PureColors LED Bulb & Pentair Amerlite Pool Light Fixture Kit 120V 50' Cord - PL5831

Part # PL5831

By PureLine

  5 Average  

Details

Top

Part # PL5831

Warranty 2 Year Warranty LED Bulb, 1 Year Warranty Light Fixture

Product Description



PENTAIR AMERLITE POOL LIGHT FIXTURE WITH PURECOLORS LED BULB KIT

Take advantage of this great pairing of the Pentair Amerlite Light Fixture and the PureLine PureColors LED bulb. This kit contains the Pentair Amerlite Pool Light Fixture and a PureColors LED Bulb. Simply remove the glass lens from the Amerlite light fixture and screw in the included PureColors LED Bulb. Replace the glass lens and install your new LED pool light fixture in your pool. Watch our Video on How to Install a LED Pool Bulb which outlines the bulb replacement process.

COLOR CHANGING LED POOL & SPA LIGHTS

PureColors LED pool & spa bulbs offer seven solid colors, and nine light shows that can instantly transform your pool area into a color-rich paradise. The PureColors bulb uses an Edison screw in base, so the LED bulb is easily replaced if it ever burns out. Plus, LED technology makes them the most energy efficient and longest lasting light on the market.

ADVANTAGES:

  • LED technology
  • 80% Operational Cost Savings
  • Standard screw in light base for quick & easy replacement
  • Synchronize multiple lights to operate in unison
  • 50,000 hours Lifespan
  • 2-year warranty PureColors LED Bulb
  • 1-year warranty on Pentair Amerlite Fixture
  • 441- LED's

COMPATIBILITY:

  • Hayward Astrolite SP058 Series
  • Pentair Amerlite 784 Series
  • Note: Not compatible with Swimquip Light Fixtures or Hayward SP0540 series.

Product Specifications

Volts:
120 V
Cord Length:
50 ft.
Pool / Spa Type:
Pool
Bulb Type:
LED
Face Ring:
Stainless Steel
Remote Included:
No
Controller:
Light Switch
Watts:
35 W
Lumens:
White: 2,600 Colors: 850
Incandescent Equivalent:
300 Watt
Top

?     Asked on 4/24/2020by Brian Jacobs

Does the light have a gradual change? Or does it not flow well? I saw a video where the pool went about black everytime the light changed colors. And does it matter if this bulb goes into the 300w, 400w, or 500w Amerlite?
 Reply

A  Answered on 12/22/2020 by InyoPools Product Specialist Hector F.

Hi Brian, this light is no longer available however yes this model and similar LED light fixtures models can gradually change colors. 
 Reply


?     Asked on 4/20/2020by Susana

Is this LED bulb and pool light fixture kit a good replacement for a Pentair Spectrum Amerilite (SAM) Light? Also, is there a remote control I can buy to control the pool light and change the light settings?
 Reply

A  Answered on 4/20/2020 by InyoPools Product Specialist Patrick P.

Hi Susana, Yes this LED bulb and pool light fixture would be a good replacement for a Pentair Spectrum Amerilite (SAM) Light. There is not a remote kit for this light.
 Reply


?     Asked on 4/18/2020by Richard Lester

I'm looking to replace a Jandy CPHVLEDS100. My current inoperative light is 120v. Do you offer the PureColors kit with a 12volt bulb?
 Reply

A  Answered on 12/22/2020 by InyoPools Product Specialist Hector F.

Hi Richard, unfortunately, we do not carry an LED light bulb replacement for the Jandy Watercolors series pool lights however if you can confirm your light niche model, and if it listed as compatible on this data sheet then you can use a J & J Colorsplash LED pool light
 Reply


?     Asked on 4/8/2020by Lou

Hi, does this pool light fit the Hayward SP0607U niche for vinyl lined pools?
 Reply

A  Answered on 4/9/2020 by InyoPools Product Specialist Lennox H.

Hi, Lou. Yes, this Amerlite will fit that Hayward Niche. 
 Reply


?     Asked on 3/16/2020by dan

can you control this light through an internet controlled light switch through Alexa or Samsung Smart Things controller?
 Reply

A  Answered on 3/17/2020 by InyoPools Product Specialist Lennox H.

Hi, Dan. Yes, you can only by turning the switch On/Off. 
 Reply


?     Asked on 3/7/2020by john Bynum

will this fit a sp580
 Reply

A  Answered on 3/7/2020 by InyoPools Product Specialist Patrick P.

Yes this light will fit in the same niche as the Hayward SP0580. This is a 120V light so you will need to double-check that your light is 120V and not 12V.
 Reply


?     Asked on 2/14/2020by Phil Berger

How do you make it change colors?
 Reply

A  Answered on 2/18/2020 by InyoPools Product Specialist Lennox H.

Hi, Phil. Toggling the light switch on/off will change the color. 
 Reply


?     Asked on 2/10/2020by Matt Butcher

Hello, will this fit/replace an Anthony Pool Light? If there were multiple models of Anthony lights, any way to tell which model I have without removing the light?
 Reply

A  Answered on 2/11/2020 by InyoPools Product Specialist Lennox H.

Hi, Matt. The model of the fixture, niche and or niche dimensions are needed in order to confirm compatibility. 
 Reply


?     Asked on 1/23/2020by Steve

CAN YOU DETERMINE WHAT IS THE CORRECT REPLACEMENT OF A ONE TIME PURCHASE AND INSTALLATION. I need the LED Color REPLACEMENT BULB OR THE WHOLE LIGHT ASSEMBLY IF NEEDED, WITH THE CABLE, SEAL, NEW SCREW. Have an old 60"s pool and light, @ 10" American Products wet niche, Fresh water Model R 400 BC, 120V AGE -400 Type G-30. Use with CN-5 Fixture Housing.
 Reply

A  Answered on 1/29/2020 by InyoPools Product Specialist Lennox H.

Hi, Steve. This LED Light Fixture Kit can be used as a replacement for your existing pool light fixture. 
 Reply


?     Asked on 12/30/2019by DAVID DEMOSS

Can I use this to replace a Hayward Colorlogic light?
 Reply

A  Answered on 12/31/2019 by InyoPools Product Specialist Lennox H.

