if known)
1 to 2 hrs
Screwdriver, Pliers
I first had to take measurements and go thru you parts to find something close to what I needed since you were out of the parts. I then took a chance measured again and ordered when the parts came I was very happy they looked like they would fit so I tried one by taking the top rails off. Then the old rusted stabilizers and putting the new resin ones they fit perfect I changed them all. All that was left was getting the rusted metal from the old stabilizers out of the pool. I used a magnet on a string to get the metal all out then vacuumed good.
Thank you Inyopools It all worked out and now we are able to use the pool. Doug Vansise
