1. Home
  2. Pool Parts
  3. Pool Pump Parts
  4. PureLine Prime Pump - PL26 Series
  5. PL2645

By PureLine

Details

Top

Part # PL2645

Product Description

Pureline Prime 3 HP Impeller

Disclaimer:

All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.

Product Specifications

Manufacturer:
Pureline
Top
Ask A Question

?     Asked on 6/16/2018by Ray

Hi Could I put this impeller in the PL2603 2hp pump. Thanks Ray
 Reply

A  Answered on 6/16/2018 by InyoPools Product Specialist Lennox H.

Hi, Ray. You can, you will also have to change the motor to match which is the ST1302.
 Reply


?     Asked on 12/30/2020by Benny

How is Impeller removed. Seems to be connected to main shaft with its own shaft as the assembly is one piece. Need to replace shaft seal. Thanks Pump: PL604 3 HP.
 Reply

A  Answered on 12/31/2020 by InyoPools Product Specialist Hector F.

Hi Benny, these impellers are threaded to the motor shaft. Here is a guide that we put together called "How To Replace the Motor on Your Pool Pump" that should assist. 
 Reply


A  Answered on 12/31/2020 by Product Owner

What would be a good replacement motor for the Hayward RS2000 2.5 HP? Thanks
 Reply

  • Commented on 2/17/2021 by InyoPools Product Specialist Hector F.

    Hi Benny, if you can provide us with the motor part, model, catalog number, or an image of the motor label then we can confirm your replacement motor for you. 
     Reply


Top
Write A DIY Story
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Socket Set, Wrench Set, Adjustable Wrench

0     1

The pump stopped working and the pool is green

Written on 5/22/2020 by Guest

My lack of expertise repairing pool pumps put me in a great disadvantage. My other limitation was the lack of an appropriate tool. I bought 11/16, 13/16 and 15/16 sockets and none fitted the impellers’ bolt. I had to resort to other means to remove the old impeller. Once it was done, the rest was easy. New gaskets, new impeller and the pump is back to work.

Were these instructions helpful?