Hi, David. Yes, you can based on the niche you have. A Universal Light Ring Adapter might be needed. 
 Reply


?     Asked on 11/21/2019by bernd rohde

Can is use this as a replacement for my CPHVLEDS100 and will it work with my Jandy Aquarlink controls.
 Reply

A  Answered on 11/21/2019 by InyoPools Product Specialist Jessica C.

Hi, Bernd. The replacement you need for your current CPHVLEDS100 is the PureColors LED Bulb & Pentair Amerlite Pool Light Fixture Kit 120V 100' Cord - PL5832. This unit is not compatible with Jandy's proprietary lighting feature on the Aqualink controller. It will have to be wired to an Aux relay in order to control this fixture. 
 Reply


?     Asked on 10/19/2019by Peter C Anderegg

I'm replacing a Pentair integrated LED pool light listed as 500w. Will the PL5831, listed as 350w equivalent give me enough light in our 40x20 pool? There is only one wet niche for a light.
 Reply

A  Answered on 10/23/2019 by InyoPools Product Specialist Lennox H.

Hi, Peter. Most customers who have made the switch are satisfied. 
 Reply


?     Asked on 10/13/2019by Scott Collister

Our very old pool light fixture does not have any manufacturer markings. The light fixture is 6 in. deep, 7 7/8 in. in diameter and the lens retention ring is 10 5/16 in. in diameter. Please advise if the PL5831 system with the Amerlite Pool Light Fixture kit is my only choice based on the dimensions of the old light fixture.
 Reply

A  Answered on 10/14/2019 by InyoPools Product Specialist Lennox H.

Hi, Scott. Without knowing the niche model or manufacturer we're unable to confirm if this fixture will fit without using a Universal Light Ring Adapter.  
 Reply

  • Commented on 10/15/2019 by Product Owner

    Please advise if these photos allow you to identify the old light fixture I described above. Our pool was constructed in 1991. I can also measure the niche if necessary to confirm what light fixture would fit. I assume the niche manufacturer data plate is on the back side of the niche, outside of the pool shell. Thank You.

     Reply

    • Commented on 10/16/2019 by InyoPools Product Specialist Lennox H.

      Scott, The fixture you have appears to be the Hayward Astrolite. This fixture will fit into the same niche. 
       Reply


?     Asked on 10/4/2019by Michael S

We bought house with salt water chlorination pool that has Hayward everything, including their Aqualogic Control panel. Will this light work with Hayward control panel, or do I need to by a separate control for these lights?
 Reply

A  Answered on 10/11/2019 by InyoPools Product Specialist Lennox H.

Hi, Michael S. Yes, this fixture can be controlled by the AquaLogic Controller. 
 Reply


?     Asked on 9/12/2019by Mike

Si this light compatible with a Jandy Watercolors Light 120V CPHVRGBWS50
 Reply

A  Answered on 9/12/2019 by InyoPools Product Specialist Hector F.

Unfortunately, this light is not compatible with that Jandy Watercolors series. You would need to go with the same series which we unfortunately no longer carry. 
 Reply


?     Asked on 9/10/2019by Tina Bowers

What does the light switch look like for this unit? Is a transformer required? What niche would be needed to install on a vinyl pool?
 Reply

A  Answered on 9/12/2019 by InyoPools Product Specialist Hector F.

The switch used for this light will be just a standard light switch, a transformer will not be needed and the part number for the vinyl niche is part number 78232500.  
 Reply


?     Asked on 8/29/2019by VERNON

Will this light fit niche model numbers - PLNICLRG,PLNICVFLR?

 Reply

A  Answered on 8/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Vernon. This LED Light Fixture Kit can be used as a replacement. 
 Reply


?     Asked on 8/11/2019by Chris Hansell

Can 'i use this in a Hayward SP0600U?
 Reply

A  Answered on 8/14/2019 by InyoPools Product Specialist Michelle B.

Hello,Yes, you would be able to use that niche for the pure colors.
 Reply


?     Asked on 7/29/2019by Will

Will this fit Pentair niche 79206700?
 Reply

A  Answered on 7/29/2019 by InyoPools Product Specialist Matt S.

Yes, the PureColors LED Pool Light is compatible with the Large Plastic Niche, 1" Top Hub, Concrete - 79206700
 Reply


?     Asked on 7/28/2019by Will Schoggen

Does this fit the Pentair niche 79206700 or 79206780. Had my son writing on the pool deck not sure of the second to last number. Thanks
 Reply

A  Answered on 10/8/2019 by InyoPools Product Specialist Hector F.

Yes, this light will work with the model 79206700 Pentair niche and the second one did not come up in our system. 
 Reply


?     Asked on 7/26/2019by Will

Does the bulb emit white light? Glad this is an option over the other options!!! Thanks
 Reply

A  Answered on 7/26/2019 by InyoPools Product Specialist Lennox H.

Hi, Will. Yes, this LED fixture kit does have an Arctic White option. 
 Reply


?     Asked on 7/26/2019by Linda Adams

Can I get this without the color option?
 Reply

A  Answered on 7/26/2019 by InyoPools Product Specialist Lennox H.

Hi, Linda. We do not have a kit available with White LED. You can purchase P/N 78428100 and PL5849 to make up a kit.
 Reply


?     Asked on 7/23/2019by Inyo Visitor

Hello, I have an old SP-563 L 120v. Will this work? I want the color option. Thanks

 Reply

A  Answered on 7/23/2019 by InyoPools Product Specialist Lennox H.

Hi. This PureColors LED Fixture Kit - PL5831 will NOT fit without using a Universal Light Ring Adapter
 Reply

  • Commented on 7/23/2019 by Product Owner

    Thank you for the reply... So for clarity, As long as I get the universal ring, this particular model (PL5831 will work? How does the ring work, is it complicated to install, are there instructions or video?
     Reply

    • Commented on 7/25/2019 by InyoPools Product Specialist Hector F.

      So we do not have any instructions per se however IT IS HELD IN PLACE WITH 3 LONG SCREWS WHICH SCREW OUTWARDS TO HOLD THE FACE RING TIGHT AGAINST THE NICHE. THE AMERLITE WILL ATTACH TO THE ADAPTOR RING THE SAME WAY AS IT WOULD ATTACH TO A NICHE
       Reply


?     Asked on 7/20/2019by Clint

Your website states that this fixture will work in an Anythong Pools #20 niche. Can you confirm that? If it is compatible, is it a direct fit, or will modification be required? Like using the ring from the prior fixture, etc. Thanks for your help!

 Reply

A  Answered on 7/20/2019 by InyoPools Product Specialist Lennox H.

Hi, Clint. Unfortunately, this fixture is not compatible with the Model #20 niche. You can use use the Sta-Rite SwimQuip Fixture, or Hayward Universal ColorLogic Fixture as a replacement. 
 Reply


?     Asked on 7/19/2019by Ricky Blankenship

Light quit working and when opening it discovered that it has disintegrated. The whole fixture. Will this work on my 35+ yo pool The best I can tell the Flange is 10 1/8, Fixture 8, depth 7.5, 120 v. I would like to upgrade to a color changing LED light. Thank you
 Reply

A  Answered on 7/19/2019 by InyoPools Product Specialist Lennox H.

Hi, Ricky. You might be able to use this fixture if you have a compatible niche. You may need a Universal Light Ring Adapter
 Reply


?     Asked on 7/15/2019by Replacement fixture and bulb

Can you tell me if your PureColors LED Bulb & Pentair Amerlite Pool Light Fixture Kit is compatible with a Pac-Fab niche, Model L-660125? Thanks. Richard
 Reply

A  Answered on 7/16/2019 by InyoPools Product Specialist Rose J.

Hi. The model number provided is not the Pac-Fab model, it's the UL #. In order to use this fixture kit, you may need a Universal Light Ring Adapter.
 Reply

  • Commented on 7/16/2019 by Product Owner

    The only other number is "Model 66-101x fixture housing for light model 64-xxx." The niche is 5 1/2" deep with a diameter of 4 3/4". I believe this niche is about 1/2" too shallow for the light. Is there any type of adapter that will make it fit.
     Reply


?     Asked on 7/13/2019by Jared Thomas

Trying to replace Pentair Spectrum Amerilite (SAM) Light - 600015. Will this work?
 Reply

A  Answered on 7/16/2019 by InyoPools Product Specialist Hector F.

As long as you have the matching voltage, cord length and a deep niche designed for any Pentair pool light then yes this light will be a compatible replacement. 
 Reply


?     Asked on 7/12/2019by jeff webb

do I need a remote for the PureColors LED Bulb & Pentair Amerlite Pool Light Fixture Kit 120V 50' Cord - PL5831 and if I do how much is it
 Reply

A  Answered on 7/17/2019 by InyoPools Product Specialist Hector F.

No, you do not need a remote for the Purecolors LED light and bulb combination. You can control it by your light switch. As you turn it off and on you will cycle through the different colors and light shows. 
 Reply


?     Asked on 7/11/2019by Walter Carll

I'm trying to replace a very old pool light fixture for a 35,000 in ground pool. The existing pool light (no longer works) was made by Pool Star. I'm trying to figure out which light changing LED fixture will be compatible with my existing niche and which fixture will be bright enough to sufficiently illuminate my pool. The ballast itself (pictured) is 8 and 5/8 inches at it's widest diameter. The niche has only one screw hole at the top of its opening. A 50' cord is more than I need

 Reply

A  Answered on 7/19/2019 by InyoPools Product Specialist Lennox H.

Hi, Walter. This PureColors LED Pool Light Fixture Kit - PL5831 can be used as a replacement for your old Pool Star light.
 Reply


?     Asked on 7/4/2019by Tom

Hi, I have a Jandy LED light fixture that went dead. What is the equivalent model to order for your product? The Jandy model was CPHVLEDS50.

 Reply

A  Answered on 7/7/2019 by InyoPools Product Specialist Steve M.

Hi, Tom. In order to make a recommendation, we will need to know the model of the niche you have to ensure compatibility.
 Reply

  • Commented on 7/15/2019 by Product Owner

    The Niche is a Jandy model PLNCIVFLRG. Thanks
     Reply


A  Answered on 9/6/2019 by Product Owner

That is the exact same light that I have (that is dead) and I want to replace with a color changing LED light that hopefully will last longer and be compatible with my inside wall mounted control panel. This light had bad ratings. Were you able to find a replacement unit that you can recommend?
 Reply


?     Asked on 7/3/2019by Tommy Kubala

I ordered and received the the new light fixture I was thinking the color bulb would come installed.The instructions say to replace gasket when changing bulb it did not come with new gasket so do I use same gasket that came with new fixture? The reason I ordered new fixture is because I could not get a gasket to seal in my old one so I’m afraid to break the seal my new fixture has the wire band need advise
 Reply

A  Answered on 7/23/2019 by InyoPools Product Specialist Hector F.

Being that you purchased a complete new light assembly you do not need to purchase another one. 
 Reply


?     Asked on 7/2/2019by Tommy

I ordered and received this I thought the purecolors bulb would be in new fixture it came separate,installation instructions says replace gasket if you replace bulb, it did not come with new gasket the reason I ordered new fixture is because I tried 2 new gaskets on my old fixture and could not get it to seal, so I’m kinda nervous about opening this new fixture up its the one with the wire band need advise
 Reply

A  Answered on 10/15/2019 by InyoPools Product Specialist Steve M.

Tommy, you will be fine to open the lens on the PureLine PureColors LED Bulb & Pentair Amerlite Pool Light Fixture Kit 120V 50' Cord it will not void the warranty. The gasket has never been submerged so there is no reason to change it, you would just use the same gasket that came with the fixture.
 Reply


?     Asked on 7/1/2019by Kelley Blevins

We are trying to figure out if this will fit as a replacement for our pool light. Unfortunately we have no information of the brand of the light we are replacing. Pictures attached.

 Reply

A  Answered on 7/1/2019 by InyoPools Product Specialist Lennox H.

Hi, Kelley. Based on the pictures provided, you have a Pac Fab Hatteras Fixture. This PureColors LED Fixture Kit can be used as a replacement. 
 Reply


?     Asked on 6/25/2019by neil althoff

PureColors LED Bulb & Pentair Amerlite Pool Light Fixture Kit 120V 50' Cord - PL5831 Are you able to control the colors for the above LED pool light? Thanks! Neil
 Reply

A  Answered on 6/25/2019 by InyoPools Product Specialist Lennox H.

Hi, Neil. You the color changing feature of the bulb is controlled by a light switch. 
 Reply


?     Asked on 6/24/2019by Tommy Kubala

Will this replace 7885xx,7845xx,7895xx 500 watt,120volts,r40bulb
 Reply

A  Answered on 6/24/2019 by InyoPools Product Specialist Lennox H.

Hi, Tommy. Yes, this fixture can be used as a replacement. 
 Reply


?     Asked on 6/24/2019by Tommy Kubala

Will this replace 7885xx,7845xx,7895xx 500 watt,120 volt,r40 bulb?
 Reply

A  Answered on 6/24/2019 by InyoPools Product Specialist Lennox H.

Hi, Tommy. Yes, this fixture is a replacement.
 Reply


?     Asked on 6/19/2019by Jim Milinkovich

Do you think the PureColors LED Bulb and Fixture will replace my old light No. Y-727360 Series 600015, 600016, 600017, 60018, 60022

 Reply

A  Answered on 6/20/2019 by InyoPools Product Specialist Lennox H.

Hi, Jim. Yes, this PureColors LED Fixture Kit can be used as a replacement. 
 Reply


?     Asked on 6/15/2019by Don

My current fixture is made by American Products Co. Model CN-5. It also says R500BC on the label. Will this be compatible? Thanks!
 Reply

A  Answered on 6/16/2019 by InyoPools Product Specialist Patrick P.

Hi Don, Yes this light fixture will work on an American Products Co. Model CN-5 which says R500BC
 Reply


?     Asked on 6/5/2019by John Flannery

I currently have a Pentair series 784,788 or 789 my unit has all three numbers on it. Looks like it was installed January 2004. It is allowing water to enter the housing where the cord goes into the fixture. Will this new unit work for my pool. Also my pool is salt water and this current unit says fresh water only. Does that matter? Pictures attached

 Reply

A  Answered on 6/6/2019 by InyoPools Product Specialist Patrick P.

Hi John, Yes the PL5831 PureColors would work great for you and would replace the light fixture in your photos. Yes it will be fine to use this light in a salt pool application. That warning was put on pool light prior to the popularity of salt pools, it refers to not using the equipment in ocean water which is around 40,000 PPM of salt compared to a salt pool at 4,000 PPM.
 Reply


?     Asked on 6/4/2019by Troy Ruppert

I have a Hayward SP58 series light. Would this fit and is the quality comparable to a Hayward LED. In other words, would I be better off to spend more money on a Hayward replacement?
 Reply

A  Answered on 6/4/2019 by InyoPools Product Specialist Lennox H.

Hi, Troy. This fixture is not compatible with a Hayward niche. You can use the Hayward Astrolite along with the PureColors LED Bulb which our customer has expressed is better and more economical. 
 Reply


?     Asked on 6/3/2019by Inyo Visitor

Will this fit a Hayward SP-507 niche? l;i;ght coming out is Hayward SP-562-L
 Reply

A  Answered on 6/3/2019 by InyoPools Product Specialist Patrick P.

For the Hayward SP562-L you will need one of the light fixtures listed here Hayward DuraLite Light Fixtures along with one the LED Color Changing Bulbs listed on that same page.
 Reply

  • Commented on 6/3/2019 by Product Owner

    I was told PL5832 would also fit in my niche SP-507. Is this true?
     Reply

    • Commented on 6/6/2019 by InyoPools Product Specialist Patrick P.

      Hi Rocco, From my understanding, your SP-507 will only accommodate the DuraLight Light Fixture. I did see where you did place an order for the DuraLight if you want to upgrade the bulb that came with your DuraLight to LED Color Changing then you can do so with this PL5809 PureLine PureColors 120V LED Color Changing Bulb
       Reply


?     Asked on 6/2/2019by Dave

Hi....will the PureColors LED fit in and replace the Hayward ColorLogic SP0527LED30 ? Thanks !
 Reply

A  Answered on 6/2/2019 by InyoPools Product Specialist Patrick P.

Hi Dave, Yes the PL5831 PureColors Light Fixture will work as a replacement for the Hayward ColorLogic. The great thing about the PureColors is if the bulb ever goes bad then the bulb is replaceable by doing an easy bulb swap at $150, unlike the ColorLogic where you have to replace the entire fixture at $1,000 if the board goes bad. If you have multiple lights in your pool and/or spa then they will all need to be PureColors if you would like them to be on the same color rotation.
 Reply


?     Asked on 5/21/2019by paul

I have a Hayward Colorlogic SP0525SLED50 light in my pool, would this one fit in the niche...
 Reply

A  Answered on 5/21/2019 by InyoPools Product Specialist Patrick P.

Hi Paul, Yes the PureColors will fit in the same niche as the Hayward Colorlogic SP0525SLED50. The PureColors and ColorLogic don't synchronize together so if you have multiple Colorlogics you might consider replacing those with PureColors so they all synchronize together.
 Reply


?     Asked on 5/19/2019by Lou

Would the V2 bulb (PL5859) be compatible with this setup?
 Reply

A  Answered on 5/19/2019 by InyoPools Product Specialist Patrick P.

Hi Lou, Yes the V2 bulb would work on this setup.
 Reply


?     Asked on 5/17/2019by Kerrie

Will this work to replace a Jandy series CPHVLEDS50 0.4 amp 120 Volt fixture?
 Reply

A  Answered on 5/17/2019 by InyoPools Product Specialist Patrick P.

Hi Kerrie, Yes the PureLine PureColors will fit in the same niche as your Jandy series CPHVLEDS50 and would be a great replacement. Please note if you have more than one light in your pool and spa then you will need to have all the lights from the same manufacturer for there color rotation to synchronize. For example, if you had 2 pool lights and 1 spa light and you wanted them all to synchronize together then they would all need to PureLine PureColors.
 Reply


?     Asked on 5/13/2019by Diana

Does this combo come with the regular Pentair incandescent light gasket? Should I get the Guardian silicone gasket designed for longer lasting LED bulbs? Also, I currently have a Pentair 500W 120v Amerlite which needs replacement. Is it OK to replace that fixture with the 300W in this combo?
 Reply

A  Answered on 5/13/2019 by InyoPools Product Specialist Lennox H.

Hi, Diana. Yes, this kit includes the Lens Gasket (OEM) - 79101600. Yes, you can purchase the Guardian Silicone Lens Gasket - LPL-G-P for added protection. It is okay to use this as a replacement for your 500 watt fixture. 
 Reply


?     Asked on 5/12/2019by TERRI

I have just received the light not sure if it will work for a few weeks when the guys come to open my pool.Does this mean if there is a problem I will be out of luck ? There is no way it can be installed in 7 days! Thanks
 Reply

A  Answered on 5/12/2019 by InyoPools Product Specialist Hector F.

You have a 2 year warranty on the bulb, and a one year manufacturer warranty on the complete light fixture. 
 Reply


?     Asked on 5/5/2019by Storm

I have an iAqualink 2.0 management system. Do these bulbs work with that system? Maybe working like the Intellibrite bulbs? Thanks, Storm
 Reply

A  Answered on 5/5/2019 by InyoPools Product Specialist Patrick P.

Hi Storm, The Pure Colors Bulbs will work on the iAqualink but you will not get the color show readout on your iAqualink display. You will power the light auxiliary on and off within the AquaLink to get to your favorite color show. Once you find your favorite color show and set a timer on your iAquaLink then the Pure Colors does have memory so each night it will turn back on, on the color show which was last selected.
 Reply


?     Asked on 5/3/2019by Doug

Replacing a leaking Sta-Rite SunBrite grommet style light. 120v, 300w halogen bulb. I can’t ID the stainless wet niche but the light and niche are original install in 2001 so I assume it’s probably also Sta-Rite. Niche measures about 9.75” diameter and 8.75” deep. Face ring measures at 10 1/16” and has screw hole at top and tab at bottom. Wet niche has no other attachment point for ring except corresponding hole and tab locations. Will this Amerlite combo fit my niche?

 Reply

A  Answered on 5/3/2019 by InyoPools Product Specialist Lennox H.

Hi, Doug. Yes, this Pentair Amerlite Light LED Kit - PL5831 will fit into the same niche you have. 
 Reply


?     Asked on 4/29/2019by Ken

HI, is there a remote available for this light? thanks
 Reply

A  Answered on 4/29/2019 by InyoPools Product Specialist Patrick P.

Hi Ken, There is not a remote for this light, you would use a standard light switch to control the light.
 Reply


?     Asked on 4/28/2019by Jon Chirnside

Looking to replace my current light fixture, Hayward SP-561, with this PureColors/Pentair Light Fixture do the trick? Thanks!
 Reply

A  Answered on 4/29/2019 by InyoPools Product Specialist Lennox H.

Hi, Jon. The PureColors/Pentair Light Fixture Kit will not fit into the same niche as the Hayward SP-561 fixture. You can use the Hayward DuraLite Series Fixture.
 Reply


?     Asked on 4/22/2019by Mark Wartski

I have two pool lights I'm looking to replace with LED version (both require 120v cabled ... I'll have to check the length of each). Will these LED lights be light synchronized? Or is there an option that would allow this?
 Reply

A  Answered on 4/24/2019 by InyoPools Product Specialist Lennox H.

Hi, Mark. Two or more fixture operating on the same circuit will be able to sync. 
 Reply


?     Asked on 4/22/2019by Sheri

Will this light replace a purex A-501893?

 Reply

A  Answered on 4/22/2019 by InyoPools Product Specialist Lennox H.

Hi, Sheri. This fixture can be used in the same niche as this old Purex niche. 
 Reply


?     Asked on 4/15/2019by Jon

I have an older Hayward halogen light with a standard niche in my in ground pool. Id like to replace the entire light fixture with a new LED set up. The wiring going from the junction box to the transformer is #12 gauge. Is this wiring sufficient or will I need to replace the wiring too? Thank you.
 Reply

A  Answered on 4/19/2019 by InyoPools Product Specialist Patrick P.

Hi Jon, The 12 gauge wire will be sufficient for the new Pure Colors LED Light.
 Reply


?     Asked on 4/7/2019by Jay

I have 2 Jandy LED lights in my pool and they match color when I change etc. One is bad. If I replace just one of them with this light, how will it affect the color matching? Or will the Jandy controller still be able to choose different colors etc?
 Reply

A  Answered on 4/7/2019 by InyoPools Product Specialist Lennox H.

Hi, Jay. You will not be able to sync the light so they will have different colors. Since the lights will be on the same circuit, when one fixture change so will the other to it own preset color or show. 
 Reply


?     Asked on 1/27/2019by Ed

I have a 7821xxxx wet niche, will this light work? "salt water pool
 Reply

A  Answered on 1/28/2019 by InyoPools Product Specialist Lennox H.

Hi, Ed. Yes, this fixture kit will work. 
 Reply


?     Asked on 9/29/2018by Robert Jenkins

What is your return policy?
 Reply

A  Answered on 10/2/2018 by InyoPools Product Specialist Lennox H.

Hi, Robert. Use this link to view our complete Return Policy
 Reply


?     Asked on 9/25/2018by jay

I recently replaced one of the lights in my pool with the v.2 bulb PL5859. Would this kit be the same bulb so that my two fixtures would match?
 Reply

A  Answered on 10/9/2018 by InyoPools Product Specialist Joe S.

Good day, no the kit includes the V1 light not the V2. If you want to custom order a kit with the V2 please give us a call.
 Reply


?     Asked on 9/10/2018by Robin

I see other people asked if this light will work for a Jandy but they didn't give a model number. I just want to make it will work. I have the large Jandy light. Model number RO474100. Please advice me if this will fit and work for the Jandy. I really love being able to replace the bulb. The light only lasted three years and it's a lot of money every three years to replace. Reading all the reviews on Jandy three years is the normal for when it stops working. That's crazy expensive. Thank you
 Reply

A  Answered on 9/10/2018 by InyoPools Product Specialist Lennox H.

Hi, Robin. You can use this PureColors LED Pool Light Fixture Kit to replace your existing Jandy light fixture. 
 Reply

  • Commented on 4/7/2019 by Product Owner

    What if you have two of those Jandy R0474100 lights that match together when changing colors, etc? And you only replace one of them with this light? I'm guessing maybe I need to replace both of my Jandy's? And then the next question would be: Will my Jandy controller still be able to change colors or control the different colors for these new lights?
     Reply

    • Commented on 4/9/2019 by InyoPools Product Specialist Patrick P.

      Hi Jay, If you want both lights to be on the same color rotation then both lights will need to be from the same manufacturer so in your case if you were going with the Pure Colors and you wanted both lights synchronized then you would need to replace both lights. You will be able to control your lights through your control system by powering the lights on and off relatively quickly you will cycle through the different color shows. The nice thing about these lights are they have memory so say you set your lights on your controller to turn off at 11 PM and turn on at 7 PM when they turn on at 7 PM they will default to the last color show you had them on. This is nice once you find your favorite color show. Please note you will not see the color show readout on your Jandy AquaLink.
       Reply


?     Asked on 8/24/2018by Jim Hardy

I previous talked with Joe and he recommended the PL-5831 light as a replacement for my Pool Star fixture. It has a 425 housing and R40 500 bulb. He did want me to check the niche and it is 10". Will this work for me?
 Reply

A  Answered on 8/24/2018 by InyoPools Product Specialist Lennox H.

Hi, Jim. Yes, this fixture will work as a replacement. 
 Reply


?     Asked on 8/11/2018by Bob

I HAVE 2 LIGHTS IN MY POOL BOTH ARE PENTAIR COLOR LIGHTS MODEL # 7821XX NO. T-810143, 165WATTS 120 VOLTS BULB TYPE MR 16 - 75 WATTS BOTH COTROLED BY ONE JANDY RS 6. ONE ENTIRE UNIT NEEDS TO BE REPLACED AND THIS MODEL IS NO LONGER MADE. WHAT DO YOU RECOMMEND? CAN I SYNC. THE NEW LIGHT WITH THE OLD WITH MY JANDY RS6?
 Reply

A  Answered on 8/19/2018 by InyoPools Product Specialist Lennox H.

Hi, Bob. You can use this PureColors LED Light Fixture Kit - PL5831 or the Intellibrite LED Pool Light - 601001 as a replacement. 
 Reply


?     Asked on 8/1/2018by peter miale

Do you carry lube for pulling new light wire through conduit ? If so how much is needed for 50 ft of wire ? thanks
 Reply

A  Answered on 8/1/2018 by InyoPools Product Specialist Hector F.

We do not carry that lube but if you click here you will be directed to our guide for installing a pool light and on step 5 we describe the type of lube that we recommend using. 
 Reply


?     Asked on 7/24/2018by petermiale

the 35 w led bulb is equal too 300 w regular bulb, do you have higher than 35w led ; something that would equal 500 w ?
 Reply

A  Answered on 7/24/2018 by InyoPools Product Specialist Lennox H.

Hi, Petermiale. Unfortunately, we do not. 
 Reply


?     Asked on 7/11/2018by Mike

Will this fit a mid 70'S PUREX model 100-3, forming shell 425?
 Reply

A  Answered on 7/12/2018 by InyoPools Product Specialist Lennox H.

Hi, Mike. Yes, this Amerlite LED Light Fixture Kit - PL5831 will fit into the same niche as a mid 70's Purex fixture model 100-3. 
 Reply


?     Asked on 7/10/2018by Fulton

I have an American Standard 7884vv, 7845xx, 7895xx light that is about 16 years old and needs to be replaced. I want to make sure this fits before I order. Is American Standard the same a Amerilite now?
 Reply

A  Answered on 7/11/2018 by InyoPools Product Specialist Hector F.

Yes, this pool light will replace what you had. Just be sure that your light is 120 volts. 
 Reply


?     Asked on 7/6/2018by Herbert (again)

One more question: I believe what I have is Amerilite. Model is 7845××. Does this sound right. And number in niche is P-526473. Is that correct and will fit this light?
 Reply

A  Answered on 7/6/2018 by InyoPools Product Specialist Lennox H.

Hi, Herbert. Yes, that sounds right. This fixture will replace your existing fixture. 
 Reply


?     Asked on 7/6/2018by Herbert

Is there an option for a 100' cord with this model?
 Reply

A  Answered on 7/6/2018 by InyoPools Product Specialist Lennox H.

Hi, Herbert. The 100 ft option is Part # PL5832
 Reply


?     Asked on 7/6/2018by Herbert

I need to check which niche I have on my pool first of all. But the question is, which of the Pentair products would be a better option? This one? Or the Pentair Intellibrite? I see the benefit of only changing a bulb. But which is the best option in your opinion? Does one have better lighting?
 Reply

A  Answered on 7/6/2018 by InyoPools Product Specialist Lennox H.

Hi, Herbert. When it comes to better lighting, the Intellibrite will be better. This option will be best because of the versatility of the bulb option. 
 Reply


?     Asked on 7/5/2018by Franky

I have a Hayward color logic spo525sled50 that we control with a PDA. Will this unit work and can I still use the PDA to control it.
 Reply

A  Answered on 7/6/2018 by InyoPools Product Specialist Lennox H.

Hi, Franky. If you have a compatible niche, you can use this as a replacement. The PDA can be used to control this fixture by controlling the circuit. 
 Reply


?     Asked on 7/1/2018by Jeremy

I have a Hayward SP 0610C niche; is this light compatible? If not can you recommend some lighting options that are? Thanks!
 Reply

A  Answered on 7/1/2018 by InyoPools Product Specialist Lennox H.

Hi, Jeremy. I was not able to locate that Hayward Niche model. This Light Fixture Kit will fit selected Hayward Niche like the SP0600U or SP0607U. You can also use the Hayward Astrolite Fixture
 Reply


?     Asked on 6/26/2018by Inyo Visitor

will this fit a cn-5 housing?
 Reply

A  Answered on 6/26/2018 by InyoPools Product Specialist Lennox H.

Hi. Yes, this LED Pool Light Fixture Kit will fit into the CN-5 Niche. 
 Reply


?     Asked on 6/22/2018by Lonnie

My current pool light is a Pentair and I found model # 7824xx on a label. Will this LED light work to replace my current light?
 Reply

A  Answered on 6/22/2018 by InyoPools Product Specialist Lennox H.

Hi, Lonnie. The model # 7824xx is for the small niche. You can use the PL5841 or PL5861
 Reply


?     Asked on 6/11/2018by Joe Legard

does the PL5831 fixture seal water from going back into the conduit. If so, is there a gasket or what is used to seal the conduit. I am afraid I have a leak in my conduit between the junction box and fixture causing me to lose water in my pool. I currently have a Spectrum Amerlite (SAm) fixture which is about 16 years old and needs to be replaced. Also, is there a product to seal the conduit if it is leaking?
 Reply

A  Answered on 6/11/2018 by InyoPools Product Specialist Hector F.

These units do not have a seal to be used where the cord goes into the conduit. Some homeowners use clear rtv silicone to seal that hole in case of leaks. Click here to be directed to that item on our site. 
 Reply


?     Asked on 6/7/2018by colin

Hi - I have a clapped out Jacuzzi Q500 - Can I completely remove that and use this bulb and fixture combo in the jacuzzi niche?
 Reply

A  Answered on 6/8/2018 by InyoPools Product Specialist Lennox H.

Hi, Colin. I will need to know the model of you Jacuzzi niche in order to confirm compatibility. 
 Reply


?     Asked on 6/2/2018by Chris Boxall

I have a Jandy fixture Part #R0474100 with a matching Jandy large Niche. Will the Pentair Amerlite Pool Light fixture Kit with Pure Colors LED Bulb be a direct and easy replacement - I have already removed the Jandy light fixture and conduit, as it quit working. I did a measure of the niche - the lower set in indent (where the clip attaches) to the upper set screw was 9 inches (using the clip retaining screw and the set screw hole centers). The niche had a depth of around 9 inches also.
 Reply

A  Answered on 6/3/2018 by InyoPools Product Specialist Lennox H.

Hi, Chris. Yes, this Amerlite Pool Light Fixture Kit can be used as a replacement. 
 Reply


?     Asked on 6/1/2018by Dawn Grant

I am looking to replace a Hayward color logic inground salt pool light. It is a 10 pin. The wall of my pool is a 10 diameter hole. So I am assuming I can use any light. The diameter of the entire light with rim is 13. The only numbers I can find is E234517 or V250621 on the light. 120v max 50watts is on this light. The rim and light needs to be replaced. I operate it with a light switch. Can you tell me what I can get from you hopefully under 500.00 Thank you I'd like to overnight it also.
 Reply

A  Answered on 6/2/2018 by InyoPools Product Specialist Patrick P.

Hi Dawn, This PureColors LED Color Changing Light Fixture is what we would suggest as it will replace your Hayward ColorLogic. The nice thing about the PureColors unlike the Hayward ColorLogic is that if the bulb ever goes bad then on this PureColors light you can replace the bulb, where on the Hayward you cannot.
 Reply


?     Asked on 5/30/2018by jk

Is this light a direct replacement for an aqua lumin II light? Also, is the bulb readily available and a common bulb?
 Reply

A  Answered on 5/30/2018 by InyoPools Product Specialist Lennox H.

Hi, JK. The Aqualumin II light is a nicheless light fixture, this fixture requires a niche so it cannot be used to replace the Aqualumin II fixture. You can use the Aqualumin III Fixtures
 Reply


?     Asked on 5/29/2018by Bob

Hi, I have a Jandy Water Colors LED Pool Light, 120V that is in a Pentair quick niche. Would this combination be a replacement solution? I light the idea that I could replace the bulbs rather than putting in a new light, is that logic sound? What would I sacrifice (i.e. brightness, colors) etc with this option? Thanks for any advice.
 Reply

A  Answered on 5/29/2018 by InyoPools Product Specialist Patrick P.

Hi Bob, Yes this Light will work in your Quick Niche and I agree 100% about the replaceable bulbs. The PureColors would be my suggestion for your set up.
 Reply


?     Asked on 5/27/2018by Dave

I think the current light I have is Sta-Rite / Swimquip Pool Light by all my searches. This light has been badly damaged by high stabilizer levels (160+ppm) by the previous owner. all that was legible on the light was model 5057. the label disintegrated as I tried to lightly brush the corrosion off. I don't want to stick this back in the new pool water, even if I rebuild it. Will this light fit? I have confirmed 120V wiring. I also don't need 50' of cord, only 10'
 Reply

A  Answered on 5/28/2018 by InyoPools Product Specialist Lennox H.

Hi, Dave. Unfortunately, this fixture is not compatible. You can use the Swimquip Light Fixtures and LED Bulb.
 Reply


?     Asked on 5/26/2018by Susan Drabing

We have a wet niche pentair light and want to replace it all we are not sure what the model # is but the numbers are label #98700600, also we see bulb compatible with 7821xx 7822xx and 7823xx. Will this work? Can we use a remote control system with it like the intelibright?
 Reply

A  Answered on 5/27/2018 by InyoPools Product Specialist Lennox H.

Hi, Susan. Yes, this PureColors LED Fixture Kit - PL5831 is compatible with your niche. There is not an OEM remote for this fixture like the Intellibrite. 
 Reply


?     Asked on 5/24/2018by Darlene

I have Sam color changing lights. What led color changing light wound I need?
 Reply

A  Answered on 5/25/2018 by InyoPools Product Specialist Patrick P.

Hi Darlene, If you are looking at replacing your complete light fixture with cord then this PureColors light fixture will be a replacement for the SAM Light.
 Reply


?     Asked on 5/18/2018by Inyo Visitor

pl5831 pool light is this item includes all the light ? cord etc. a complete pool light ?
 Reply

A  Answered on 5/18/2018 by InyoPools Product Specialist Lennox H.

Hi. This PL5831 kit includes the Pentair Amerlite fixture and LED bulb. 
 Reply


?     Asked on 5/15/2018by David

I have a PAC-FAB fixture L-666143 which says use with fixture housing number 62-XXXX. What light fixture kit will work in my housing? I prefer just a plain light vs the colored ones. Thanks, David
 Reply

A  Answered on 5/15/2018 by InyoPools Product Specialist Patrick P.

Hi David, Yes the PL5831 PureColors Light Fixture would be a replacement for your Pac-Fab fixture housing number 62-XXXX
 Reply


?     Asked on 5/8/2018by Terry

I have a Pentair 792067XXX niche, will this lamp fit in my niche.
 Reply

A  Answered on 5/8/2018 by InyoPools Product Specialist Hector F.

Yes, this light would fit but this particular kit is not in stock. You can use one of these Pentair Amerlite fixtures that match your voltage and cord length needed by clicking here and the LED bulb you would use is our part number PL5809
 Reply


?     Asked on 5/8/2018by Lou

Hi - I'm looking to replace my Jandy Watercolor LED lights (120v). Would these fit into the same size niche?
 Reply

A  Answered on 5/8/2018 by InyoPools Product Specialist Patrick P.

Hi Lou, Yes the PureColors will fit in the same niche that the Jandy Water Colors fits into.
 Reply


?     Asked on 4/25/2018by jimmy

is this light housing and bulb compatible with a hayward plastic duraniche thats in a steel wall vinyl lined pool. thanks
 Reply

A  Answered on 4/25/2018 by InyoPools Product Specialist Lennox H.

Hi, Jimmy. This LED fixture kit is not compatible with the Hayward Dura Niche. I would recommend that you use the Hayward DuraLite Fixture and LED Bulb.
 Reply


?     Asked on 4/7/2018by Andy

I would like to replace the American Product R-100 BC with this light...will this work or will i need to change anything else?
 Reply

A  Answered on 4/10/2018 by InyoPools Product Specialist Lennox H.

Hi, Andy. The American Product R-100 BC is a 12 volt unit. You can use this fixture but will have to remove the transformer. Keeping your current set up with the transformer, I would recommend Part # PL5821
 Reply


?     Asked on 3/27/2018by Inyo Visitor

I have a Jacuzzi Q500 Pool light that I want to convert to LED. It's a 500W 120V candelabra base light. Will the PL5831 fixture be a direct replacement? Are there any other options you can suggest? Thanks in Advance
 Reply

A  Answered on 3/29/2018 by InyoPools Product Specialist Lennox H.

Hi, The only info I was able to find is from Commercial Aquatic Supplies which states that "If you wish to change to LED lights in the Jacuzzi Q 500 niche you will need the IDS Q 500 Adaptor Ring and the Pentair Intellibrite 5G Spa light." We do not carry that part and is unable to make any other recommendations unless you want to replace the niche and the light.  
 Reply


?     Asked on 2/20/2018by Alejandro

Hi, can this replace a model 78458100 lamp?
 Reply

A  Answered on 2/20/2018 by InyoPools Product Specialist Patrick P.

Hi Alejandro, Yes this Pure Colors LED Pool Light will replace the Pentair 78458100 light fixture
 Reply


?     Asked on 2/5/2018by Robert

Is this light rated for saltwater pool use and if not what light fixtures are rated for saltwater pools. Thank you
 Reply

A  Answered on 2/5/2018 by InyoPools Product Specialist Lennox H.

Hi, Robert. This fixture is rated for use in a saltwater pool up to 6,000 ppm salinity level.
 Reply


?     Asked on 11/23/2017by Inyo Visitor

can you order a remote
 Reply

A  Answered on 11/28/2017 by InyoPools Product Specialist Lennox H.

Hi. A remote is not available to control this fixture. 
 Reply


?     Asked on 9/13/2017by Debra

I have a Hayward Color Logic SP0525SLED100. in ground pool light. The GFI keeps tripping.I guess I need a new light for my pool. Is this light compatible with my niche and if it ins't...what light is?
 Reply

A  Answered on 9/15/2017 by InyoPools Product Specialist Lennox H.

Hi, Debra. They are some niches that are compatible with the Hayward  SP0525SLED100 Light and this Pentair Amerlite Pool Light. In order to confirm I will need to know the model of your niche. 
 Reply


?     Asked on 8/17/2017by Jim S.

I have an older model American Products R-500 BC that references Model No. CN-5 fixture. Will this light fit in the same niche? Thx, Jim
 Reply

A  Answered on 8/18/2017 by InyoPools Product Specialist Lennox H.

Hi, Jim S. Yes, this Pool Light Fixture Kit will fit into the same niche as the American Products R-500 BC fixture. 
 Reply


?     Asked on 6/15/2017by Rob

Will this product fit my Star-rite 05161 niche ??
 Reply

A  Answered on 6/16/2017 by InyoPools Product Specialist Lennox H.

Hi, Rob. Yes, the Amerlite fixture will fit the Sta-Rite Sun Niche 05161.
 Reply


?     Asked on 6/7/2017by Marty Peoples

I have a burned up American SAM light (I beliee that is now Pentair) Pretty sure my existying SAM is 120 V. It has a switch on the wall that you flip for different colors. I need to replace the entire light/chord/ whole thing. Will this work? Will it fit my existing opening. I have a gunite pool. Thanks so much Marty Peoples Fort Worth, Texas
 Reply

A  Answered on 6/7/2017 by InyoPools Product Specialist Hector F.

Yes, the Pentair Amerlite pool light will replace a Pentair Sam light. Just standard white unless you replace the standard bulb with one of the Pure Color LED bulbs.. Definitely would recommend confirming voltage and cord length needed.
 Reply


?     Asked on 4/2/2017by DANA GRIFFIN

I NEED TO PURCHASE ONLY THE FACE RING IN STERLIN SILVER. DO YOU SALE THAT PART ALONE AND WHAT IS PRICE
 Reply

A  Answered on 4/4/2017 by InyoPools Product Specialist Lennox H.

Hi, Dana. The S.S. Face Assembly - 79110600 and the Unitension Clamp Wire Assy - 79111000 are the parts that you need. Additional replacement parts for this light can be found on the Pentair Amerlite Pool Light Parts page.
 Reply


?     Asked on 2/18/2017by Steve

Is this unit compatible with the Spectrum Amerlite SAm by Pentair? How are color schemes changed?
 Reply

A  Answered on 2/19/2017 by InyoPools Product Specialist Patrick P.

Hi Steve, If you are replacing the complete light fixture and cord then the Pure Colors Light Fixture will fit in the same niche as the Spectrum Amerlite SAm without a problem. If you have other Spectrum Amerlite SAm lights in the pool or spa, then the Pure Colors will not synchronize with those lights. The color schemes are changed by powering the light on and off, normally this is through a standard light switch or an automated control system. So you just flip the light switch on and off relatively quickly to cycle through the color shows. We also have a Video on How to Replace a Pool Light Fixture which you may find helpful.
 Reply


?     Asked on 11/2/2016by Paul

Looking at this pool light. Question: how do you switch from stationary solid colors to the light show?
 Reply

A  Answered on 11/2/2016 by InyoPools Product Specialist Adam Y.

Good Afternoon Paul, you can change the lights and color shows using your on off switch.Here is a link to the users guideColor-Changing LED Light
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)